help?

Claudio Destri destri at mib.infn.it
Tue Feb 25 23:53:14 CET 2003


I have installed lm_sensors on a dual Athlon MP2200+ Tyan motherboard.
A Winbond chip is detected and this is the evidently wrong output of 
sensors:

w83627hf-i2c-0-2c
Adapter: SMBus AMD7X6 adapter at 80e0
Algorithm: Non-I2C SMBus adapter
VCore 1:   +1.66 V  (min =  +1.48 V, max =  +1.80 V)              
VCore 2:   +1.66 V  (min =  +1.48 V, max =  +1.80 V)              
+3.3V:     +3.29 V  (min =  +2.97 V, max =  +3.63 V)              
+5V:       +4.89 V  (min =  +4.50 V, max =  +5.48 V)              
+12V:      +9.42 V  (min = +10.79 V, max = +13.11 V)              
-12V:     -12.29 V  (min = -13.21 V, max = -10.90 V)              
-5V:       +0.01 V  (min =  -5.51 V, max =  -4.51 V)              
V5SB:      +5.38 V  (min =  +4.50 V, max =  +5.48 V)              
VBat:      +3.28 V  (min =  +2.70 V, max =  +3.29 V)              
fan1:     2721 RPM  (min = 3000 RPM, div = 2)                     
fan2:     2848 RPM  (min = 3000 RPM, div = 2)                     
fan3:        0 RPM  (min = 1500 RPM, div = 4)                     
temp1:       +67°C  (limit =  +60°C, hysteresis =  +50°C) sensor = 
PII/Celeron diode           
temp2:      +1.5°C  (limit =  +60°C, hysteresis =  +50°C) sensor = 
PII/Celeron diode           
temp3:      +3.5°C  (limit =  +60°C, hysteresis =  +50°C) sensor = 
PII/Celeron diode           
vid:       +1.65 V
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm disabled


What should I do? Perhaps changing from "PII/Celeron diode" according to 
the suggestion in /usr/share/doc/lm_sensors-2.6.3/doc/chips/w83781d 

        sensor[1-3]: (782d/783s only)
          Controls the sensor type. To change to a different
          sensor type, for example, do 'echo 2 > sensor1'.
          Valid values:
               1: Pentium II / Celeron diode
               2: 2N3904 Transistor in a diode configuration
            3435: Thermistor with Beta = 3435. Beta is a measure
                  of sensitivity to temperature.
 

But I haven't quite understood how.

-- 
			CLAUDIO DESTRI   Claudio.Destri at mib.infn.it
                        DIPARTIMENTO DI FISICA G. OCCHIALINI,
                        UNIVERSITA` MILANO-BICOCCA
                        PIAZZA DELLA SCIENZA 3, 20126 MILANO
                        tel: (39)(2)64482539  fax: (39)(2)64482585



More information about the lm-sensors mailing list