[PATCH 2.5.xx] - i2c-prosavage driver

henk henk at god.dyndns.org
Sat Jun 21 19:36:42 CEST 2003


Using the MMIO method now, the driver should be able to handle multiple
video cards.

The driver could potentialy also handle other s3 devices. You can try this
by adding more pci id's to the prosavage_pci_tbl.


Have fun,

henk

PS.
The i2c-prosavage dirver is also compatible with the lm_sensors2 CVS tree.
Greg is the coding style sufficient now for integration in the CVS trees?


-- 
-------------- next part --------------
diff -ruN linux-2.5.71/drivers/i2c/Kconfig linux-2.5.71-p1/drivers/i2c/Kconfig
--- linux-2.5.71/drivers/i2c/Kconfig	2003-06-14 21:18:01.000000000 +0200
+++ linux-2.5.71-p1/drivers/i2c/Kconfig	2003-06-16 02:01:49.000000000 +0200
@@ -42,6 +42,26 @@
 	  <file:Documentation/modules.txt>.
 	  The module will be called i2c-algo-bit.
 
+config I2C_PROSAVAGE
+	tristate "S3/VIA (Pro)Savage"
+	depends on I2C_ALGOBIT && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
+	  graphics processors.
+	  chipsets supported:
+	    S3/VIA KM266/VT8375 aka ProSavage8
+	    S3/VIA KM133/VT8365 aka Savage4
+
+	  This can also be built as a module which can be inserted and removed
+	  while the kernel is running.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+	  The module will be called i2c-prosavage.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at
+	  http://www.lm-sensors.nu
+
 config I2C_PHILIPSPAR
 	tristate "Philips style parallel port adapter"
 	depends on I2C_ALGOBIT && PARPORT
diff -ruN linux-2.5.71/drivers/i2c/Makefile linux-2.5.71-p1/drivers/i2c/Makefile
--- linux-2.5.71/drivers/i2c/Makefile	2003-06-14 21:17:56.000000000 +0200
+++ linux-2.5.71-p1/drivers/i2c/Makefile	2003-06-16 01:57:44.000000000 +0200
@@ -5,6 +5,7 @@
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
+obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_PHILIPSPAR)	+= i2c-philips-par.o
 obj-$(CONFIG_I2C_ELV)		+= i2c-elv.o
 obj-$(CONFIG_I2C_VELLEMAN)	+= i2c-velleman.o
diff -ruN linux-2.5.71/drivers/i2c/i2c-prosavage.c linux-2.5.71-p1/drivers/i2c/i2c-prosavage.c
--- linux-2.5.71/drivers/i2c/i2c-prosavage.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.5.71-p1/drivers/i2c/i2c-prosavage.c	2003-06-21 19:06:08.000000000 +0200
@@ -0,0 +1,362 @@
+/*
+ *    kernel/busses/i2c-prosavage.c
+ *
+ *    i2c bus driver for S3/VIA 8365/8375 graphics processor.
+ *    Copyright (c) 2003 Henk Vergonet <henk at god.dyndns.org>
+ *    Based on code written by:
+ *	Frodo Looijaard <frodol at dds.nl>,
+ *	Philip Edelbrock <phil at netroedge.com>,
+ *	Ralph Metzler <rjkm at thp.uni-koeln.de>, and
+ *	Mark D. Studebaker <mdsxyz123 at yahoo.com>
+ *	Simon Vogl
+ *	and others
+ *
+ *    Please read the lm_sensors documentation for details on use.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*  18-05-2003 HVE - created
+ *  14-06-2003 HVE - adapted for lm_sensors2
+ *  17-06-2003 HVE - linux 2.5.xx compatible
+ *  18-06-2003 HVE - codingstyle
+ *  21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx
+ *		     codingstyle, mmio enabled
+ *
+ *  This driver interfaces to the I2C bus of the VIA north bridge embedded
+ *  ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips.
+ *
+ *  Graphics cores:
+ *   S3/VIA KM266/VT8375 aka ProSavage8
+ *   S3/VIA KM133/VT8365 aka Savage4
+ *
+ *  Two serial busses are implemented:
+ *   SERIAL1 - I2C serial communications interface
