[i2c] [PATCH 2/3] i2c: Let bus drivers add SPD to their class

[Trent Piepho]

On Tue, 3 Jun 2008, Jon Smirl wrote:
> On 6/3/08, Trent Piepho <xyzzy at speakeasy.org> wrote:
> > On Tue, 3 Jun 2008, Jon Smirl wrote:
> >  > >  >  drivers/i2c/busses/i2c-elektor.c       |    2 +-
> >  > >  >  drivers/i2c/busses/i2c-gpio.c          |    2 +-
> >  > >  >  drivers/i2c/busses/i2c-i801.c          |    2 +-
> >  > >  >  drivers/i2c/busses/i2c-ibm_iic.c       |    4 ++--
> >  > >  >  drivers/i2c/busses/i2c-iop3xx.c        |    2 +-
> >  > >  >  drivers/i2c/busses/i2c-isch.c          |    2 +-
> >  > >  >  drivers/i2c/busses/i2c-mpc.c           |    2 +-
> >  >
> >  > Freescale embedded, no sticks
> >
> >
> > I know you're wrong about this one, because I have a Freescale board with
> >  an mpc i2c adapter with SPD SODIMMs on the I2C bus sitting right in front
> >  of me.  The whole reason I added hexdump support the I2C tools' SPD parser
> >  was so I could parse the SPD data by hexdumping the eeproms with busybox.
>
> Which CPU are you using? Maybe we should change to a socket.

MPC8572E, but U-Boot has support for programming the DRAM controller from
SPD data for a lot of Freescale chips.