[lm-sensors] [PATCH 1/2] hwmon/sis5595: Convert to a platform driver

[Ivo Manca]

Hey Jean,

I succeeded in compiling and testing 2.6.22-rc3 with your submitted patches. 
It does not seem to work. Maybe I'm doing something wrong here, or am 
overlooking something really big? I am quite new to this, after all.
I will patch a new and clean kernel tomorrow and compile it again, just to 
make sure I didn't mess anything up (which might be the case). Is it 
possible for you to send the patches as attachment? Seems like my mailclient 
messed them up the first time, so I might have messed it up trying to get 
them to work (even though it didn't give any errors the last time I 
patched..) ;/. It also doesn't give errors upon modprobing.

So far my output:

--
[root at localhost detect]# uname -r
2.6.22-rc3

[root at localhost detect]# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

[root at localhost detect]# lsmod
Module                  Size  Used by
i2c_dev                 9860  0
ne2k_pci               12128  0
8390                   11520  1 ne2k_pci
sis5595                15500  0
hwmon                   6404  1 sis5595
i2c_sis630             11276  0
i2c_sis5595            10244  0

--
[root at localhost ~]# uname -r
2.6.19-1.2911.fc6

[root at localhost ~]# sensors
sis5595-isa-0290
Adapter: ISA adapter
VCore 1:   +2.86 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
VCore 2:   +3.41 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
+3.3V:     +2.77 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
+5V:       +3.44 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
+12V:     +14.90 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
fan1:        0 RPM  (min =   -1 RPM, div = 2)          ALARM
fan2:        0 RPM  (min =   -1 RPM, div = 2)          ALARM
alarms:   Board temperature input (usually LM75 chips) ALARM

[root at localhost ~]# lsmod
Module                  Size  Used by
autofs4                25797  2
dmfe                   24677  0
ipv6                  276481  12
dm_mirror              26897  0
dm_multipath           23241  0
dm_mod                 63449  2 dm_mirror,dm_multipath
parport_pc             31205  1
lp                     16905  0
parport                40841  2 parport_pc,lp
snd_cmipci             39521  0
gameport               20297  1 snd_cmipci
floppy                 61477  0
snd_seq_dummy           8133  0
snd_seq_oss            37057  0
snd_seq_midi_event     11841  1 snd_seq_oss
snd_seq                57009  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            46433  0
snd_mixer_oss          20545  1 snd_pcm_oss
snd_pcm                80965  2 snd_cmipci,snd_pcm_oss
snd_page_alloc         14281  1 snd_pcm
snd_opl3_lib           14913  1 snd_cmipci
ne2k_pci               15265  0
snd_timer              26693  3 snd_seq,snd_pcm,snd_opl3_lib
8390                   14789  1 ne2k_pci
snd_hwdep              13637  1 snd_opl3_lib
pcspkr                  7360  0
i2c_sis630             11853  0
i2c_sis5595            11717  0
sis5595                19401  0
hwmon                   7621  1 sis5595
i2c_isa                 9665  1 sis5595
snd_mpu401_uart        13249  1 snd_cmipci
i2c_core               26049  4 i2c_sis630,i2c_sis5595,sis5595,i2c_isa
snd_rawmidi            28481  1 snd_mpu401_uart
snd_seq_device         12365  5 
snd_seq_dummy,snd_seq_oss,snd_seq,snd_opl3_lib,snd_rawmidi
snd                    58181  12 
snd_cmipci,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore              12193  1 snd
ext3                  136905  2
jbd                    65001  1 ext3
ehci_hcd               35661  0
ohci_hcd               25433  0
uhci_hcd               28237  0

Ivo
----- Original Message ----- 
From: "Jean Delvare" <khali at linux-fr.org>
To: "Ivo Manca" <pinkel at gmail.com>
Cc: <lm-sensors at lm-sensors.org>
Sent: Monday 4 June 2007 17:37
Subject: Re: [lm-sensors] [PATCH 1/2] hwmon/sis5595: Convert to a platform 
driver


> Ivo,
>
> On Mon, 4 Jun 2007 14:42:30 +0200, Ivo Manca wrote:
>> I'll try to get it working on the pc. Since it's only a 333mhz Celeron 
>> cpu
>> with about 32MB of ram, it might take some while to fetch a new kernel 
>> and
>> compile it ;). Or are there any other ways I can compile it with less
>> effort?
>
> If you have another system of the same architecture, you can simply
> compile your kernel there, make a staged install (set INSTALL_PATH and
> INSTALL_MOD_PATH) and copy all the files over the network.
>
> Or if you have other systems with the same architecture _and_ compiler,
> look into distcc. I have been using it some times ago and it was
> working fine.
> http://distcc.samba.org/
>
> -- 
> Jean Delvare