[PATCH] More i2c driver changes for 2.5.70

Greg KH greg at kroah.com
Wed Jun 11 22:36:46 CEST 2003


ChangeSet 1.1419.1.4, 2003/06/11 11:43:02-07:00, peterm at remware.demon.co.uk

[PATCH] I2C: add New bus driver: XSCALE iop3xx


 drivers/i2c/Kconfig      |    4 
 drivers/i2c/Makefile     |    1 
 drivers/i2c/i2c-iop3xx.c |  565 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/i2c-iop3xx.h |  120 +++++++++
 4 files changed, 690 insertions(+)


diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig	Wed Jun 11 13:25:23 2003
+++ b/drivers/i2c/Kconfig	Wed Jun 11 13:25:23 2003
@@ -193,6 +193,10 @@
 	tristate "IBM on-chip I2C Adapter"
 	depends on I2C_IBM_OCP_ALGO
 
+config I2C_IOP3XX
+	tristate "Intel XScale IOP3xx on-chip I2C interface"
+	depends on ARCH_IOP3XX && I2C
+
 config I2C_CHARDEV
 	tristate "I2C device interface"
 	depends on I2C
diff -Nru a/drivers/i2c/Makefile b/drivers/i2c/Makefile
--- a/drivers/i2c/Makefile	Wed Jun 11 13:25:23 2003
+++ b/drivers/i2c/Makefile	Wed Jun 11 13:25:23 2003
@@ -16,4 +16,5 @@
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_I2C_SENSOR)	+= i2c-sensor.o
+obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-y				+= busses/ chips/
diff -Nru a/drivers/i2c/i2c-iop3xx.c b/drivers/i2c/i2c-iop3xx.c
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/i2c-iop3xx.c	Wed Jun 11 13:25:23 2003
@@ -0,0 +1,565 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx                */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+/*
+   With acknowledgements to i2c-algo-ibm_ocp.c by 
+   Ian DaSilva, MontaVista Software, Inc. idasilva at mvista.com
+
+   And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
+
+     Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
+   
+   And which acknowledged Kyösti Mälkki <kmalkki at cc.hut.fi>,
+   Frodo Looijaard <frodol at dds.nl>, Martin Bailey<mbailey at littlefeet-inc.com>
+
+  ---------------------------------------------------------------------------*/
+
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+
+
+#include <asm/arch-iop3xx/iop321.h>
+#include <asm/arch-iop3xx/iop321-irqs.h>
+#include "i2c-iop3xx.h"
+
+
+/* ----- global defines ----------------------------------------------- */
+#define PASSERT(x) do { if (!(x) ) \
+                printk(KERN_CRIT "PASSERT %s in %s:%d\n", #x, __FILE__, __LINE__ );\
+        } while (0)
+
+
+/* ----- global variables ---------------------------------------------	*/
+
+
+static inline unsigned char iic_cook_addr(struct i2c_msg *msg) 
+{
+	unsigned char addr;
+
+	addr = ( msg->addr << 1 );
+
+	if (msg->flags & I2C_M_RD )
+		addr |= 1;
+
+/* PGM: what is M_REV_DIR_ADDR - do we need it ?? */
+	if (msg->flags & I2C_M_REV_DIR_ADDR )
+		addr ^= 1;
+
+	return addr;   
+}
+
+
+static inline void iop3xx_adap_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	// Follows devman 9.3
+	*iop3xx_adap->biu->CR = IOP321_ICR_UNIT_RESET;
+	*iop3xx_adap->biu->SR = IOP321_ISR_CLEARBITS;
+	*iop3xx_adap->biu->CR = 0;
+} 
+
+static inline void iop3xx_adap_set_slave_addr(
+	struct i2c_algo_iop3xx_data *iop3xx_adap )
+{
+	*iop3xx_adap->biu->SAR = MYSAR;
+}
+
+static inline void iop3xx_adap_enable( 
