[lm-sensors] ASUS P4P 800 and sensors.conf

[mahashakti89]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek a écrit :
> 
> Hello,
> 
>> I am using an ASUS P4P800 motherboard, and I cannot manage it to get
>> lm-sensors to work properly ; I mean some output values are obviously
>> quite wrong  :
>>
>>> w83627thf-isa-0290 Adapter: ISA adapter in0:       +1.57 V  (min = 
>>> +1.46 V, max =  +1.60 V)
>>> in1:       +3.14 V  (min =  +2.85 V, max =  +3.47 V)             
>>> e/claude/senso
>>> in2:       +3.23 V  (min =  +3.14 V, max =  +3.47 V)
>>> in3:       +2.96 V  (min =  +2.85 V, max =  +3.15 V)
>>> in4:       +4.08 V  (min =  +0.34 V, max =  +0.80 V)       ALARM
>>> in7:       +2.99 V  (min =  +2.83 V, max =  +3.12 V)
>>> in8:       +0.29 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
>>> fan1:     1795 RPM  (min = 11250 RPM, div = 8)              ALARM
>>> fan2:     2235 RPM  (min = 5113 RPM, div = 4)              ALARM
>>> fan3:        0 RPM  (min =  620 RPM, div = 128)              ALARM
>>> temp1:       +50°C  (high =   +60°C, hyst =   +17°C)   sensor =
>>> thermistor
>>> temp2:     +41.0°C  (high =   +80°C, hyst =   +75°C)   sensor =
>>> thermistor
>>> temp3:     -48.0°C  (high =   +80°C, hyst =   +75°C)   sensor =
>>> thermistor
>>> vid:      +1.525 V  (VRM Version 9.0)
>>> alarms:
>>> beep_enable:
>>>           Sound alarm enabled
>>
>> I am ashamed to say that I didn't find the solution to get lm-sensors
>> work ,  so I could need some good help to get a working sensors.conf for
>> this motherboard and also the explication of the thing in order to
>> understand how to solve this problem next time.
> 
> There is a problem that the chip manufacturers must scale down the the
> voltages to fit the ADC converters to its range. Problem is that the
> manuf. are free
> to choose whatever resistors for scaling.
> 
> If you use acpi, please can you send us the dsdt.bin
> file?
> 
> You can obtain it via cat /proc/acpi/dsdt > /tmp/dsdt.bin
> 
> Thanks,
> regards
> Rudolf
> 
> 
 Thanks for answering ...

You can find the file attached ...

mahashakti89
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEcpTXPPuyRSaD7LoRAtD4AJ0YfoTxNZ+OGMKTE5qmbwyMaQjLNgCgrK/A
ZSRtIA9yvusw3VeUE2Prrso=
=p+UP
-----END PGP SIGNATURE-----
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dsdt.bin
Type: application/octet-stream
Size: 14381 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060523/a4af328d/attachment.bin