[i2c] Wrong sensors order for MSI K8MM-V (MS7142), chipset VIA K8M800-CE + VIA VT8237R

Mgr. Peter Tuharsky tuharsky at misbb.sk
Fri Oct 6 14:55:06 CEST 2006


Hallo

I'm posting my experience with sensors in order to make DB more 
accurate, so that less experienced users could gain the sensors give 
good results automatically, without need of tackling the sensors.conf

This is the result from MSI K8MM-V (MS7142), chipset VIA K8M800-CE + VIA 
VT8237R.

-Note the temp3 (probably should be CPU)

-VCore +1.55V is probably suitable for Athlon64 2800+ and the 1.94 is 
really out of order

-12V is between the interval limits, however ALARM is signalised. Maybe 
MIN and MAX values should be switched!

-CPU temp should be OK if bellow 70C

Please, if You need more info, or am I on wrong address, let me know and 
I'll do what I can.



w83627thf-isa-0290
Adapter: ISA adapter
VCore:     +1.55 V  (min =  +1.94 V, max =  +1.94 V)       ALARM
+12V:     +11.80 V  (min = +10.82 V, max = +13.19 V)
+3.3V:     +3.25 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +4.93 V  (min =  +4.75 V, max =  +5.25 V)
-12V:     -11.78 V  (min = -10.80 V, max = -13.18 V)       ALARM
V5SB:      +4.95 V  (min =  +4.76 V, max =  +5.24 V)
VBat:      +3.50 V  (min =  +2.40 V, max =  +3.60 V)
CPU Fan:     0 RPM  (min =   -1 RPM, div = 2)              ALARM
fan3:        0 RPM  (min = 6750 RPM, div = 2)              ALARM
M/B Temp:    +47°C  (high =    +1°C, hyst =    +0°C)   sensor = 
thermistor   ALARM
CPU Temp:  +52.5°C  (high =   +60°C, hyst =   +55°C)   sensor = thermistor
temp3:     +68.5°C  (high =   +60°C, hyst =   +55°C)   sensor = 
thermistor   ALARM
vid:      -0.025 V  (VRM Version 2.4)
alarms:
beep_enable:
           Sound alarm enabled



More information about the i2c mailing list