#1353 still error!!

[Jean Delvare]

> OK, start from the beginning...
> I've checked on http://mbm.livewiredev.com/ that there's an ASB100
> chip inside my Asus TUSL2-C motherboard, then I've looked on 
> http://www2.lm-sensors.nu/~lm78/newdrivers.html for ASB100 and it
> says: Chip: ASB100 Bach, recognized as a as99127f, driver: w83781d,
> patched by mkpatch: yes. So this means the program knows my
> sensor-chip. I've started lm_sensors but it can't find any chip in my
> computer and I don't know why. So I attach it's whole output here
> because I can't solve this problem, I've tried almost everything (to
> the best of my knowledge)... I hope you aren't fed up with me. Please
> help me!

You *already* told us this, and you *already* sent the very same log.
What do you expect except the very same answer?

So I have to repeat myself. Sensors-detect can't detect your ASB100
until it is able to load the driver for the I2C bus your ASB100 is on.
You can see in the log you sent:

Load `i2c-i801' (say NO if built into your kernel)? (YES/no):
/lib/modules/2.4.18-4GB/kernel/drivers/i2c/busses/i2c-i801.o: 
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, 
including invalid IO or IRQ parameters
/lib/modules/2.4.18-4GB/kernel/drivers/i2c/busses/i2c-i801.o: insmod 
/lib/modules/2.4.18-4GB/kernel/drivers/i2c/busses/i2c-i801.o failed
/lib/modules/2.4.18-4GB/kernel/drivers/i2c/busses/i2c-i801.o: insmod 
i2c-i801 failed
Loading failed... skipping.

The problem is *here* and as long as we can't solve it, we won't go any
further.

So I ask my question again: ANY MESSAGE IN THE LOGS?

Take a look at /var/log/messages, /var/log/syslog or wherever your
system logs this kind of information. You should see something like:

i2c-core.o: i2c core module version 2.8.0 (20030714)
i2c-i801 version 2.8.0 (20030714)

And hopefully some useful error messages.

-- 
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/