+	struct i2c_algo_iop3xx_data *iop3xx_adap )
+{
+	u32 cr = IOP321_ICR_GCD|IOP321_ICR_SCLEN|IOP321_ICR_UE;
+
+/* NB SR bits not same position as CR IE bits :-( */
+	iop3xx_adap->biu->SR_enabled = 
+		IOP321_ISR_ALD|IOP321_ISR_BERRD|
+		IOP321_ISR_RXFULL|IOP321_ISR_TXEMPTY;
+
+	cr |= IOP321_ICR_ALDIE|IOP321_ICR_BERRIE|
+		IOP321_ICR_RXFULLIE|IOP321_ICR_TXEMPTYIE;
+
+	*iop3xx_adap->biu->CR = cr;
+}
+
+static void iop3xx_adap_transaction_cleanup( 
+	struct i2c_algo_iop3xx_data *iop3xx_adap )
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	
+	cr &= ~(IOP321_ICR_MSTART | IOP321_ICR_TBYTE | 
+		IOP321_ICR_MSTOP | IOP321_ICR_SCLEN );
+	*iop3xx_adap->biu->CR = cr;
+}
+
+static void iop3xx_adap_final_cleanup( 
+	struct i2c_algo_iop3xx_data *iop3xx_adap )
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	
+	cr &= ~(IOP321_ICR_ALDIE|IOP321_ICR_BERRIE|
+		IOP321_ICR_RXFULLIE|IOP321_ICR_TXEMPTYIE);
+	iop3xx_adap->biu->SR_enabled = 0;
+	*iop3xx_adap->biu->CR = cr;
+}
+
+
+
+static void iop3xx_i2c_handler( int this_irq, 
+				void *dev_id, 
+				struct pt_regs *regs) 
+/* 
+ * NB: the handler has to clear the source of the interrupt! 
+ * Then it passes the SR flags of interest to BH via adap data
+ */
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
+
+	u32 sr = *iop3xx_adap->biu->SR;
+
+	if ( (sr &= iop3xx_adap->biu->SR_enabled) ){
+		*iop3xx_adap->biu->SR = sr;
+		iop3xx_adap->biu->SR_received |= sr;
+		wake_up_interruptible(&iop3xx_adap->waitq);
+	}
+}
+
+
+static int iop3xx_adap_error( u32 sr )
+// check all error conditions, clear them , report most important
+{
+	int rc = 0;
+
+	if ( (sr&IOP321_ISR_BERRD) ) {
+		if ( !rc ) rc = -I2C_ERR_BERR;
+	}
+	if ( (sr&IOP321_ISR_ALD) ){
+		if ( !rc ) rc = -I2C_ERR_ALD;		
+	}
+	return rc;	
+}
+
+static inline u32 get_srstat( struct i2c_algo_iop3xx_data *iop3xx_adap  )
+{
+	unsigned long flags;
+	u32 sr;
+
+	spin_lock_irqsave( &iop3xx_adap->lock, flags );
+	sr = iop3xx_adap->biu->SR_received;
+	iop3xx_adap->biu->SR_received = 0;
+	spin_unlock_irqrestore( &iop3xx_adap->lock, flags );
+
+	return sr;
+}
+
+/*
+ * sleep until interrupted, then recover and analyse the SR
+ * saved by handler
+ */
+typedef int (* CompareFunc)( unsigned test, unsigned mask );
+/* returns 1 on correct comparison */
+
+static int iop3xx_adap_wait_event( struct i2c_algo_iop3xx_data *iop3xx_adap, 
+			    unsigned flags, unsigned* status,
+			    CompareFunc compare )
+{
+	unsigned sr = 0;
+	int interrupted;
+	int done;
+	int rc;
+
+	do {
+		interrupted = wait_event_interruptible_timeout (
+			iop3xx_adap->waitq,
+			(done = compare( sr = get_srstat(iop3xx_adap),flags )),
+			iop3xx_adap->timeout
+			);
+		if ( (rc = iop3xx_adap_error( sr )) < 0 ){
+			*status = sr;
+			return rc;
+		}else if ( !interrupted ){
+			*status = sr;
+			return rc = -ETIMEDOUT;
+		}
+	} while( !done );
+
+	*status = sr;
+
+	return rc = 0;
+}
+
+
+
+
+/*
+ * Concrete CompareFuncs 
+ */
+static int all_bits_clear( unsigned test, unsigned mask ) {
+	return (test&mask) == 0;
+}
+static int any_bits_set( unsigned test, unsigned mask ) {
+	return (test&mask) != 0;
+}
+
+
+static int iop3xx_adap_wait_tx_done(