+ *   SERIAL2 - DDC2 monitor communications interface
+ *
+ *  Tested on a FX41 mainboard, see http://www.shuttle.com
+ * 
+ *
+ *  TODO:
+ *  - integration with prosavage framebuffer device
+ *    (Additional documentation needed :(
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/io.h>
+
+
+/*
+ * driver configuration
+ */
+#define	DRIVER_ID	"i2c-prosavage"
+#define	DRIVER_VERSION	"20030621"
+
+/* lm_sensors2 / kernel 2.5.xx compatibility */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#define ADAPTER_NAME(x) (x).name
+#else
+#define ADAPTER_NAME(x) (x).dev.name
+#endif /* LINUX_VERSION_CODE */
+
+#define MAX_BUSSES	2
+
+struct s_i2c_bus {
+        u8	*mmvga;
+        int	i2c_reg;
+        int	adap_ok;
+        struct i2c_adapter              adap;
+        struct i2c_algo_bit_data        algo;
+};
+
+struct s_i2c_chip {
+	u8	*mmio;
+	struct s_i2c_bus	i2c_bus[MAX_BUSSES];
+};
+
+
+/*
+ * i2c configuration
+ */
+#ifndef I2C_HW_B_S3VIA
+#define I2C_HW_B_S3VIA	0x18	/* S3VIA ProSavage adapter		*/
+#endif
+
+/* delays */
+#define CYCLE_DELAY	10
+#define TIMEOUT		(HZ / 2)
+
+
+/* 
+ * S3/VIA 8365/8375 registers
+ */
+#ifndef PCI_VENDOR_ID_S3
+#define PCI_VENDOR_ID_S3		0x5333
+#endif
+#ifndef PCI_DEVICE_ID_S3_SAVAGE4
+#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
+#endif
+#ifndef PCI_DEVICE_ID_S3_PROSAVAGE8
+#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
+#endif
+
+#define VGA_CR_IX	0x3d4
+#define VGA_CR_DATA	0x3d5
+
+#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
+#define MM_SERIAL1	0xff20
+#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define I2C_ENAB	0x10
+#define I2C_SCL_OUT	0x01
+#define I2C_SDA_OUT	0x02
+#define I2C_SCL_IN	0x04
+#define I2C_SDA_IN	0x08
+
+#define SET_CR_IX(p, val)	*((p)->mmvga + VGA_CR_IX) = (u8)(val)
+#define SET_CR_DATA(p, val)	*((p)->mmvga + VGA_CR_DATA) = (u8)(val)
+#define GET_CR_DATA(p)		*((p)->mmvga + VGA_CR_DATA)
+
+
+/*
+ * Serial bus line handling
+ *
+ * serial communications register as parameter in private data
+ *
+ * TODO: locks with other code sections accessing video registers?
+ */
+static void bit_s3via_setscl(void *bus, int val)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+	unsigned int r;
+
+	SET_CR_IX(p, p->i2c_reg);
+	r = GET_CR_DATA(p);
+	r |= I2C_ENAB;
+	if (val) {
+		r |= I2C_SCL_OUT;
+	} else {
+		r &= ~I2C_SCL_OUT;
+	}
+	SET_CR_DATA(p, r);
+}
+
+static void bit_s3via_setsda(void *bus, int val)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+	unsigned int r;
+	
+	SET_CR_IX(p, p->i2c_reg);
+	r = GET_CR_DATA(p);
+	r |= I2C_ENAB;
+	if (val) {
+		r |= I2C_SDA_OUT;
+	} else {
+		r &= ~I2C_SDA_OUT;
+	}
+	SET_CR_DATA(p, r);
+}
+
+static int bit_s3via_getscl(void *bus)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+	SET_CR_IX(p, p->i2c_reg);
+	return (0 != (GET_CR_DATA(p) & I2C_SCL_IN));
+}
+
+static int bit_s3via_getsda(void *bus)
+{
+	struct s_i2c_bus *p = (struct s_i2c_bus *)bus;
+
+	SET_CR_IX(p, p->i2c_reg);
+	return (0 != (GET_CR_DATA(p) & I2C_SDA_IN));
+}
+
+
+/*
+ * adapter initialisation
+ */
+static int i2c_register_bus(struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg)
+{
+	int ret;
+	p->adap.owner	  = THIS_MODULE;
+	p->adap.id	  = I2C_HW_B_S3VIA;
+	p->adap.algo_data = &p->algo;
+	p->algo.setsda	  = bit_s3via_setsda;
+	p->algo.setscl	  = bit_s3via_setscl;
+	p->algo.getsda	  = bit_s3via_getsda;
+	p->algo.getscl	  = bit_s3via_getscl;
+	p->algo.udelay	  = CYCLE_DELAY;
