[PATCH] i2c driver fixes for 2.6.4

Greg KH greg at kroah.com
Mon Mar 15 23:56:32 CET 2004


ChangeSet 1.1597.1.9, 2004/02/27 11:25:01-08:00, clemy at clemy.org

[PATCH] I2C: add w83627hf driver

The following patch against kernel 2.6.3 adds the w83627hf driver,
I have ported from the 2.4 version.

Jean Delvare has asked me to send this patch to you for applying.
I have tested it on w83627thf. Mark Hoffman has reviewed the code
and has also tested it on w83627thf.


 drivers/i2c/chips/Kconfig    |   11 
 drivers/i2c/chips/Makefile   |    1 
 drivers/i2c/chips/w83627hf.c | 1391 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1403 insertions(+)


diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
--- a/drivers/i2c/chips/Kconfig	Mon Mar 15 14:35:52 2004
+++ b/drivers/i2c/chips/Kconfig	Mon Mar 15 14:35:52 2004
@@ -182,4 +182,15 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83l785ts.
 
+config SENSORS_W83627HF
+	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for the Winbond W836X7 series
+	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83627hf.
+
 endmenu
diff -Nru a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
--- a/drivers/i2c/chips/Makefile	Mon Mar 15 14:35:52 2004
+++ b/drivers/i2c/chips/Makefile	Mon Mar 15 14:35:52 2004
@@ -4,6 +4,7 @@
 
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
+obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
diff -Nru a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/i2c/chips/w83627hf.c	Mon Mar 15 14:35:52 2004
@@ -0,0 +1,1391 @@
+/*
+    w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+    Copyright (c) 1998 - 2003  Frodo Looijaard <frodol at dds.nl>,
+    Philip Edelbrock <phil at netroedge.com>,
+    and Mark Studebaker <mdsxyz123 at yahoo.com>
+    Ported to 2.6 by Bernhard C. Schrenk <clemy at clemy.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    w83627hf	9	3	2	3	0x20	0x5ca3	no	yes(LPC)
+    w83627thf	7	3	3	3	0x90	0x5ca3	no	yes(LPC)
+    w83637hf	7	3	3	3	0x80	0x5ca3	no	yes(LPC)
+    w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
+
+    For other winbond chips, and for i2c support in the above chips,
+    use w83781d.c.
+
+    Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+    supported yet.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+static int force_addr;
+MODULE_PARM(force_addr, "i");
+MODULE_PARM_DESC(force_addr,
+		 "Initialize the base address of the sensors");
+static int force_i2c = 0x1f;
+MODULE_PARM(force_i2c, "i");
+MODULE_PARM_DESC(force_i2c,
+		 "Initialize the i2c address of the sensors");
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf);
+
+static int init = 1;
+MODULE_PARM(init, "i");
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* modified from kernel/include/traps.c */
+#define	REG	0x2e	/* The register to read/write */
+#define	DEV	0x07	/* Register: Logical device select */
+#define	VAL	0x2f	/* The value to read/write */
+
+/* logical device numbers for superio_select (below) */
+#define W83627HF_LD_FDC		0x00
+#define W83627HF_LD_PRT		0x01
+#define W83627HF_LD_UART1	0x02
+#define W83627HF_LD_UART2	0x03
+#define W83627HF_LD_KBC		0x05
+#define W83627HF_LD_CIR		0x06 /* w83627hf only */
+#define W83627HF_LD_GAME	0x07
+#define W83627HF_LD_MIDI	0x07
+#define W83627HF_LD_GPIO1	0x07
+#define W83627HF_LD_GPIO5	0x07 /* w83627thf only */
+#define W83627HF_LD_GPIO2	0x08
+#define W83627HF_LD_GPIO3	0x09
+#define W83627HF_LD_GPIO4	0x09 /* w83627thf only */
+#define W83627HF_LD_ACPI	0x0a
+#define W83627HF_LD_HWM		0x0b
+
+#define	DEVID	0x20	/* Register: Device ID */
+
+#define W83627THF_GPIO5_IOSR	0xf3 /* w83627thf only */
+#define W83627THF_GPIO5_DR	0xf4 /* w83627thf only */
+#define W83627THF_GPIO5_INVR	0xf5 /* w83627thf only */
+
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+	outb(DEV, REG);
+	outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+	outb(0x87, REG);
+	outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+	outb(0xAA, REG);
+}
+
+#define W627_DEVID 0x52
+#define W627THF_DEVID 0x82
+#define W697_DEVID 0x60
+#define W637_DEVID 0x70
+#define WINB_ACT_REG 0x30
+#define WINB_BASE_REG 0x60
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define WINB_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+					   (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+					   (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr)     ((nr < 7) ? (0x20 + (nr)) : \
+					   (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP(nr)		((nr == 3) ? (0x0250) : \
+					((nr == 2) ? (0x0150) : \
+					             (0x27)))
+#define W83781D_REG_TEMP_HYST(nr)	((nr == 3) ? (0x253) : \
+					((nr == 2) ? (0x153) : \
+					             (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr)	((nr == 3) ? (0x255) : \
+					((nr == 2) ? (0x155) : \
+					             (0x39)))
+
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+#define W83781D_REG_VBAT 0x5D
+
+#define W83627HF_REG_PWM1 0x5A
+#define W83627HF_REG_PWM2 0x5B
+#define W83627HF_REG_PWMCLK12 0x5C
+
+#define W83627THF_REG_PWM1		0x01	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM2		0x03	/* 697HF and 637HF too */
+#define W83627THF_REG_PWM3		0x11	/* 637HF too */
+
+#define W83627THF_REG_VRM_OVT_CFG 	0x18	/* 637HF too, unused yet */
+
+static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
+static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
+                             W83627THF_REG_PWM3 };
+#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
+                                     regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* Sensor selection */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/* Conversions. Limit checking is only done on the TO_REG
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+   Fixing this is just not worth it. */
+#define IN_TO_REG(val)  (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16 + 5)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+			     254);
+}
+
+#define TEMP_MIN (-128000)
+#define TEMP_MAX ( 127000)
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+   REG: 1C/bit, two's complement */
+static u8 TEMP_TO_REG(int temp)
+{
+        int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
+        ntemp += (ntemp<0 ? -500 : 500);
+        return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+        return (s8)reg * 1000;
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+
+#define BEEP_MASK_FROM_REG(val)		 (val)
+#define BEEP_MASK_TO_REG(val)		((val) & 0xffffff)
+#define BEEP_ENABLE_TO_REG(val)		((val)?1:0)
+#define BEEP_ENABLE_FROM_REG(val)	((val)?1:0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8 DIV_TO_REG(long val)
+{
+	int i;
+	val = SENSORS_LIMIT(val, 1, 128) >> 1;
+	for (i = 0; i < 6; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return ((u8) i);
+}
+
+/* For each registered chip, we need to keep some data in memory. That
+   data is pointed to by w83627hf_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new client is allocated. */
+struct w83627hf_data {
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	struct i2c_client *lm75;	/* for secondary I2C addresses */
+	/* pointer to array of 2 subclients */
+
+	u8 in[9];		/* Register value */
+	u8 in_max[9];		/* Register value */
+	u8 in_min[9];		/* Register value */
+	u8 fan[3];		/* Register value */
+	u8 fan_min[3];		/* Register value */
+	u8 temp;
+	u8 temp_max;		/* Register value */
+	u8 temp_hyst;		/* Register value */
+	u16 temp_add[2];	/* Register value */
+	u16 temp_max_add[2];	/* Register value */
+	u16 temp_hyst_add[2];	/* Register value */
+	u8 fan_div[3];		/* Register encoding, shifted right */
+	u8 vid;			/* Register encoding, combined */
+	u32 alarms;		/* Register encoding, combined */
+	u32 beep_mask;		/* Register encoding, combined */
+	u8 beep_enable;		/* Boolean */
+	u8 pwm[3];		/* Register value */
+	u8 pwmenable[3];	/* bool */
+	u16 sens[3];		/* 782D/783S only.
