[lm-sensors] Unsupported mBMC on Intel SE7320SP2

[Jeff Bloom]

Try the following link below where you need the kernel patch for ipmi_smb_intf driver
http://sourceforge.net/projects/openipmi/
Follow the link above for the 2.4 or 2.6 kernel.

Also you need the i801 driver to be loaded.

I hope this helps as this worked for me on a SE7320VP2 platform.

-JB


-----Original Message-----
From: Schäfer Raumgestaltung [mailto:ulrich at schaefer-raumgestaltung.de] 
Sent: Tuesday, July 05, 2005 2:47 PM
To: lm-sensors at lm-sensors.org
Subject: [lm-sensors] Unsupported mBMC on Intel SE7320SP2


Chips on this Board:
   
Super-I/O National (now Winbond) PC 87427
mBMC     National                        PC 87431

No Info available as i read in Section 'newdrivers' 

I found some 'Documentation' on INTEL Support CD (see partial Cut below)

if useful, please E-Mail  for further Data.......

hth

Uli


//****************************************************************************


//
// File Header Information
//

_LF_NAME       'SE7320SP2/SE7525GP2 SDR File'
_LF_VERSION    '1.10'
_LF_FMT_VER    '1.50'
_IPMI_VERSION  '1.50'

//
// SDR Header Information
//

_SDR (
_START_ADDR    0000
_DATA_LEN      0000
_NVS_TYPE      'IMBDEVICE'
_DEV_BUS       FF
_DEV_ADDRESS   20


// ================================================================

######################## Cut here '##########################################

// ================================================================
//     CPU1 12V Sensor SDR entry (0Ah)
// ================================================================

_SDR_TYPE      01
_REC_LEN       0038

   // Sensor Record Header
   000B               // Record ID
   51                 // SDR Version
   01                 // Record Type
   33                 // Record Length

   // Record Key Bytes
   20                 // Sensor Owner ID
   00                 // Sensor Owner LUN
   0A                 // Sensor Number

   // Record Body Bytes
   07                 // Entity ID
   01                 // Entity Instance
   79                 // Sensor Initialization
   68                 // Sensor Capabilities
   02                 // Sensor Type
   01                 // Event / Reading Base Type
   8532               // Assertion Event Mask
   8532               // Deassertion Event Mask
   1B1B               // Reading Mask & Settable / Readable Threshold Masks
   00                 // Sensor Units 1
   04                 // Sensor Units 2
   00                 // Sensor Units 3
   00                 // Linearization
   3E                 // M
   00                 // M, Tolerance
   60                 // B
   00                 // B, Accuracy
   00                 // Accuracy, Accuracy Exp
   D0                 // R exp, B exp
   07                 // Analog characteristic flags
   C1                 // Nominal Reading
   D2                 // Normal Maximum
   B3                 // Normal Minimum
   FF                 // Sensor Maximum Reading
   00                 // Sensor Minimum Reading
   00                 // Upper non-recoverable
   D9                 // Upper critical
   D3                 // Upper non-critical
   00                 // Lower non-recoverable
   AD                 // Lower critical
   B2                 // Lower non-critical
   02                 // Positive hysterisis value
   02                 // Negative hysterisis value
   00                 // Reserved
   00                 // Reserved
   00                 // OEM
   C8                 // Type/Length Code
   'CPU1 12V'         // String Bytes


######################## Cut here '##########################################

// ================================================================
//     Proc1 VCCP Sensor SDR entry (15h)
// ================================================================
_SDR_TYPE      02
_REC_LEN       002A

   // Sensor Record Header
   0016               // Record ID
   51                 // SDR Version
   02                 // Record Type
   25                 // Record Length

   // Record Key Bytes
   20                 // Sensor Owner ID
   00                 // Sensor Owner LUN
   15                 // Sensor Number

   // Record Body Bytes
   03                 // Entity ID
   01                 // Entity Instance
   79                 // Sensor Initialization
   68                 // Sensor Capabilities
   02                 // Sensor Type
   03                 // Event / Reading Base Type
   0100               // Assertion Event Mask
   0100               // Deassertion Event Mask
   0100               // Reading Mask & Settable / Readable Threshold Masks
   C0                 // Sensor Units 1
   00                 // Sensor Units 2
   00                 // Sensor Units 3
   0100               // Sensor Record Sharing
   00                 // Positive-going Threshold Hysteresis
   00                 // Negative-going Threshold Hysteresis
   00                 // Reserved
   00                 // Reserved
   00                 // Reserved
   00                 // OEM
   CA                 // Type/Length Code
   'Proc1 VCCP'       // String Bytes
_______________________________________________
lm-sensors mailing list
lm-sensors at lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors