No sensors found!

[Mark Studebaker]

That's your problem then.
Perhaps Redhat 9 includes the module but it is lost :);
perhaps it includes it but it wasn't built by default, and you'll have to build it;
perhaps it doesn't include it and you'll need to install our package from our website.
If you don't know how to do this it will be a good learning experience :)
good luck
mds




Jennifer Villar wrote:
> I get the following error even though I believe I ran it before without
> error. 
> 
> modprobe: Can't locate module w83627hf
> 
> Attached is the dmesg file. I didn't see anything in it that refers the
> the w83627hf module. 
> 
> When I said I am new to Linux I mean several days new so if I miss
> something I wouldn't be surprised.
> 
> 
> Thanks for your speedy response.
> 
> -Jenn
> 
> -----Original Message-----
> From: Mark Studebaker [mailto:mds4 at verizon.net] 
> Sent: Friday, March 26, 2004 5:07 PM
> To: Jennifer Villar
> Cc: sensors at Stimpy.netroedge.com
> Subject: Re: No sensors found!
> 
> you don't show w83627hf loaded.
> modprobe it again to be sure then check dmesg for clues.
> 
> Jennifer Villar wrote:
> 
>>   -->
>>
>>I am a complete newbie here cutting my teeth on RedHat 9 Kernel 
>>2.4.20-8smp. I am trying to get lm_sensors to work but I continually
> 
> get 
> 
>>the "No Sensors found!" error. I have followed the instructions that 
>>sensors-detect has provided (except the /etc/rc* entries as I am not 
>>sure which file to put the entries into, any?).
>>
>> 
>>
>>I am using a Supermicro server with an Intel 857 chipset and the Super
> 
> 
>>P4SCA motherboard. Unfortunately I cannot look at the mother board as 
>>the system is racked.
>>
>> 
>>
>>Here is some of the information I have that may shed light to someone 
>>who knows a thing or two about this stuff.
>>
>> 
>>
>># Results from lsmod
>>
>> 
>>
>>Module                  Size  Used by    Not tainted
>>
>>i2c-isa                 1868   0  (unused)
>>
>>i2c-dev                 5636   0
>>
>>i2c-philips-par         3360   0  (unused)
>>
>>parport                39072   0  [i2c-philips-par]
>>
>>i2c-elv                 2408   0
>>
>>i2c-algo-bit            8872   1  [i2c-philips-par i2c-elv]
>>
>>i2c-proc                9232   0
>>
>>i2c-core               19908   0  [i2c-isa i2c-dev i2c-algo-bit
> 
> i2c-proc]
> 
>>autofs                 13684   0  (autoclean) (unused)
>>
>>e1000                  70400   1
>>
>>ipt_REJECT              3928   0  (autoclean)
>>
>>iptable_filter          2412   0  (autoclean)
>>
>>ip_tables              15864   2  [ipt_REJECT iptable_filter]
>>
>>keybdev                 2976   0  (unused)
>>
>>mousedev                5656   0  (unused)
>>
>>hid                    22308   0  (unused)
>>
>>input                   6208   0  [keybdev mousedev hid]
>>
>>usb-uhci               27404   0  (unused)
>>
>>ehci-hcd               20456   0  (unused)
>>
>>usbcore                82592   1  [hid usb-uhci ehci-hcd]
>>
>>ext3                   73376   2
>>
>>jbd                    56336   2  [ext3]
>>
>> 
>>
>># Output of sensors-detect
>>
>> Detects correctly:
>>
>>  * ISA bus address 0x0290 (Busdriver `i2c-isa')
>>
>>    Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)
>>
>> 
>>
>> 
>>
>> I will now generate the commands needed to load the I2C modules.
>>
>> Sometimes, a chip is available both through the ISA bus and an I2C
> 
> bus.
> 
>> ISA bus access is faster, but you need to load an additional driver
> 
> module
> 
>> for it. If you have the choice, do you want to use the ISA bus or the
>>
>> I2C/SMBus (ISA/smbus)? Driver `w83627hf' (should be inserted):
>>
>>  Detects correctly:
>>
>>  * ISA bus address 0x0290 (Busdriver `i2c-isa')
>>
>>    Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)
>>
>> 
>>
>>To make the sensors modules behave correctly, add these lines to
>>
>>/etc/modules.conf:
>>
>> 
>>
>>#----cut here----
>>
>># I2C module options
>>
>>alias char-major-89 i2c-dev
>>
>>#----cut here----
>>
>> 
>>
>>To load everything that is needed, add this to some /etc/rc* file:
>>
>> 
>>
>>#----cut here----
>>
>># I2C adapter drivers
>>
>>modprobe i2c-isa
>>
>># I2C chip drivers
>>
>>modprobe w83627hf
>>
>># sleep 2 # optional
>>
>>/usr/bin/sensors -s # recommended
>>
>>#----cut here----
>>
>> 
>>
>>Any information would be greatly appreciated.
>>
>> 
>>
>>-Jennifer
> 
> 
>