+	p->algo.mdelay	  = CYCLE_DELAY;
+	p->algo.timeout	  = TIMEOUT;
+	p->algo.data	  = p;
+	p->mmvga	  = mmvga;
+	p->i2c_reg	  = i2c_reg;
+    
+	ret = i2c_bit_add_bus(&p->adap);
+	if (ret) {
+		return ret;
+	}
+
+	p->adap_ok = 1;
+	return 0;
+}
+
+
+/*
+ * Cleanup stuff
+ */
+static void __devexit prosavage_remove(struct pci_dev *dev)
+{
+	struct s_i2c_chip *chip;
+	int i, ret;
+
+	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+
+	if (!chip) {
+		return;
+	}
+	for (i = MAX_BUSSES - 1; i >= 0; i--) {
+		if (chip->i2c_bus[i].adap_ok == 0)
+			continue;
+
+		ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+	        if (ret) {
+			printk(DRIVER_ID ": %s not removed\n",
+				ADAPTER_NAME(chip->i2c_bus[i].adap));
+		}
+	}
+	if (chip->mmio) {
+		iounmap(chip->mmio);
+	}
+	kfree(chip);
+}
+
+
+/*
+ * Detect chip and initialize it
+ */
+static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int ret;
+	unsigned long base, len;
+	struct s_i2c_chip *chip;
+	struct s_i2c_bus  *bus;
+
+        pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); 
+	chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
+	if (chip == NULL) {
+		return -ENOMEM;
+	}
+
+	memset(chip, 0, sizeof(struct s_i2c_chip));
+
+	base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
+	len  = dev->resource[0].end - base + 1;
+	chip->mmio = ioremap_nocache(base, len);
+
+	if (chip->mmio == NULL) {
+		printk (DRIVER_ID ": ioremap failed\n");
+		prosavage_remove(dev);
+		return -ENODEV;
+	}
+
+
+	/*
+	 * Chip initialisation
+	 */
+	/* Unlock Extended IO Space ??? */
+
+
+	/*
+	 * i2c bus registration
+	 */
+	bus = &chip->i2c_bus[0];
+	snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
+		"ProSavage I2C bus at %02x:%02x.%x",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL1);
+	if (ret) {
+		goto err_adap;
+	}
+	/*
+	 * ddc bus registration
+	 */
+	bus = &chip->i2c_bus[1];
+	snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)),
+		"ProSavage DDC bus at %02x:%02x.%x",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL2);
+	if (ret) {
+		goto err_adap;
+	}
+	return 0;
+err_adap:
+	printk (DRIVER_ID ": %s failed\n", ADAPTER_NAME(bus->adap));
+	prosavage_remove(dev);
+	return ret;
+}
+
+
+/*
+ * Data for PCI driver interface
+ */
+static struct pci_device_id prosavage_pci_tbl[] __devinitdata = {
+   {
+	.vendor		=	PCI_VENDOR_ID_S3,
+	.device		=	PCI_DEVICE_ID_S3_SAVAGE4,
+	.subvendor	=	PCI_ANY_ID,
+	.subdevice	=	PCI_ANY_ID,
+   },{
+	.vendor		=	PCI_VENDOR_ID_S3,
+	.device		=	PCI_DEVICE_ID_S3_PROSAVAGE8,
+	.subvendor	=	PCI_ANY_ID,
+	.subdevice	=	PCI_ANY_ID,
+   },{ 0, }
+};
+
+static struct pci_driver prosavage_driver = {
+        .name           =	"prosavage-smbus",
+        .id_table       =	prosavage_pci_tbl,
+        .probe          =	prosavage_probe,
+        .remove         =	__devexit_p(prosavage_remove),
+};
+
+static int __init i2c_prosavage_init(void)
+{
+	printk(DRIVER_ID " version %s (%s)\n", I2C_VERSION, DRIVER_VERSION);
+	return pci_module_init(&prosavage_driver);
+}
+
+static void __exit i2c_prosavage_exit(void)
+{
+	pci_unregister_driver(&prosavage_driver);
+}
+
+MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl);
+MODULE_AUTHOR("Henk Vergonet");
+MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver");
+MODULE_LICENSE("GPL");
+
+module_init (i2c_prosavage_init);
+module_exit (i2c_prosavage_exit);


More information about the lm-sensors mailing list