+	struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, 
+	        IOP321_ISR_TXEMPTY|IOP321_ISR_ALD|IOP321_ISR_BERRD,
+		status, any_bits_set );
+}
+
+static int iop3xx_adap_wait_rx_done(
+	struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, 
+		IOP321_ISR_RXFULL|IOP321_ISR_ALD|IOP321_ISR_BERRD,
+		status,	any_bits_set );
+}
+
+static int iop3xx_adap_wait_idle(
+	struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, IOP321_ISR_UNITBUSY, status, all_bits_clear );
+}
+
+//
+// Description: This performs the IOP3xx initialization sequence
+// Valid for IOP321. Maybe valid for IOP310?.
+//
+static int iop3xx_adap_init (struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	*IOP321_GPOD &= ~(iop3xx_adap->channel==0?
+			  IOP321_GPOD_I2C0:
+			  IOP321_GPOD_I2C1);
+
+	iop3xx_adap_reset( iop3xx_adap );
+	iop3xx_adap_set_slave_addr( iop3xx_adap );
+	iop3xx_adap_enable( iop3xx_adap );
+	
+        return 0;
+}
+
+static int iop3xx_adap_send_target_slave_addr( 
+	struct i2c_algo_iop3xx_data *iop3xx_adap, struct i2c_msg* msg )
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	*iop3xx_adap->biu->DBR = iic_cook_addr( msg );
+	
+	cr &= ~(IOP321_ICR_MSTOP|IOP321_ICR_NACK);
+	cr |= IOP321_ICR_MSTART | IOP321_ICR_TBYTE;
+
+	*iop3xx_adap->biu->CR = cr;
+	rc = iop3xx_adap_wait_tx_done( iop3xx_adap, &status );
+/* this assert fires every time, contrary to IOP manual	
+	PASSERT( (status&IOP321_ISR_UNITBUSY)!=0 );
+*/
+	PASSERT( (status&IOP321_ISR_RXREAD)==0 );
+	     
+	return rc;
+}
+
+static int iop3xx_adap_write_byte( 
+	struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, int stop )
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	*iop3xx_adap->biu->DBR = byte;
+	cr &= ~IOP321_ICR_MSTART;
+	if ( stop ){
+		cr |= IOP321_ICR_MSTOP;
+	}else{
+		cr &= ~IOP321_ICR_MSTOP;
+	}
+	*iop3xx_adap->biu->CR = cr |= IOP321_ICR_TBYTE;
+	rc = iop3xx_adap_wait_tx_done( iop3xx_adap, &status );
+
+	return rc;
+} 
+
+static int iop3xx_adap_read_byte(
+	struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, int stop )
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	cr &= ~IOP321_ICR_MSTART;
+
+	if ( stop ){
+		cr |= IOP321_ICR_MSTOP|IOP321_ICR_NACK;
+	}else{
+		cr &= ~(IOP321_ICR_MSTOP|IOP321_ICR_NACK);
+	}
+	*iop3xx_adap->biu->CR = cr |= IOP321_ICR_TBYTE;
+
+	rc = iop3xx_adap_wait_rx_done( iop3xx_adap, &status );
+
+	*byte = *iop3xx_adap->biu->DBR;
+
+	return rc;
+}
+
+
+static int iop3xx_i2c_writebytes( struct i2c_adapter *i2c_adap, 
+				  const char *buf, int count )
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for ( ii = 0; rc == 0 && ii != count; ++ii ){
+		rc = iop3xx_adap_write_byte(iop3xx_adap, buf[ii], ii==count-1);
+	}
+	return rc;
+}
+
+
+static int iop3xx_i2c_readbytes( struct i2c_adapter *i2c_adap, 
+				 char *buf, int count )
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for ( ii = 0; rc == 0 && ii != count; ++ii ){
+		rc = iop3xx_adap_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
+	}
+	return rc;
+}
+
+
+/*
+ * Description:  This function implements combined transactions.  Combined
+ * transactions consist of combinations of reading and writing blocks of data.