+				   1 = pentium diode; 2 = 3904 diode;
+				   3000-5000 = thermistor beta.
+				   Default = 3435.
+				   Other Betas unimplemented */
+	u8 vrm;
+};
+
+
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter);
+static int w83627hf_detect(struct i2c_adapter *adapter, int address,
+			  int kind);
+static int w83627hf_detach_client(struct i2c_client *client);
+
+static int w83627hf_read_value(struct i2c_client *client, u16 register);
+static int w83627hf_write_value(struct i2c_client *client, u16 register,
+			       u16 value);
+static void w83627hf_update_client(struct i2c_client *client);
+static void w83627hf_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83627hf_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "w83627hf",
+	.id		= I2C_DRIVERID_W83627HF,
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= w83627hf_attach_adapter,
+	.detach_client	= w83627hf_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	 \
+	w83627hf_update_client(client); \
+	 \
+	return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
+}
+show_in_reg(in)
+show_in_reg(in_min)
+show_in_reg(in_max)
+
+#define store_in_reg(REG, reg) \
+static ssize_t \
+store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
+			    data->in_##reg[nr]); \
+	 \
+	return count; \
+}
+store_in_reg(MIN, min)
+store_in_reg(MAX, max)
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, char *buf) \
+{ \
+        return show_in(dev, buf, 0x##offset); \
+} \
+static DEVICE_ATTR(in_input##offset, S_IRUGO, show_regs_in_##offset, NULL)
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_in_##reg (dev, buf, 0x##offset); \
+} \
+static ssize_t \
+store_regs_in_##reg##offset (struct device *dev, \
+			    const char *buf, size_t count) \
+{ \
+	return store_in_##reg (dev, buf, count, 0x##offset); \
+} \
+static DEVICE_ATTR(in_##reg##offset, S_IRUGO| S_IWUSR, \
+		  show_regs_in_##reg##offset, store_regs_in_##reg##offset)
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset) \
+sysfs_in_reg_offset(min, offset) \
+sysfs_in_reg_offset(max, offset)
+
+sysfs_in_offsets(0)
+sysfs_in_offsets(1)
+sysfs_in_offsets(2)
+sysfs_in_offsets(3)
+sysfs_in_offsets(4)
+sysfs_in_offsets(5)
+sysfs_in_offsets(6)
+sysfs_in_offsets(7)
+sysfs_in_offsets(8)
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in_input##offset); \
+device_create_file(&client->dev, &dev_attr_in_min##offset); \
+device_create_file(&client->dev, &dev_attr_in_max##offset); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	 \
+	w83627hf_update_client(client); \
+	 \
+	return sprintf(buf,"%ld\n", \
+		FAN_FROM_REG(data->reg[nr-1], \
+			    (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan)
+show_fan_reg(fan_min)
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->fan_min[nr - 1] =
+	    FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+	w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
+			    data->fan_min[nr - 1]);
+
+	return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan(dev, buf, 0x##offset); \
+} \
+static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_regs_fan_##offset, NULL)
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_min(dev, buf, 0x##offset); \
+} \
+static ssize_t \
+store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_fan_min(dev, buf, count, 0x##offset); \
+} \
+static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_min##offset, store_regs_fan_min##offset)
+
+sysfs_fan_offset(1)
+sysfs_fan_min_offset(1)
+sysfs_fan_offset(2)
+sysfs_fan_min_offset(2)
+sysfs_fan_offset(3)
+sysfs_fan_min_offset(3)
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan_input##offset); \
+device_create_file(&client->dev, &dev_attr_fan_min##offset); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	 \
+	w83627hf_update_client(client); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		return sprintf(buf,"%ld\n", \
+			(long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+	} else {	/* TEMP1 */ \
+		return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+	} \
+}
+show_temp_reg(temp)
+show_temp_reg(temp_max)
