[lm-sensors] no sensors were detected with Intel Corporation 82801H (ICH8 Family)

Juerg Haefliger juergh at gmail.com
Thu Nov 15 18:04:32 CET 2007


Hi Kessia,

>
>
> The SpeedFan say me that... I think isnt good. I think was my laptop model
> very new for support.
>
>
>
> ERROR collecting CPU Usage : 1 (Unable to locate the "Processor" performance
> object)
> Win9x:NO 64Bit:NO GiveIO:YES SpeedFan:YES
> I/O properly initialized
> Linked ISA BUS at $0290
> Linked Intel 82801HB ICH8 SMBUS at $10C0
> Scanning ISA BUS at $0290...
> DELL Support Enabling has been disabled
> because SYSTEM CALLS were unsuccessful
> Please, report if you think this is an error
> Scanning Intel SMBus at $10C0...
> End of detection
> INFO : NO SUPPORTED CHIP DETECTED
>

Do you see any voltage/fan information in the BIOS? Can you run
'isadump -k 0x55 0x2e 0x2f' and post the output to the list?

...juerg


>
>
>
>
> On 11/14/07, Juerg Haefliger < juergh at gmail.com> wrote:
> > Hi Kessia,
> >
> >
> > > Hi folks,
> > >
> > > I'm using ubuntu gutsy in dell vostro 1400 laptop. I try run
> sensors-detect,
> > > but this dont recognize my sensors. Below is my configs. thanks:
> > >
> > >
> --------------------------------------------------------------------------------------------------------------
> > > lspci output:
> > >
> > > 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
> > > Controller Hub (rev 0c)
> > > 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI
> Express
> > > Root Port (rev 0c)
> > > 00: 1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> > > Contoller #4 (rev 02)
> > > 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> > > Controller #5 (rev 02)
> > > 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> > > Controller #2 (rev 02)
> > > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> > > Controller (rev 02)
> > > 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
> Port
> > > 1 (rev 02)
> > > 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
> Port
> > > 2 (rev 02)
> > > 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
> Port
> > > 4 (rev 02)
> > > 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
> Port
> > > 6 (rev 02)
> > > 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> > > Controller #1 (rev 02)
> > > 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> > > Controller #2 (rev 02)
> > > 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
> > > Controller #3 (rev 02)
> > > 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
> > > Controller #1 (rev 02)
> > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
> > > 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
> > > Controller (rev 02)
> > > 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
> IDE
> > > Controller (rev 02)
> > > 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
> SATA
> > > AHCI Controller (rev 02)
> > > 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
> (rev
> > > 02)
> > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS
> (rev
> > > a1)
> > > 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
> (rev
> > > 05)
> > > 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
> Host
> > > Adapter (rev 22)
> > > 03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev
> 12)
> > > 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
> Adapter
> > > (rev 12)
> > > 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev
> 12)
> > > 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
> > > Ethernet PCI Express (rev 02)
> > > 0c:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n
> (rev
> > > 03)
> > >
> > >
> > >
> --------------------------------------------------------------------------------------------------------------
> > > uname -a:
> > >  Linux rainbows 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007
> i686
> > > GNU/Linux
> > >
> > >
> > >
> --------------------------------------------------------------------------------------------------------------
> > > lm-sensors version:
> > > Version: 1:2.10.4-1ubuntu1 (oficial package)
> > >
> > >
> --------------------------------------------------------------------------------------------------------------
> > > sensors-detect output:
> > > # sensors-detect revision 4609 (2007-07-14 09:28:39 -0700)
> > >
> > > This program will help you determine which kernel modules you need
> > > to load to use lm_sensors most effectively. It is generally safe
> > > and recommended to accept the default answers to all questions,
