[PATCH] I2C: Do not show disabled pc87360 fans

[Greg KH]

ChangeSet 1.2046, 2005/02/03 00:30:49-08:00, khali at linux-fr.org

[PATCH] I2C: Do not show disabled pc87360 fans

The pc87360 driver create sysfs files even for disabled fans. Since data
won't ever be updated, it doesn't make much sense. The following patch
adds some tests to only create the interface files that are actually
needed.

Signed-off-by: Jean Delvare <khali at linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg at kroah.com>


 drivers/i2c/chips/pc87360.c |   49 +++++++++++++++++++++++++++++++-------------
 1 files changed, 35 insertions(+), 14 deletions(-)


diff -Nru a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c
--- a/drivers/i2c/chips/pc87360.c	2005-02-03 09:34:48 -08:00
+++ b/drivers/i2c/chips/pc87360.c	2005-02-03 09:34:48 -08:00
@@ -795,8 +795,10 @@
 
 	/* Fan clock dividers may be needed before any data is read */
 	for (i = 0; i < data->fannr; i++) {
-		data->fan_status[i] = pc87360_read_value(data, LD_FAN,
-				      NO_BANK, PC87360_REG_FAN_STATUS(i));
+		if (FAN_CONFIG_MONITOR(data->fan_conf, i))
+			data->fan_status[i] = pc87360_read_value(data,
+					      LD_FAN, NO_BANK,
+					      PC87360_REG_FAN_STATUS(i));
 	}
 
 	if (init > 0) {
@@ -898,14 +900,27 @@
 	}
 
 	if (data->fannr) {
-		device_create_file(&new_client->dev, &dev_attr_fan1_input);
-		device_create_file(&new_client->dev, &dev_attr_fan2_input);
-		device_create_file(&new_client->dev, &dev_attr_fan1_min);
-		device_create_file(&new_client->dev, &dev_attr_fan2_min);
-		device_create_file(&new_client->dev, &dev_attr_fan1_div);
-		device_create_file(&new_client->dev, &dev_attr_fan2_div);
-		device_create_file(&new_client->dev, &dev_attr_fan1_status);
-		device_create_file(&new_client->dev, &dev_attr_fan2_status);
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan1_status);
+		}
+
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan2_status);
+		}
 
 		if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
 			device_create_file(&new_client->dev, &dev_attr_pwm1);
@@ -913,10 +928,16 @@
 			device_create_file(&new_client->dev, &dev_attr_pwm2);
 	}
 	if (data->fannr == 3) {
-		device_create_file(&new_client->dev, &dev_attr_fan3_input);
-		device_create_file(&new_client->dev, &dev_attr_fan3_min);
-		device_create_file(&new_client->dev, &dev_attr_fan3_div);
-		device_create_file(&new_client->dev, &dev_attr_fan3_status);
+		if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_input);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_min);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_div);
+			device_create_file(&new_client->dev,
+					   &dev_attr_fan3_status);
+		}
 
 		if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
 			device_create_file(&new_client->dev, &dev_attr_pwm3);