[lm-sensors] Possible support for the SMSC SCH5317? (found on HP dc7700 hardware)

[Juerg Haefliger]

Hi Simon,

On 6/18/07, Simon Farnsworth <simon.farnsworth at onelan.co.uk> wrote:
> Simon Farnsworth wrote:
> > sensors output:
> >
> > # sensors
> > smsc47b397-isa-0480
> > Adapter: ISA adapter
> > temp1:       +44°C
> > temp2:       +53°C
> > temp3:       +26°C
> > temp4:      -128°C
> > fan1:     2011 RPM
> > fan2:       82 RPM
> > fan3:     1262 RPM
> > fan4:     1095 RPM
> >
> > temp1 and temp2 both look likely for CPU, while temp3 might well be
> > system temperature. temp4 is completely out, and I'm not sure how I'd
> > relate the fan speeds to the fans in the system (I have a fan in the
> > front, a CPU fan, and a fan in the PSU.
>
> I've now experimented with cpuburn and stopping fans. It looks like 82
> RPM is the lowest speed this chip reports, as stopping a fan briefly
> caused it to report 82 RPM.
>
> I've determined that on my HP dc7700, temp1 is CPU temperature, temp2
> appears to be chipset temperature, and temp3 is system temperature.
>
> fan1 is CPU, fan3 is PSU fan, and fan4 is the chassis fan on the front
> of the box. fan2 and temp4 appear to be disconnected.
> --
> Hope this is of interest to someone,

If you have a sensors.conf for your system, please post it and I'll
put it in the Wiki.

Thanks
...juerg


> Simon Farnsworth
>
>