[lm-sensors] Winbond W83627HF - deactivated

[Albert]

On 06/07/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote:
> Albert wrote:
> > Hi Rudolf
> > On 06/07/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote:
> This errors are normal. Ignore them.

It seems that I was too hasty in replying. I ran sensors-detect again
and it did detect the chip.

# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:   +0.90 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
VCore 2:   +1.52 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
+3.3V:     +3.30 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +4.95 V  (min =  +4.76 V, max =  +5.24 V)
+12V:     +11.92 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:      -2.16 V  (min = -13.18 V, max = -10.80 V)
-5V:       -3.49 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +5.03 V  (min =  +4.76 V, max =  +5.24 V)       ALARM
VBat:      +2.05 V  (min =  +2.40 V, max =  +3.60 V)
fan1:        0 RPM  (min = 225000 RPM, div = 2)
fan2:        0 RPM  (min = 7417 RPM, div = 2)
fan3:        0 RPM  (min = 675000 RPM, div = 2)
temp1:       +47°C  (high =   +73°C, hyst =   -28°C)   sensor = thermistor
temp2:     +73.0°C  (high =   +80°C, hyst =   +75°C)   sensor = thermistor
temp3:     -46.0°C  (high =   +80°C, hyst =   +75°C)   sensor = thermistor
vid:      +0.000 V  (VRM Version 8.2)
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm disabled

eeprom-i2c-0-50
Adapter: SMBus I801 adapter at d800
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

Now to set up the alarms...

Thanks for your help. It is much appreciated.

Albert