+show_temp_reg(temp_hyst)
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	u32 val; \
+	 \
+	val = simple_strtoul(buf, NULL, 10); \
+	 \
+	if (nr >= 2) {	/* TEMP2 and TEMP3 */ \
+		data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+				data->temp_##reg##_add[nr-2]); \
+	} else {	/* TEMP1 */ \
+		data->temp_##reg = TEMP_TO_REG(val); \
+		w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+			data->temp_##reg); \
+	} \
+	 \
+	return count; \
+}
+store_temp_reg(OVER, max)
+store_temp_reg(HYST, hyst)
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp(dev, buf, 0x##offset); \
+} \
+static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_regs_temp_##offset, NULL)
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \
+{ \
+	return show_temp_##reg (dev, buf, 0x##offset); \
+} \
+static ssize_t \
+store_regs_temp_##reg##offset (struct device *dev, \
+			      const char *buf, size_t count) \
+{ \
+	return store_temp_##reg (dev, buf, count, 0x##offset); \
+} \
+static DEVICE_ATTR(temp_##reg##offset, S_IRUGO| S_IWUSR, \
+		  show_regs_temp_##reg##offset, store_regs_temp_##reg##offset)
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset) \
+sysfs_temp_reg_offset(max, offset) \
+sysfs_temp_reg_offset(hyst, offset)
+
+sysfs_temp_offsets(1)
+sysfs_temp_offsets(2)
+sysfs_temp_offsets(3)
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp_input##offset); \
+device_create_file(&client->dev, &dev_attr_temp_max##offset); \
+device_create_file(&client->dev, &dev_attr_temp_hyst##offset); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL)
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_vid)
+
+static ssize_t
+show_vrm_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg)
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_alarms_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n", (long) data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL)
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms)
+
+#define show_beep_reg(REG, reg) \
+static ssize_t show_beep_##reg (struct device *dev, char *buf) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83627hf_data *data = i2c_get_clientdata(client); \
+	 \
+	w83627hf_update_client(client); \
+	 \
+	return sprintf(buf,"%ld\n", \
+		      (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
+}
+show_beep_reg(ENABLE, enable)
+show_beep_reg(MASK, mask)
+
+#define BEEP_ENABLE			0	/* Store beep_enable */
+#define BEEP_MASK			1	/* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+	       int update_mask)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, val2;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	if (update_mask == BEEP_MASK) {	/* We are storing beep_mask */
+		data->beep_mask = BEEP_MASK_TO_REG(val);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS1,
+				    data->beep_mask & 0xff);
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS3,
+				    ((data->beep_mask) >> 16) & 0xff);
+		val2 = (data->beep_mask >> 8) & 0x7f;
+	} else {		/* We are storing beep_enable */
+		val2 =
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+		data->beep_enable = BEEP_ENABLE_TO_REG(val);
+	}
+
+	w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
+			    val2 | data->beep_enable << 7);
+
+	return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \
+{ \
+	return show_beep_##reg(dev, buf); \
+} \
+static ssize_t \
+store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
+		  show_regs_beep_##reg, store_regs_beep_##reg)
+
+sysfs_beep(ENABLE, enable)
+sysfs_beep(MASK, mask)
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n",
+		       (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, old, old2, old3 = 0;
+
+	val = simple_strtoul(buf, NULL, 10);
+	old = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+	old3 = w83627hf_read_value(client, W83781D_REG_VBAT);
+	data->fan_div[nr - 1] = DIV_TO_REG(val);
+
+	if (nr >= 3 && data->type != w83697hf) {
+		old2 = w83627hf_read_value(client, W83781D_REG_PIN);
+		old2 = (old2 & 0x3f) | ((data->fan_div[2] & 0x03) << 6);
+		w83627hf_write_value(client, W83781D_REG_PIN, old2);
+		old3 = (old3 & 0x7f) | ((data->fan_div[2] & 0x04) << 5);
+	}
+	if (nr >= 2) {
+		old = (old & 0x3f) | ((data->fan_div[1] & 0x03) << 6);
+		old3 = (old3 & 0xbf) | ((data->fan_div[1] & 0x04) << 4);
+	}
+	if (nr >= 1) {
+		old = (old & 0xcf) | ((data->fan_div[0] & 0x03) << 4);
+		w83627hf_write_value(client, W83781D_REG_VID_FANDIV, old);
+		old3 = (old3 & 0xdf) | ((data->fan_div[0] & 0x04) << 3);
+		w83627hf_write_value(client, W83781D_REG_VBAT, old3);
+	}
+
+	return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \
+{ \
+	return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_fan_div_##offset (struct device *dev, \
+			    const char *buf, size_t count) \
+{ \
+	return store_fan_div_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_fan_div_##offset, store_regs_fan_div_##offset)
+
+sysfs_fan_div(1)
+sysfs_fan_div(2)
+sysfs_fan_div(3)
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan_div##offset); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	if (data->type == w83627thf) {
+		/* bits 0-3 are reserved  in 627THF */
+		data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1] |
+				     (w83627hf_read_value(client,
+				     W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
+	} else {
+		data->pwm[nr - 1] = PWM_TO_REG(val);
+		w83627hf_write_value(client,
+				     W836X7HF_REG_PWM(data->type, nr),
+				     data->pwm[nr - 1]);
+	}
+
+	return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \
+{ \
+	return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_pwm_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+	return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_pwm_##offset, store_regs_pwm_##offset)
+
+sysfs_pwm(1)
+sysfs_pwm(2)
+sysfs_pwm(3)
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+
+	w83627hf_update_client(client);
+
+	return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	u32 val, tmp;
+
+	val = simple_strtoul(buf, NULL, 10);
+
+	switch (val) {
+	case 1:		/* PII/Celeron diode */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp | BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case 2:		/* 3904 */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp | BIT_SCFG1[nr - 1]);
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG2);
+		w83627hf_write_value(client, W83781D_REG_SCFG2,
+				    tmp & ~BIT_SCFG2[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	case W83781D_DEFAULT_BETA:	/* thermistor */
+		tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+		w83627hf_write_value(client, W83781D_REG_SCFG1,
+				    tmp & ~BIT_SCFG1[nr - 1]);
+		data->sens[nr - 1] = val;
+		break;
+	default:
+		dev_err(&client->dev,
+		       "Invalid sensor type %ld; must be 1, 2, or %d\n",
+		       (long) val, W83781D_DEFAULT_BETA);
+		break;
+	}
+
+	return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \
+{ \
+    return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t \
+store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+    return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(sensor##offset, S_IRUGO | S_IWUSR, \
+		  show_regs_sensor_##offset, store_regs_sensor_##offset)
+
+sysfs_sensor(1)
+sysfs_sensor(2)
+sysfs_sensor(3)
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_sensor##offset); \
+} while (0)
+
+
+/* This function is called when:
+     * w83627hf_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83627hf_driver is still present) */
+static int w83627hf_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, w83627hf_detect);
+}
+
+static int w83627hf_find(int *address)
+{
+	u16 val;
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val != W627_DEVID &&
+	   val != W627THF_DEVID &&
+	   val != W697_DEVID &&
+	   val != W637_DEVID) {
+		superio_exit();
+		return -ENODEV;
+	}
+
+	superio_select(W83627HF_LD_HWM);
+	val = (superio_inb(WINB_BASE_REG) << 8) |
+	       superio_inb(WINB_BASE_REG + 1);
+	*address = val & ~(WINB_EXTENT - 1);
+	if (*address == 0 && force_addr == 0) {
+		superio_exit();
+		return -ENODEV;
+	}
+	if (force_addr)
+		*address = force_addr;	/* so detect will get called */
+
+	superio_exit();
+	return 0;
+}
+
+int w83627hf_detect(struct i2c_adapter *adapter, int address,
+		   int kind)
+{
+	int val;
+	struct i2c_client *new_client;
+	struct w83627hf_data *data;
+	int err = 0;
+	const char *client_name = "";
+
+	if (!i2c_is_isa_adapter(adapter)) {
+		err = -ENODEV;
+		goto ERROR0;
+	}
+
+	if(force_addr)
+		address = force_addr & ~(WINB_EXTENT - 1);
+
+	if (!request_region(address, WINB_EXTENT, "w83627hf")) {
+		err = -EBUSY;
+		goto ERROR0;
+	}
+
+	if(force_addr) {
+		printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
+		superio_enter();
+		superio_select(W83627HF_LD_HWM);
+		superio_outb(WINB_BASE_REG, address >> 8);
+		superio_outb(WINB_BASE_REG+1, address & 0xff);
+		superio_exit();
+	}
+
+	superio_enter();
+	val= superio_inb(DEVID);
+	if(val == W627_DEVID)
+		kind = w83627hf;
+	else if(val == W697_DEVID)
+		kind = w83697hf;
+	else if(val == W627THF_DEVID)
+		kind = w83627thf;
+	else if(val == W637_DEVID)
+		kind = w83637hf;
+
+	superio_select(W83627HF_LD_HWM);
+	if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
+		superio_outb(WINB_ACT_REG, 1);
+	superio_exit();
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83627hf_{read,write}_value. */
+
+	if (!(new_client = kmalloc(sizeof(struct i2c_client) +
+				   sizeof(struct w83627hf_data),
+				   GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+
+	memset(new_client, 0x00, sizeof (struct i2c_client) +
+	       sizeof (struct w83627hf_data));
+
+	data = (struct w83627hf_data *) (new_client + 1);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	init_MUTEX(&data->lock);
+	new_client->adapter = adapter;
+	new_client->driver = &w83627hf_driver;
+	new_client->flags = 0;
+
+
+	if (kind == w83627hf) {
+		client_name = "w83627hf";
+	} else if (kind == w83627thf) {
+		client_name = "w83627thf";
+	} else if (kind == w83697hf) {
+		client_name = "w83697hf";
+	} else if (kind == w83637hf) {
+		client_name = "w83637hf";
+	} else {
+		dev_err(&new_client->dev, "Internal error: unknown "
+						"kind (%d)?!?", kind);
+		err = -ENODEV;
+		goto ERROR2;
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR2;
+
+	data->lm75 = NULL;
+
+	/* Initialize the chip */
+	w83627hf_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file_in(new_client, 0);
+	if (kind != w83697hf)
+		device_create_file_in(new_client, 1);
+	device_create_file_in(new_client, 2);
+	device_create_file_in(new_client, 3);
+	device_create_file_in(new_client, 4);
+	if (kind != w83627thf && kind != w83637hf) {
+		device_create_file_in(new_client, 5);
+		device_create_file_in(new_client, 6);
+	}
+	device_create_file_in(new_client, 7);
+	device_create_file_in(new_client, 8);
+
+	device_create_file_fan(new_client, 1);
+	device_create_file_fan(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan(new_client, 3);
+
+	device_create_file_temp(new_client, 1);
+	device_create_file_temp(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_temp(new_client, 3);
+
+	if (kind != w83697hf)
+		device_create_file_vid(new_client);
+
+	if (kind != w83697hf)
+		device_create_file_vrm(new_client);
+
+	device_create_file_fan_div(new_client, 1);
+	device_create_file_fan_div(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_fan_div(new_client, 3);
+
+	device_create_file_alarms(new_client);
+
+	device_create_file_beep(new_client);
+
+	device_create_file_pwm(new_client, 1);
+	device_create_file_pwm(new_client, 2);
+	if (kind == w83627thf || kind == w83637hf)
+		device_create_file_pwm(new_client, 3);
+
+	device_create_file_sensor(new_client, 1);
+	device_create_file_sensor(new_client, 2);
+	if (kind != w83697hf)
+		device_create_file_sensor(new_client, 3);
+
+	return 0;
+
+      ERROR2:
+	kfree(new_client);
+      ERROR1:
+	release_region(address, WINB_EXTENT);
+      ERROR0:
+	return err;
+}
+
+static int w83627hf_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev,
+		       "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+
+	release_region(client->addr, WINB_EXTENT);
+	kfree(client);
+
+	return 0;
+}
+
+
+/*
+   ISA access must always be locked explicitly!