+ * FROM THE SAME ADDRESS
+ * Each transfer (i.e. a read or a write) is separated by a repeated start
+ * condition.
+ */
+
+static int iop3xx_handle_msg(
+	struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg ) 
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int rc;
+
+	rc = iop3xx_adap_send_target_slave_addr( iop3xx_adap, pmsg );
+	if ( rc < 0 ){
+		return rc;
+	}
+
+	if ( (pmsg->flags&I2C_M_RD) ){
+		return iop3xx_i2c_readbytes( i2c_adap, pmsg->buf, pmsg->len );
+	}else{
+		return iop3xx_i2c_writebytes( i2c_adap, pmsg->buf, pmsg->len );
+	}
+}
+
+
+
+/*
+ * master_xfer() - main read/write entry
+ */
+static int iop3xx_master_xfer(
+	struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num )
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int im = 0;
+	int ret = 0;
+	int status;
+
+	iop3xx_adap_wait_idle( iop3xx_adap, &status );
+	iop3xx_adap_reset( iop3xx_adap );
+	iop3xx_adap_enable( iop3xx_adap );
+
+	for ( im = 0; ret == 0 && im != num; ++im ){
+		ret = iop3xx_handle_msg( i2c_adap, &msgs[im] );
+	}
+
+	iop3xx_adap_transaction_cleanup( iop3xx_adap );
+
+	return ret;   
+}
+
+
+
+static int algo_control(struct i2c_adapter *adapter, 
+	unsigned int cmd, unsigned long arg)
+{
+	return 0;
+}
+
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C|I2C_FUNC_SMBUS_EMUL;
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm iic_algo = {
+	.name		= "IOP3xx I2C algorithm",
+	.id		= I2C_ALGO_OCP_IOP3XX,
+	.master_xfer	= iop3xx_master_xfer,
+	.algo_control	= algo_control,
+	.functionality	= iic_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+
+
+static int i2c_iop3xx_add_bus(struct i2c_adapter *iic_adap)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = iic_adap->algo_data;
+
+	if ( !request_region( REGION_START(iop3xx_adap), 
+			      REGION_LENGTH(iop3xx_adap),
+			      iic_adap->name ) ){
+		return -ENODEV;
+	}
+			      
+	init_waitqueue_head( &iop3xx_adap->waitq );
+	spin_lock_init( &iop3xx_adap->lock );
+
+	if ( request_irq( 
+		     iop3xx_adap->biu->irq,
+		     iop3xx_i2c_handler,
+		     /* SA_SAMPLE_RANDOM */ 0,
+		     iic_adap->name,
+		     iop3xx_adap )          ){
+		return -ENODEV;
+	}			  
+
+/* register new iic_adapter to i2c module... */
+
+	iic_adap->id |= iic_algo.id;
+	iic_adap->algo = &iic_algo;
+
+	iic_adap->timeout = 100;	/* default values, should	*/
+	iic_adap->retries = 3;		/* be replaced by defines	*/
+
+	iop3xx_adap_init( iic_adap->algo_data );
+	i2c_add_adapter(iic_adap);
+	return 0;
+}
+
+
+static int i2c_iop3xx_del_bus(struct i2c_adapter *iic_adap)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = iic_adap->algo_data;
+
+	iop3xx_adap_final_cleanup( iop3xx_adap );
+	free_irq( iop3xx_adap->biu->irq, iop3xx_adap );
+
+	release_region( REGION_START(iop3xx_adap), REGION_LENGTH(iop3xx_adap));
+
+	return i2c_del_adapter( iic_adap );
+}
+
+#ifdef CONFIG_ARCH_IOP321
+
+static struct iop3xx_biu biu0 = {
+	.CR     = IOP321_ICR0,
