Ticket #: 893 lm_sensors 2.6.4.cvs on Intel D850MV with kernel 2.4.18

[Thomas Lazic]

Hi,

thanks a lot for your answer
Now it appears that 2 boards are working and 9 do not.

All boards have the same bios version but we dont know anything about the
hardware revision. It is always the same type of board (Intel D850MV).

Please see below the output of sensors on the working board und i2cdump on
both the working and non-working board.

Regards.
Thomas


working board

host:/ # sensors
adm1025-i2c-1-2d
Adapter: SMBus I801 adapter at efa0
Algorithm: Non-I2C SMBus adapter
+2.5V:     +2.47 V  (min =  +2.22 V, max =  +2.72 V)   
VCore:     +1.44 V  (min =  +1.38 V, max =  +1.69 V)   
+3.3V:     +3.23 V  (min =  +2.93 V, max =  +3.59 V)   
+5V:       +4.97 V  (min =  +4.45 V, max =  +5.44 V)   
VCC:       +3.33 V  (min =  +2.93 V, max =  +3.59 V)   
SYS Temp:  +36.0C  (min =   +0C, max =  +60C) 
CPU Temp:  +37.0C  (min =   +0C, max =  +60C) 

eeprom-i2c-0-50
Adapter: bt848 #0
Algorithm: Bit-shift algorithm

eeprom-i2c-1-50
Adapter: SMBus I801 adapter at efa0
Algorithm: Non-I2C SMBus adapter

eeprom-i2c-1-51
Adapter: SMBus I801 adapter at efa0
Algorithm: Non-I2C SMBus adapter


host:/lm_sensors2/prog/dump# ./i2cdump 1 0x2d
Warning: no size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
  I will probe file /dev/i2c-1, address 0x2d, mode byte
  You have five seconds to reconsider and press CTRL-C!

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
10: 5b 5b 5b 5b 5b 00 5b 5b 5b 5b 5b 5b 5b 5b 5b 00    [[[[[.[[[[[[[[[.
20: be 7c bc bf 00 c2 24 24 5b 5b 5b d1 ab 91 76 d1    ?|??.?$$[[[???v?
30: ab d1 ab d1 ab d1 ab 3c 00 3c 00 5b 5b 5b 41 29    ???????<.<.[[[A)
40: 01 00 01 5b 5b 5b 5b 0e 5b 80 5b 5b 5b 5b 5b 5b    ?.?[[[[?[?[[[[[[
50: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
60: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
70: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
80: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
90: 5b 5b 5b 5b 5b 00 5b 5b 5b 5b 5b 5b 5b 5b 5b 00    [[[[[.[[[[[[[[[.
a0: be 7a bc bf 00 c2 25 24 5b 5b 5b d1 ab 91 76 d1    ?z??.?%$[[[???v?
b0: ab d1 ab d1 ab d1 ab 3c 00 3c 00 5b 5b 5b 41 29    ???????<.<.[[[A)
c0: 01 00 01 5b 5b 5b 5b 0e 5b 80 5b 5b 5b 5b 5b 5b    ?.?[[[[?[?[[[[[[
d0: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
e0: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[
f0: 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b 5b    [[[[[[[[[[[[[[[[

non-working board

host:/lm_sensors2/prog/dump# ./i2cdump 1 0x2d
Warning: no size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and
worse!
  I will probe file /dev/i2c-1, address 0x2d, mode byte
  You have five seconds to reconsider and press CTRL-C!

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
50: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
70: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
80: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
90: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
a0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
b0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
c0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
d0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
e0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
f0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX