[lm-sensors] SMSC47m1 Error inserting and Not configured - will notuse errors

[Jean Delvare]

On Mon, 5 Mar 2007 21:46:46 +0100, Jan van Tiggelen wrote:
> Sorry for posting this message again. But since there's not reply to this
> topic at all, I was still hoping that someone could help out on the issue
> I've described below...
> 
> 
> -----Original Message-----
> From: lm-sensors-bounces at lm-sensors.org
> [mailto:lm-sensors-bounces at lm-sensors.org] On Behalf Of Jan van Tiggelen
> Sent: Tuesday, February 27, 2007 11:04 PM
> To: lm-sensors at lm-sensors.org
> Subject: [lm-sensors] SMSC47m1 Error inserting and Not configured - will
> notuse errors
> 
> The issue's been bugging me for a few days, but nevertheless I hope this is
> an issue which can be sorted out. So here goes with the details:
> 
> FSC micro-atx mainboard (W26361-W39) with an SMC LPC47M107S-MC onboard (I
> physically checked the presence! ;) )
>  
> Installed Fedora Core 6
> 2.6.19-1.2911.fc6 
> i686 i686 i386 GNU/Linux
> 
> Sensors version 2.10.1 with libsensors version 2.10.1
> 
> Sensors-detect returns (as it seems) the proper values:
> modprobe.conf:
> # I2C module options
> alias char-major-89 i2c-dev
> 
> rc.local:
> # I2C adapter drivers
> modprobe i2c-i801
> modprobe i2c-isa
> # I2C chip drivers
> modprobe eeprom
> modprobe smsc47m1
> sleep 2 # optional
> /usr/bin/sensors -s # recommended
> 
> Everything seems to load properly:
> # lsmod |grep i2c
> i2c_isa                 9665  0
> i2c_ec                  9281  1 sbs
> i2c_i810                9797  0
> i2c_algo_bit           12105  1 i2c_i810
> i2c_i801               11853  0
> i2c_core               26049  5 i2c_isa,eeprom,i2c_ec,i2c_algo_bit,i2c_i801
> 
> But modprobe smsc47m1 seems to cause the initial error: 
> FATAL: Error inserting smsc47m1
> (/lib/modules/2.6.19-1.2911.fc6/kernel/drivers/hwmon/smsc47m1.ko): No such
> device
> 
> And dmesg returns:
> smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
> i2c_adapter i2c-9191: Device at 0x800 is not configured, will not use

It means just what the message says: your Super-I/O chip is not
configured to monitor and control your fans. The pins are used for a
different functions.

Do you have any reason to believe that your fans are actually connected
to this chip?

-- 
Jean Delvare