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary.
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int w83627hf_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int res, word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x50)
+		   || ((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+	if (word_sized) {
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		res =
+		    (res << 8) + inb_p(client->addr +
+				       W83781D_DATA_REG_OFFSET);
+	}
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return res;
+}
+
+static int w83627thf_read_gpio5(struct i2c_client *client)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int res, inv;
+
+	down(&data->lock);
+	superio_enter();
+	superio_select(W83627HF_LD_GPIO5);
+	res = superio_inb(W83627THF_GPIO5_DR);
+	inv = superio_inb(W83627THF_GPIO5_INVR);
+	superio_exit();
+	up(&data->lock);
+	return res;
+}
+
+static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int word_sized;
+
+	down(&data->lock);
+	word_sized = (((reg & 0xff00) == 0x100)
+		   || ((reg & 0xff00) == 0x200))
+		  && (((reg & 0x00ff) == 0x53)
+		   || ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+	if (word_sized) {
+		outb_p(value >> 8,
+		       client->addr + W83781D_DATA_REG_OFFSET);
+		outb_p((reg & 0xff) + 1,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+	}
+	outb_p(value & 0xff,
+	       client->addr + W83781D_DATA_REG_OFFSET);
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       client->addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+	}
+	up(&data->lock);
+	return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void w83627hf_init_client(struct i2c_client *client)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int vid = 0, i;
+	int type = data->type;
+	u8 tmp;
+
+	if(init) {
+		/* save this register */
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG);
+		/* Reset all except Watchdog values and last conversion values
+		   This sets fan-divs to 2, among others */
+		w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80);
+		/* Restore the register and disable power-on abnormal beep.
+		   This saves FAN 1/2/3 input/output values set by BIOS. */
+		w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+		/* Disable master beep-enable (reset turns it on).
+		   Individual beeps should be reset to off but for some reason
+		   disabling this bit helps some people not get beeped */
+		w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+	}
+
+	/* Minimize conflicts with other winbond i2c-only clients...  */
+	/* disable i2c subclients... how to disable main i2c client?? */
+	/* force i2c address to relatively uncommon address */
+	w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89);
+	w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
+
+	/* Read VID only once */
+	if (w83627hf == data->type || w83637hf == data->type) {
+		int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
+		data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
+	} else if (w83627thf == data->type) {
+		data->vid = w83627thf_read_gpio5(client) & 0x1f;
+	}
+
+	/* Convert VID to voltage based on default VRM */
+	data->vrm = DEFAULT_VRM;
+	if (type != w83697hf)
+		vid = vid_from_reg(vid, data->vrm);
+
+	tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
+	for (i = 1; i <= 3; i++) {
+		if (!(tmp & BIT_SCFG1[i - 1])) {
+			data->sens[i - 1] = W83781D_DEFAULT_BETA;
+		} else {
+			if (w83627hf_read_value
+			    (client,
+			     W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+				data->sens[i - 1] = 1;
+			else
+				data->sens[i - 1] = 2;
+		}
+		if ((type == w83697hf) && (i == 2))
+			break;
+	}
+
+	data->pwmenable[0] = 1;
+	data->pwmenable[1] = 1;
+	data->pwmenable[2] = 1;
+
+	if(init) {
+		if (type == w83627hf) {
+			/* enable PWM2 control (can't hurt since PWM reg
+		           should have been reset to 0xff) */
+			w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
+					    0x19);
+		}