+	.SR     = IOP321_ISR0,
+	.SAR    = IOP321_ISAR0,
+	.DBR    = IOP321_IDBR0,
+	.BMR    = IOP321_IBMR0,
+	.irq    = IRQ_IOP321_I2C_0
+};
+
+static struct iop3xx_biu biu1 = {
+	.CR     = IOP321_ICR1,
+	.SR     = IOP321_ISR1,
+	.SAR    = IOP321_ISAR1,
+	.DBR    = IOP321_IDBR1,
+	.BMR    = IOP321_IBMR1,
+	.irq    = IRQ_IOP321_I2C_1
+};
+
+#define ADAPTER_NAME_ROOT "IOP321 i2c biu adapter "
+#else
+#error Please define the BIU struct iop3xx_biu for your processor arch
+#endif
+
+static struct i2c_algo_iop3xx_data  algo_iop3xx_data0 = {
+	.channel                = 0,
+	.biu                    = &biu0,
+	.timeout                = 1*HZ
+};
+static struct i2c_algo_iop3xx_data  algo_iop3xx_data1 = {
+        .channel                = 1,
+	.biu                    = &biu1,
+	.timeout                = 1*HZ
+};
+
+static struct i2c_adapter iop3xx_ops0 = {
+	.owner			= THIS_MODULE,
+	.name			= ADAPTER_NAME_ROOT "0",
+	.id			= I2C_HW_IOP321,
+	.algo_data		= &algo_iop3xx_data0
+};
+static struct i2c_adapter iop3xx_ops1 = {
+	.owner			= THIS_MODULE,
+	.name			= ADAPTER_NAME_ROOT "1",
+	.id			= I2C_HW_IOP321,
+	.algo_data		= &algo_iop3xx_data1
+};
+
+static int __init i2c_iop3xx_init (void)
+{
+	return i2c_iop3xx_add_bus(&iop3xx_ops0) ||
+		i2c_iop3xx_add_bus(&iop3xx_ops1);
+}
+
+static void __exit i2c_iop3xx_exit (void)
+{
+	i2c_iop3xx_del_bus(&iop3xx_ops0);
+	i2c_iop3xx_del_bus(&iop3xx_ops1);
+}
+
+module_init (i2c_iop3xx_init);
+module_exit (i2c_iop3xx_exit);
+
+MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
+MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(i2c_debug,"i");
+
+MODULE_PARM_DESC(i2c_debug,
+        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
+
diff -Nru a/drivers/i2c/i2c-iop3xx.h b/drivers/i2c/i2c-iop3xx.h
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/i2c-iop3xx.h	Wed Jun 11 13:25:23 2003
@@ -0,0 +1,120 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c         */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP321_ICR_FAST_MODE  0x8000 /* 1=400kBps, 0=100kBps */
+#define IOP321_ICR_UNIT_RESET 0x4000 /* 1=RESET */
+#define IOP321_ICR_SADIE      0x2000 /* 1=Slave Detect Interrupt Enable */
+#define IOP321_ICR_ALDIE      0x1000 /* 1=Arb Loss Detect Interrupt Enable */
+#define IOP321_ICR_SSDIE      0x0800 /* 1=Slave STOP Detect Interrupt Enable */
+#define IOP321_ICR_BERRIE     0x0400 /* 1=Bus Error Interrupt Enable */
+#define IOP321_ICR_RXFULLIE   0x0200 /* 1=Receive Full Interrupt Enable */
+#define IOP321_ICR_TXEMPTYIE  0x0100 /* 1=Transmit Empty Interrupt Enable */
+#define IOP321_ICR_GCD        0x0080 /* 1=General Call Disable */
+/*
+ * IOP321_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP321_ICR_UE         0x0040 /* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems, 
+ * the user needs to ensure that the GPIO Output Data Register - 
+ * GPOD bits associated with an I2C port are cleared prior to setting 
+ * the enable bit for that I2C serial port. 
