sensors-detect segmentation fault.
Bram Havers
Bram_Havers at nl.ibm.com
Mon Aug 18 18:14:14 CEST 2003
Hi,
I've installed lm_sensors and i2c on my Via Epia ME6000 with Red Hat 9.
When i run sensors-detect it ends with a segmentation fault after which
only a reboot helps to kill the processes
Below i've posted what appears on the console, dmseg and lsmod.
Hope you can help. Thanks.
------------- on console ------
BIOS vendor (ACPI): VT9174
System vendor (DMI): VIA Technologies, Inc.
BIOS version (DMI): 6.00 PG
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 00:11.0: VIA Technologies VT8233A/8235
South Bridge
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Load `i2c-viapro' (say NO if built into your kernel)? (YES/no):
Module loaded succesfully.
Do you now want to be prompted for non-detectable adapters? (yes/NO):
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no):
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang
halfway
through; we can't really help that. Also, some chips will be double
detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you
can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Segmentation fault
---------- end ----
----------dmesg ----
via82cxxx: board #1 at 0xE400, IRQ 10
i2c-core.o: i2c core module version 2.8.0 (20030714)
i2c-viapro.o version 2.6.5 (20020915)
i2c-viapro.o: Found Via VT8233A/8235 device
i2c-viapro.o: Via Pro SMBus detected and initialized
i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714)
i2c-dev.o: Registered 's Via Pro adapter at 0500' as minor 0
Unable to handle kernel NULL pointer dereference at virtual address
0000002c
printing eip:
ce951860
*pde = 00000000
Oops: 0000
i2c-dev i2c-viapro i2c-core via82cxxx_audio uart401 ac97_codec sound
soundcore parport_pc lp parpo
rt ipsec autofs via-rhine mii ipt_REJECT iptable_filter ip_t
CPU: 0
EIP: 0060:[<ce951860>] Not tainted
EFLAGS: 00010206
EIP is at read_bus_i2c [i2c-core] 0x74 (2.4.20-19.9)
eax: 00000000 ebx: 00000000 ecx: c0a15000 edx: ffffffff
esi: 00000006 edi: c0a15000 ebp: 00000c00 esp: c03b3f30
ds: 0068 es: 0068 ss: 0068
Process sensors-detect (pid: 4865, stackpage=c03b3000)
Stack: c0a15000 ce953e30 00000000 ce955b60 00000000 00001000 082a5000
c88d39c0
00000c00 c0a15000 00001000 c0160f66 c0a15000 c03b3f88 00000000
00000c00
c03b3f84 00000000 c03b2000 c88d39c0 00000000 00000000 00000000
082a4280
Call Trace: [<ce953e30>] .rodata.str1.1 [i2c-core] 0x0 (0xc03b3f34))
[<ce955b60>] core_lists [i2c-core] 0x0 (0xc03b3f3c))
[<c0160f66>] proc_file_read [kernel] 0xb6 (0xc03b3f5c))
[<c013ff65>] sys_read [kernel] 0x85 (0xc03b3f9c))
[<c0109103>] system_call [kernel] 0x33 (0xc03b3fc0))
Code: 8b 50 2c 83 c4 10 85 d2 74 52 8b 40 28 85 c0 74 40 83 ec 08
---------- end ----
-------- lsmod -----
Module Size Used by Not tainted
i2c-dev 4992 0 (unused)
i2c-viapro 4816 0 (unused)
i2c-core 19556 1 [i2c-dev i2c-viapro]
via82cxxx_audio 22328 0 (autoclean)
uart401 8036 0 (autoclean) [via82cxxx_audio]
ac97_codec 13160 0 (autoclean) [via82cxxx_audio]
sound 70132 0 (autoclean) [via82cxxx_audio uart401]
soundcore 6116 4 (autoclean) [via82cxxx_audio sound]
parport_pc 17508 1 (autoclean)
lp 8580 0 (autoclean)
parport 33952 1 (autoclean) [parport_pc lp]
ipsec 263264 2
autofs 12148 0 (autoclean) (unused)
via-rhine 15344 1
mii 3720 0 [via-rhine]
ipt_REJECT 3736 2 (autoclean)
iptable_filter 2316 1 (autoclean)
ip_tables 14488 2 [ipt_REJECT iptable_filter]
ohci1394 18600 0 (unused)
ieee1394 45388 0 [ohci1394]
keybdev 2752 0 (unused)
mousedev 5236 0
hid 20868 0 (unused)
input 5632 0 [keybdev mousedev hid]
usb-uhci 24684 0 (unused)
ehci-hcd 18568 0 (unused)
usbcore 73280 1 [hid usb-uhci ehci-hcd]
ext3 64704 2
jbd 47860 2 [ext3]
-------------- end ---
Bram Havers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030818/c629d811/attachment.html
More information about the lm-sensors
mailing list