pc87360 sensor-driver results
Immanuel Kant
TheOneAndOnlySM at hot.rr.com
Mon Apr 26 03:53:30 CEST 2004
lm_sensors2 cvs 04/25/04 @ 8:30 est
I haven't been able to notice any changes from yesterday's cvs, but I
probably don't know exactly what to look for.
I cat'ed around in my /proc/sys/dev/sensors/pc87366-isa-ecc0 area, and
the temperatures reported seem to be accurate farhenheit temperatures,
but I don't know if this is coincidence.
My bios only shows 1 temperature reading, and it says exactly: CPU
Temperature 46 C / 114.5 F (and the numbers keep rising).
Here are the outputs of the isadumps:
output of isadump 0x2e 0x2f 0x09 7
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: e9 15 bd a3 35 01 00 0a 00 00 0a 43 07 59 00 00
30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: ec c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 03 00 00 04 04 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: fc 07 07 00 00 00 00 00 00 00 00 00 00 00 00 00
output of isadump 0x2e 0x2f 0x0d 7
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 0d 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: e9 15 bd a3 35 01 00 0a 00 00 0a 43 07 59 00 00
30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: ec d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 03 00 00 04 04 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
output of isadump 0x2e 0x2f 0x0e 7
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 0e 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: e9 15 bd a3 35 01 00 0a 00 00 0a 43 07 59 00 00
30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: ec f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 03 00 00 04 04 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
output of isadump -f 0xecc0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 80 31 00 1a ff ff 00 10 00 00 00 00 00 00 3f 1b
10: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff 10 00 00 df 12 00 00 ff 00 1f 04 00 00 00 00
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: 00 ff 00 ff 00 ff a0 00 04 a0 00 26 ff 00 64 00
d0: 00 00 00 00 00 00 1f 05 02 0a 81 8c ff 00 00 00
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: 05 00 00 00 00 00 00 00 02 02 81 34 7f c9 7f 00
output of isadump -f 0xecd0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 80 31 00 1a ff ff 00 10 00 00 00 00 00 00 3f 1b
10: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff 10 00 00 df 12 00 00 ff 00 1f 04 00 00 00 00
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: 00 ff 00 ff 00 ff a0 00 04 a0 00 26 ff 00 64 00
d0: 00 00 00 00 00 00 1f 05 02 0a 81 8d ff 00 00 00
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: 05 00 00 00 00 00 00 00 02 02 81 34 7f c9 7f 00
output of isadump -f 0xecf0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 80 31 00 1a ff ff 00 10 00 00 00 00 00 00 3f 1b
10: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff 10 00 00 df 12 00 00 ff 00 1f 04 00 00 00 00
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: 00 ff 00 ff 00 ff a0 00 04 a0 00 26 ff 00 64 00
d0: 00 00 00 00 00 00 1f 05 02 0a 81 8c ff 00 00 00
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: 05 00 00 00 00 00 00 00 02 02 81 33 7f c9 7f 00
I used the echo command to set the fan divisors for fans 1 and 2 to 1 2.
I get more updates, and they are very close to what my bios reports:
CPU Fan Speed 3614RPM
System Fan Speed 2194RPM
I also tried echoing minimum values for these fans (3000 and 1500 for
fans 1 and 2) but nothing changed in sensors, but the proc entries for
fan1 and fan2 did get updated. I echoed a value of 3000 for fan2, but
only the proc fan2 file got updated, and no physical change (I was
guessing that if I upped the minimum value, i could increase the speed).
It might already be at a maxed out speed, so is there a way to test the
fans by decreasing the speed?
pwmconfig can still turn off the fans, but there are still overflow
messages in "sensors" and they don't go away (I left the computer idle
for about half an hour to see if there would be any change).
here is the full output of sensors:
pc87366-isa-ecc0
Adapter: ISA adapter
in0: +0.00 V (min = +0.00 V, max = 0.00 V)
in1: +1.26 V (min = +0.00 V, max = 2.97 V)
in2: +1.34 V (min = +0.00 V, max = 2.97 V)
in3: +0.00 V (min = +0.00 V, max = 0.00 V)
in4: +0.00 V (min = +0.00 V, max = 0.00 V)
in4: +0.00 V (min = +0.00 V, max = 0.00 V)
in5: +1.37 V (min = +0.00 V, max = 2.97 V)
in6: +1.41 V (min = +0.00 V, max = 2.97 V)
in7: +1.65 V (min = +0.00 V, max = 2.97 V)
in8: +0.00 V (min = +0.00 V, max = 0.00 V)
in9: +0.00 V (min = +0.00 V, max = 0.00 V)
in10: +1.64 V (min = +0.00 V, max = 2.97 V)
fan1: 3692 RPM (min = 0 RPM, div = 1)
fan2: 2162 RPM (min = 0 RPM, div = 2)
fan3: -1 RPM (min = 0 RPM, div = 8) OVERFLOW
temp1: +128 C (low = +201 C, high = -1 C)
temp1_crit:
+201 C
temp2: +128 C (low = +201 C, high = -1 C)
temp2_crit:
+201 C
temp3: -76 C (low = +201 C, high = -1 C)
temp3_crit:
+201 C
output of cat temp1
-1 201 201 128
temp1_status
131
temp2
-1 201 201 128
temp2_status
131
temp3
-1 201 201 -76
temp3_status
129
I am wondering where all this chip is measuring the temperature; my bios
reports only the cpu temp. Once again, I am not sure if these readings
above are correct (for farhenheit) or just a coincidental bug.
I am going to go and see if there is a bios update for my motherboard
(my bios is an AwardBios on an Asus board) so that I can see other
sensor readings.
If there is anything specific you guys would like me to do, I will
gladly see to it.
More information about the lm-sensors
mailing list