lm_sensors-2.6.[23] and gcc-3.1

Mark D. Studebaker mds at paradyne.com
Sat Jun 1 18:25:00 CEST 2002


don't know why the compiler breaks things or makes loading slow. 
If you figure it out let us know.
The min and max for negative voltages were backwards in 2.6.2,
fixed in 2.6.3 (see CHANGES file). Alarms should be correct
in 2.6.3. Be sure and do make install so that library is updated too.
There is an as99127f section in sensors.conf.


Andris Pavenis wrote:
> 
> Tried to upgrade lm_sensors-2.6.2 which works Ok now for me (compiled with
> with gcc-3.1 release, kernel version 2.4.19-pre9-ac5) to 2.6.3. Both kernel
> and lm_sensors were built with gcc-3.1
> 
> Here is what I'm getting from 2.6.2
> 
> bash-2.05a$ sensors
> as99127f-i2c-2-2d
> Adapter: SMBus I801 adapter at e800
> Algorithm: Non-I2C SMBus adapter
> VCore 1:   +1.63 V  (min =  +1.56 V, max =  +1.72 V)
> +3.3V:     +3.45 V  (min =  +3.13 V, max =  +3.45 V)
> +5V:       +5.02 V  (min =  +4.72 V, max =  +5.24 V)
> +12V:     +11.36 V  (min = +10.79 V, max = +13.19 V)
> -12V:     -11.56 V  (min = -10.73 V, max = -13.19 V)
> -5V:       -4.98 V  (min =  -4.74 V, max =  -5.24 V)
> fan1:     4115 RPM  (min = 1500 RPM, div = 4)
> temp1:       +33°C  (limit =  +60°C, hysteresis =  +50°C)
> temp2:     +35.8°C  (limit =  +67°C, hysteresis =  +60°C)
> vid:      +1.65 V
> alarms:   Chassis intrusion detection
> 
> bash-2.05a$
> 
> After upgrade w83781d modules takes about 100 seconds to load. I had one time
> similar problem with gcc-3.0.4 and one earlier kernel version. Compiling
> lm_sensors-2.6.3 with gcc-2.95.3 fixes long loading time, but sensors
> incorrectly signals alarm for -5V and -12V. This trouble goes away when I
> reverted to 2.6.2 (compiled with gcc-3.1).
> 
> I also didn't saw a section for aa99127f in new configuration file in 2.6.3
> source archive.
> 
> Andris



More information about the lm-sensors mailing list