[i2c] [PATCH] Remove trailing spaces from i2c/busses/Kconfig

[Wolfram Sang]

Subject: remove trailing whitespaces in i2c/busses/Kconfig
From: Wolfram Sang <w.sang at pengutronix.de>

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
 drivers/i2c/busses/Kconfig |   30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

Index: linux-playground/drivers/i2c/busses/Kconfig
===================================================================
--- linux-playground.orig/drivers/i2c/busses/Kconfig	2008-03-10 12:11:24.000000000 +0100
+++ linux-playground/drivers/i2c/busses/Kconfig	2008-03-10 12:12:11.000000000 +0100
@@ -135,7 +135,7 @@
 	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
 	  such an adapter.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called i2c-elektor.
 
 config I2C_GPIO
@@ -190,7 +190,7 @@
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the Intel
-	  810/815 family of mainboard I2C interfaces.  Specifically, the 
+	  810/815 family of mainboard I2C interfaces.  Specifically, the
 	  following versions of the chipset are supported:
 	    i810AA
 	    i810AB
@@ -248,8 +248,8 @@
 	tristate "IBM PPC 4xx on-chip I2C interface"
 	depends on IBM_OCP
 	help
-	  Say Y here if you want to use IIC peripheral found on 
-	  embedded IBM PPC 4xx based systems. 
+	  Say Y here if you want to use IIC peripheral found on
+	  embedded IBM PPC 4xx based systems.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-ibm_iic.
@@ -269,7 +269,7 @@
 	depends on ARCH_IXP2000
 	select I2C_ALGOBIT
 	help
-	  Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based 
+	  Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
 	  system and are using GPIO lines for an I2C bus.
 
 	  This support is also available as a module. If so, the module
@@ -354,7 +354,7 @@
 	  on the parport driver.  This is meant for embedded systems. Don't say
 	  Y here if you intend to say Y or M there.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called i2c-parport.
 
 config I2C_PARPORT_LIGHT
@@ -372,12 +372,12 @@
 	  the clean but heavy parport handling is not an option.  The
 	  drawback is a reduced portability and the impossibility to
 	  daisy-chain other parallel port devices.
-	  
+
 	  Don't say Y here if you said Y or M to i2c-parport.  Saying M to
 	  both is possible but both modules should not be loaded at the same
 	  time.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called i2c-parport-light.
 
 config I2C_PASEMI
@@ -401,7 +401,7 @@
 
 	  This driver is deprecated in favor of the savagefb driver.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called i2c-prosavage.
 
 config I2C_S3C2410
@@ -417,7 +417,7 @@
 	depends on PCI
 	select I2C_ALGOBIT
 	help
-	  If you say yes to this option, support will be included for the 
+	  If you say yes to this option, support will be included for the
 	  S3 Savage 4 I2C interface.
 
 	  This driver is deprecated in favor of the savagefb driver.
@@ -452,7 +452,7 @@
 
 	  If you don't know what to do here, say N.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called scx200_i2c.
 
 	  This driver is deprecated and will be dropped soon. Use i2c-gpio
@@ -483,14 +483,14 @@
 
 	  If you don't know what to do here, say N.
 
-	  This support is also available as a module.  If so, the module 
+	  This support is also available as a module.  If so, the module
 	  will be called scx200_acb.
 
 config I2C_SIS5595
 	tristate "SiS 5595"
 	depends on PCI
 	help
-	  If you say yes to this option, support will be included for the 
+	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
 
 	  This driver can also be built as a module.  If so, the module
@@ -500,7 +500,7 @@
 	tristate "SiS 630/730"
 	depends on PCI
 	help
-	  If you say yes to this option, support will be included for the 
+	  If you say yes to this option, support will be included for the
 	  SiS630 and SiS730 SMBus (a subset of I2C) interface.
 
 	  This driver can also be built as a module.  If so, the module
@@ -634,7 +634,7 @@
 	help
 	  This driver supports ISA boards using the Philips PCA9564
 	  parallel bus to I2C bus controller.
-	  
+
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pca-isa.
 
-- 
  Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://lists.lm-sensors.org/pipermail/i2c/attachments/20080310/eb087a91/attachment.bin