Forcing the it87 chip with i2c-isa driver for sis630

Pere Castañer XaRz69 at terra.es
Fri May 17 15:49:58 CEST 2002


First of all I want to say thanks for your effort to do a great linux
software! 

Well I own a laptop clevo 2200 with sis630 integrated mainboard. I have
installed Debian Sid on it and I wanted to have the sensors up&runing
because this laptop is running to hot.

I installed the lm_sensors 2.6.3 and I wasted a lot of time and effort
to configure any driver and any chip sensor for this motherboard.
First of all Sis630 has a sis950 Chip for sensor detection because of it
I force the it87 to go with i2c-isa driver.

I do this:
modprobe i2c-isa [done]
modprobe it87 force_it87=9191,0x290[done!]

and the message for command sensors:

debian:~# sensors
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1:   +4.08 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
VCore 2:   +4.08 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
+3.3V:     +8.16 V  (min =  +8.16 V, max =  +8.16 V)   ALARM
+5V:       +6.85 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
+12V:     +16.32 V  (min = +16.32 V, max = +16.32 V)   ALARM
-12V:      +3.93 V  (min =  +3.93 V, max =  +3.93 V)   ALARM
-5V:       +4.03 V  (min =  +4.03 V, max =  +4.03 V)   ALARM
Stdby:     +6.85 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
VBat:      +4.08 V
fan1:        0 RPM  (min =    0 RPM, div = 128)          ALARM
fan2:        0 RPM  (min =    0 RPM, div = 128)          ALARM
fan3:        0 RPM  (min =    0 RPM, div = 2)          ALARM
Temp1/MB:     -1°C  (min =   -1°C, max =   -1°C) ALARM
Temp2/CPU:    -1°C  (min =   -1°C, max =   -1°C) ALARM
Temp3:        -1°C  (min =   -1°C, max =   -1°C) ALARM

is this correct? I forced the it87 but all the sensors are blank?
I need more configuration for know the cpu temp?

The problem is that I don't know if I'm doing it correctly...isn't it?
thanks for your time.

-- 
Pere Castañer Sardà							     
Linux Registered user #232073						     
Linux Debian GNU User-http://www.debian.org				     
Computer Science Engineering of Management student on UOC -
http://www.uoc.edu
-----------------------------------------------------------------------------|
GnuPG Fingerprint: D3D1 ABD8 E63A 3E02 0B03  997E C07B 1C68 C80C D044   
http://www.gnupg.org						             
-----------------------------------------------------------------------------|
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Esta parte del mensaje esta firmada digitalmente
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20020517/0d96802f/attachment.sig>


More information about the lm-sensors mailing list