Winbond W83792D driver for linux-2.4 (patch to lm_sensors-2.9.0)

Huang0 at Winbond.com.tw Huang0 at Winbond.com.tw
Fri Feb 25 07:19:02 CET 2005


Hi Jean

> Don't include changes to README, CONTRIBUTORS and CHANGES. These files change > often and we probably couldn't apply the patch to CVS directly, so we will be > easier editing the files ourselves. You are invited to remind us to edit them > though.

I did not change the above documents, you may change it when you are free.

> A doc/chips/w83792d file would be very welcome but isn't mandatory. It can be > added later.
I did not add doc/chips/w83792d into the patch we sent you, because it is
still under modification. I will send it to you in the near future. Besides
this document, I will send you another document: doc/developers/proc
I need add some 792 interfaces into it, which are all about Winbond
SmartFan(SmartFan I and SmartFan II).


Thanks
Best Regards
Chunhao


> -----Original Message-----
> From: PI14 HUANG0
> Sent: 2005Äê2ÔÂ25ÈÕ 14:05
> To: 'khali at linux-fr.org'; 'mds4 at verizon.net'
> Cc: 'sensors at Stimpy.netroedge.com'; PI10 LHHsu; PI13 CFLi; PI14 DZSHEN
> Subject: RE: Winbond W83792D driver for linux-2.4 (patch to lm_sensors-2.9.0)
> 
> Hi Jean, MDS
> 
> If you have any questions about 792 driver, please tell us.
> I'd like to add some comments to this 792 driver:
> (1) This driver is only for 2.4 kernel(2.4.10 or later), 2.6 kernel
> need a different driver.
> (2) This driver is only for Winbond W83792D C version device, there
> are also some motherboards with B version W83792D device. The
> calculation method to in6-in7(measured value, limits) is a little
> different between C and B version. C or B version can be identified
> by CR[0x49h].
> 
> Some other comments and notes were added into w83792d.c by me,
> You may refer them.
> 
> Thanks
> Best Regards
> 
> Chunhao
> 2005-02-25
> 
> 
> > -----Original Message-----
> > From: PI14 DZSHEN
> > Sent: 2005Äê2ÔÂ25ÈÕ 13:45
> > To: 'khali at linux-fr.org'; 'mds4 at verizon.net'
> > Cc: 'sensors at Stimpy.netroedge.com'; PI14 HUANG0; PI10 LHHsu
> > Subject: FW: Winbond W83792D driver for linux-2.4 (patch to lm_sensors-2.9.0)
> >
> > Dear all:
> >   According to lhhsu at winbond.com.tw instruction, I am forwarding this patch
> > to all of you.
> >
> > Many thanks
> >
> > techeng

===========================================================================================The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original author of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such person, please kindly reply the sender indicating accordingly and delete all copies of it from your computer and network server immediately. We thank you for your cooperation. It is advisable that any unauthorized use of confidential information of Winbond is strictly prohibited; and any information in this email that does not relate to the official business of Winbond shall be deemed as neither given nor endorsed by Winbond.===========================================================================================If your computer is unable to decode Chinese font, please ignore the following message. They essentially repea!
 t the  English statement above.¥»«H¥ó¤º©Ò§tµØ¨¹¹q¤lªº°]²£©Ê¾÷±K©Ê¸ê°T, ¶È±ÂÅv­ìµo«H¤H«ü©w¤§¦¬«H¤H¨ú¾\¤§¥Î. °²¨Ï±z¨Ã«D³Q«ü©w¤§¦¬«H¤H©Î¦]¥ô¦ó­ì¦]¦b¥¼¸g±ÂÅvªº±¡§Î¤§¤U¦¬¨ì¥»«H¥ó, ½Ð±z§iª¾­ìµo«H¤H¨Ã¥ß§Y±N«H¥ó±q¹q¸£»Pºô¸ô¦øªA¾¹¤¤¤©¥H®ø°£. ¹ï©ó±zªº¦X§@, §Ú­Ì¥ý¦¹­PÁÂ. ¯S¦¹´£¿ô, ¥ô¦ó¥¼¸g±ÂÅv¾Õ¦Û¨Ï¥ÎµØ¨¹¹q¤lªº¾÷±K¸ê°Tªº¦æ¬°¬O³QÄY®æ¸T¤îªº. «H¥ó»PµØ¨¹¹q¤lÀç·~µLÃö¤§¤º®e,¤£±oµø¬°µØ¨¹¹q¤l¤§¥ß³õ©Î·N¨£.



More information about the lm-sensors mailing list