Works now (Re: my user-space work ? (3d attempt))

[Danny Backx]

I'm sure I'm boring you by now. Sorry.

The names of the files in /sys were all different than what
chips.c said. This caused much of the mismatch. The hardcoded
file names are completely gone now. Voltage values start to
make sense :
dell: {227} prog/sensors/sensors
w83627hf-i2c-/sys/bus/i2c/devices/0-0290
Adapter: Dummy adapter
Algorithm: Dummy algorithm
in_input0:+14.40 V  (min = +12.16 V, max = +14.88 V)              
in_input1:+24.80 V  (min = +12.16 V, max = +14.88 V)              
in_input2:+33.44 V  (min = +29.76 V, max = +36.32 V)              
in_input3:+29.92 V  (min = +26.88 V, max = +32.64 V)              
in_input4:+31.52 V  (min = +28.48 V, max = +34.56 V)              
in_input5:+12.16 V  (min =  +3.36 V, max =  +7.84 V)              
in_input6:+15.04 V  (min =  +7.04 V, max = +10.24 V)              
in_input7:+32.80 V  (min = +26.88 V, max = +32.64 V)       ALARM  
in_input8:+32.96 V  (min = +27.04 V, max = +32.96 V)       ALARM  
fan_input1:
          1622 RPM  (min =  187 RPM, div = 32)                     
fan_input2:
          3013 RPM  (min =  187 RPM, div = 32)                     
fan_input3:
             0 RPM  (min =  375 RPM, div = 16)                     
temp_input1:
            +390°C  (limit =   +0°C, hysteresis =   +0°C) sensor =
thermistor           
temp_input2:
          +480.0°C  (limit =   +0°C, hysteresis =   +0°C) sensor =
PII/Celeron diode           
temp_input3:
          +2080.0°C  (limit =   +0°C, hysteresis =   +0°C) sensor =
thermistor           
vid:      +1.350 V
alarms:   
beep_enable:
          Sound alarm disabled

I'll leave it to you to figure out RPM and temperatures.

New patch included.

	Danny
-------------- next part --------------
A non-text attachment was scrubbed...
Name: diff-to-cvs.gz
Type: application/x-gzip
Size: 6921 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031011/794a8b4e/attachment.gz