+ * The user prepares to enable I2C port 0 and 
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */                                     
+#define IOP321_ICR_SCLEN     0x0020 /* 1=SCL enable for master mode */
+#define IOP321_ICR_MABORT    0x0010 /* 1=Send a STOP with no data 
+                                     * NB TBYTE must be clear       */
+#define IOP321_ICR_TBYTE     0x0008 /* 1=Send/Receive a byte. i2c clears */
+#define IOP321_ICR_NACK      0x0004 /* 1=reply with NACK */
+#define IOP321_ICR_MSTOP     0x0002 /* 1=send a STOP after next data byte */
+#define IOP321_ICR_MSTART    0x0001 /* 1=initiate a START */
+
+
+#define IOP321_ISR_BERRD     0x0400 /* 1=BUS ERROR Detected */
+#define IOP321_ISR_SAD       0x0200 /* 1=Slave ADdress Detected */
+#define IOP321_ISR_GCAD      0x0100 /* 1=General Call Address Detected */
+#define IOP321_ISR_RXFULL    0x0080 /* 1=Receive Full */
+#define IOP321_ISR_TXEMPTY   0x0040 /* 1=Transmit Empty */
+#define IOP321_ISR_ALD       0x0020 /* 1=Arbitration Loss Detected */
+#define IOP321_ISR_SSD       0x0010 /* 1=Slave STOP Detected */
+#define IOP321_ISR_BBUSY     0x0008 /* 1=Bus BUSY */
+#define IOP321_ISR_UNITBUSY  0x0004 /* 1=Unit Busy */
+#define IOP321_ISR_NACK      0x0002 /* 1=Unit Rx or Tx a NACK */
+#define IOP321_ISR_RXREAD    0x0001 /* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP321_ISR_CLEARBITS 0x07f0
+
+#define IOP321_ISAR_SAMASK   0x007f 
+
+#define IOP321_IDBR_MASK     0x00ff
+
+#define IOP321_IBMR_SCL      0x0002
+#define IOP321_IBMR_SDA      0x0001
+
+#define IOP321_GPOD_I2C0     0x00c0  /* clear these bits to enable ch0 */
+#define IOP321_GPOD_I2C1     0x0030  /* clear these bits to enable ch1 */
+
+#define MYSAR                0x02     /* SWAG a suitable slave address */
+
+#define I2C_ERR              321
+#define I2C_ERR_BERR         (I2C_ERR+0)
+#define I2C_ERR_ALD          (I2C_ERR+1)
+
+
+typedef volatile u32* r32;
+
+struct iop3xx_biu {                /* Bus Interface Unit - the hardware */
+/* physical hardware defs - regs*/
+	r32 CR;
+	r32 SR;
+	r32 SAR;
+	r32 DBR;
+	r32 BMR;
+/* irq bit vector */
+	u32 irq;
+/* stored flags */
+	u32 SR_enabled, SR_received;
+};
+
+struct i2c_algo_iop3xx_data {
+	int channel;
+
+	wait_queue_head_t waitq;
+	spinlock_t lock;
+	int timeout;
+	struct iop3xx_biu* biu;
+};
+
+#define REGION_START( adap )  ((u32)((adap)->biu->CR))
+#define REGION_END( adap )    ((u32)((adap)->biu->BMR+1))
+#define REGION_LENGTH( adap ) (REGION_END(adap)-REGION_START(adap))
+
+#define IRQ_STATUS_MASK( adap ) (1<<adap->biu->irq)
+
+#endif /* I2C_IOP3XX_H */




More information about the lm-sensors mailing list