+		/* enable comparator mode for temp2 and temp3 so
+	           alarm indication will work correctly */
+		i = w83627hf_read_value(client, W83781D_REG_IRQ);
+		if (!(i & 0x40))
+			w83627hf_write_value(client, W83781D_REG_IRQ,
+					    i | 0x40);
+	}
+
+	/* Start monitoring */
+	w83627hf_write_value(client, W83781D_REG_CONFIG,
+			    (w83627hf_read_value(client,
+						W83781D_REG_CONFIG) & 0xf7)
+			    | 0x01);
+}
+
+static void w83627hf_update_client(struct i2c_client *client)
+{
+	struct w83627hf_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > HZ + HZ / 2) ||
+	    (jiffies < data->last_updated) || !data->valid) {
+		for (i = 0; i <= 8; i++) {
+			/* skip missing sensors */
+			if (((data->type == w83697hf) && (i == 1)) ||
+			    ((data->type == w83627thf || data->type == w83637hf)
+			    && (i == 4 || i == 5)))
+				continue;
+			data->in[i] =
+			    w83627hf_read_value(client, W83781D_REG_IN(i));
+			data->in_min[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MIN(i));
+			data->in_max[i] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_IN_MAX(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			data->fan[i - 1] =
+			    w83627hf_read_value(client, W83781D_REG_FAN(i));
+			data->fan_min[i - 1] =
+			    w83627hf_read_value(client,
+					       W83781D_REG_FAN_MIN(i));
+		}
+		for (i = 1; i <= 3; i++) {
+			u8 tmp = w83627hf_read_value(client,
+				W836X7HF_REG_PWM(data->type, i));
+ 			/* bits 0-3 are reserved  in 627THF */
+ 			if (data->type == w83627thf)
+				tmp &= 0xf0;
+			data->pwm[i - 1] = tmp;
+			if(i == 2 &&
+			   (data->type == w83627hf || data->type == w83697hf))
+				break;
+		}
+
+		data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1));
+		data->temp_max =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_hyst =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1));
+		data->temp_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP(2));
+		data->temp_max_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2));
+		data->temp_hyst_add[0] =
+		    w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2));
+		if (data->type != w83697hf) {
+			data->temp_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP(3));
+			data->temp_max_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3));
+			data->temp_hyst_add[1] =
+			  w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3));
+		}
+
+		i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
+		data->fan_div[0] = (i >> 4) & 0x03;
+		data->fan_div[1] = (i >> 6) & 0x03;
+		if (data->type != w83697hf) {
+			data->fan_div[2] = (w83627hf_read_value(client,
+					       W83781D_REG_PIN) >> 6) & 0x03;
+		}
+		i = w83627hf_read_value(client, W83781D_REG_VBAT);
+		data->fan_div[0] |= (i >> 3) & 0x04;
+		data->fan_div[1] |= (i >> 4) & 0x04;
+		if (data->type != w83697hf)
+			data->fan_div[2] |= (i >> 5) & 0x04;
+		data->alarms =
+		    w83627hf_read_value(client, W83781D_REG_ALARM1) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) |
+		    (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16);
+		i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2);
+		data->beep_enable = i >> 7;
+		data->beep_mask = ((i & 0x7f) << 8) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) |
+		    w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16;
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+}
+
+static int __init sensors_w83627hf_init(void)
+{
+	int addr;
+
+	if (w83627hf_find(&addr)) {
+		return -ENODEV;
+	}
+	normal_isa[0] = addr;
+
+	return i2c_add_driver(&w83627hf_driver);
+}
+
+static void __exit sensors_w83627hf_exit(void)
+{
+	i2c_del_driver(&w83627hf_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol at dds.nl>, "
+	      "Philip Edelbrock <phil at netroedge.com>, "
+	      "and Mark Studebaker <mdsxyz123 at yahoo.com>");
+MODULE_DESCRIPTION("W83627HF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627hf_init);
+module_exit(sensors_w83627hf_exit);




More information about the lm-sensors mailing list