[i2c] [PATCH] ieee1394/pcilynx: I2C cleanups

[Jean Delvare]

* Delete optional and empty i2c client_register and client_unregister
  callbacks.
* Use the proper i2c adapter ID.
* Don't use a template to initialize the i2c_adapter structure, it's
  inefficient.
* Update a misleading comment on why we use i2c_transfer rather than
  higher level i2c functions.

Signed-off-by: Jean Delvare <khali at linux-fr.org>
---
 drivers/ieee1394/pcilynx.c |   26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

--- linux-2.6.23-rc5.orig/drivers/ieee1394/pcilynx.c	2007-09-08 13:49:29.000000000 +0200
+++ linux-2.6.23-rc5/drivers/ieee1394/pcilynx.c	2007-09-08 14:00:35.000000000 +0200
@@ -121,16 +121,6 @@ static int bit_getsda(void *data)
 	return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000010;
 }
 
-static int bit_reg(struct i2c_client *client)
-{
-	return 0;
-}
-
-static int bit_unreg(struct i2c_client *client)
-{
-	return 0;
-}
-
 static struct i2c_algo_bit_data bit_data = {
 	.setsda			= bit_setsda,
 	.setscl			= bit_setscl,
@@ -140,14 +130,6 @@ static struct i2c_algo_bit_data bit_data
 	.timeout		= 100,
 };
 
-static struct i2c_adapter bit_ops = {
-	.id 			= 0xAA, //FIXME: probably we should get an id in i2c-id.h
-	.client_register	= bit_reg,
-	.client_unregister	= bit_unreg,
-	.name			= "PCILynx I2C",
-};
-
-
 
 /*
  * PCL handling functions.
@@ -1436,9 +1418,11 @@ static int __devinit add_card(struct pci
         	struct i2c_algo_bit_data i2c_adapter_data;
 
         	error = -ENOMEM;
-		i2c_ad = kmemdup(&bit_ops, sizeof(*i2c_ad), GFP_KERNEL);
+		i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
         	if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
+		i2c_ad->id = I2C_HW_B_PCILYNX;
+		strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
                 i2c_adapter_data.data = lynx;
@@ -1465,8 +1449,8 @@ static int __devinit add_card(struct pci
                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
                                                 };
 
-                        /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
-                           do it more efficiently in one transaction rather then using several reads */
+			/* we use i2c_transfer because we have no i2c_client
+			   at hand */
                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {
                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
                         } else {

-- 
Jean Delvare