Intel S845WD1-E

[Philip Pokorny]

The sample config entry is in doc/chips/lm85...

:v)

Jean Delvare wrote:

>>I built all from source and it seems to work fine :)
>>    
>>
>
>Great :)
>
>  
>
>>lm85b-i2c-0-2e
>>Adapter: SMBus I801 adapter at efa0
>>in0:        +1.52 V  (min =  +0.00 V, max =  +3.32 V)
>>in1:        +1.50 V  (min =  +0.00 V, max =  +2.99 V)
>>in2:        +3.32 V  (min =  +0.00 V, max =  +4.38 V)
>>in3:       +5.21 V  (min =  +0.00 V, max =  +6.64 V)
>>in4:      +11.94 V  (min =  +0.00 V, max = +15.94 V)
>>fan1:      4825 RPM  (min =    0 RPM)
>>fan2:         0 RPM  (min =    0 RPM)
>>fan3:         0 RPM  (min =    0 RPM)
>>fan4:         0 RPM  (min =    0 RPM)
>>temp1:       +28 C  (low  =  -127 C, high =  +127 C)
>>temp2:       +23 C  (low  =  -127 C, high =  +127 C)
>>temp3:       +23 C  (low  =  -127 C, high =  +127 C)
>>pwm1:      255
>>pwm2:      255
>>pwm3:      255
>>vid:      +1.525 V    (VRM Version  9.1)
>>
>>Any idea where to find a translation of in0, in1, fan1,
>>pwm1 etc ?
>>    
>>
>
>I'm actually astonished that they are not in sensors.conf.eg. Philip,
>care to provide a sample configuration section for lm85 and clones?
>
>Wild guess:
>in0 == Vcore1
>in1 == Vcore2
>in2 == +3.3V
>in3 == +5V
>in4 == +12V
>fan1 == CPU Fan
>temp1 == CPU Temp
>temp2 & temp3 == Case Temp
>
>Just guessing however.
>
>  
>