> > > unless you know what you're doing.
> > >
> > > We can start with probing for (PCI) I2C or SMBus adapters.
> > > Do you want to probe now? (YES/no):
> > > Probing for PCI bus adapters...
> > > Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8
> > >
> > >  We will now try to load each adapter module in turn.
> > > Load `i2c-i801' (say NO if built into your kernel)? (YES/no):
> > > Module loaded successfully.
> > > If you have undetectable or unsupported adapters, you can have them
> > > scanned by manually loading the modules before running this script.
> > >
> > > We are now going to do the I2C/SMBus adapter probings. Some chips may
> > > be double detected; we choose the one with the highest confidence
> > >  value in that case.
> > > If you found that the adapter hung after probing a certain address,
> > > you can specify that address to remain unprobed.
> > >
> > > Next adapter: NVIDIA i2c adapter  (i2c-0)
> > > Do you want to scan it? (YES/no/selectively):
> > > Can't open /dev/i2c-0
> > >
> > > Next adapter: NVIDIA i2c adapter  (i2c-1)
> > > Do you want to scan it? (YES/no/selectively):
> > > Can't open /dev/i2c-1
> > >
> > > Next adapter: NVIDIA i2c adapter  (i2c-2)
> > > Do you want to scan it? (YES/no/selectively):
> > > Can't open /dev/i2c-2
> > >
> > > Next adapter: SMBus I801 adapter at 10c0 (i2c-3)
> > > Do you want to scan it? (YES/no/selectively):
> > > Client found at address 0x44
> > > Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
> > > Client found at address 0x50
> > > Probing for `Analog Devices ADM1033'...                     No
> > > Probing for `Analog Devices ADM1034'...                     No
> > > Probing for `SPD EEPROM'...                                 Yes
> > >     (confidence 8, not a hardware monitoring chip)
> > > Probing for `EDID EEPROM'...                                No
> > > Client found at address 0x52
> > > Probing for `Analog Devices ADM1033'...                     No
> > > Probing for `Analog Devices ADM1034'...                     No
> > > Probing for `SPD EEPROM'...                                 Yes
> > >     (confidence 8, not a hardware monitoring chip)
> > > Probing for `EDID EEPROM'...                                No
> > >
> > > Some chips are also accessible through the ISA I/O ports. We have to
> > > write to arbitrary I/O ports to probe them. This is usually safe though.
> > > Yes, you do have ISA I/O ports even if you do not have any ISA slots!
> > > Do you want to scan the ISA I/O ports? (YES/no):
> > > Probing for `National Semiconductor LM78' at 0x290...       No
> > > Probing for `National Semiconductor LM78-J' at 0x290...     No
> > > Probing for `National Semiconductor LM79' at 0x290...       No
> > > Probing for `Winbond W83781D' at 0x290...                   No
> > > Probing for `Winbond W83782D' at 0x290...                   No
> > > Probing for `Silicon Integrated Systems SIS5595'...         No
> > > Probing for `VIA VT82C686 Integrated Sensors'...            No
> > > Probing for `VIA VT8231 Integrated Sensors'...              No
> > > Probing for `IPMI BMC KCS' at 0xca0...                      No
> > > Probing for `IPMI BMC SMIC' at 0xca8...                     No
> > >
> > > Some Super I/O chips may also contain sensors. We have to write to
> > > standard I/O ports to probe them. This is usually safe.
> > > Do you want to scan for Super I/O sensors? (YES/no):
> > > Probing for Super-I/O at 0x2e/0x2f
> > > Trying family `National Semiconductor'...                   No
> > > Trying family `SMSC'...                                     Yes
> > > Found unknown chip with ID 0x3201
> > > Probing for Super-I/O at 0x4e/0x4f
> > > Trying family `National Semiconductor'...                   No
> > > Trying family `SMSC'...                                     No
> > > Trying family `VIA/Winbond/Fintek'...                       No
> > > Trying family `ITE'...                                      No
> >
> > As sensor-detect says, this chip is unknown. Can you run Speedfan
> > under windows on this machine? Speedfan might tell us what chip it is
> > and from that we can try to figure out if it's compatible with
> > anything that's currently supported.
> >
> > ...juerg
> >
> >
> >
> > > Some CPUs or memory controllers may also contain embedded sensors.
> > > Do you want to scan for them? (YES/no):
> > > AMD K8 thermal sensors...                                   No
> > > Intel Core family thermal sensor...                         No
> > > Intel AMB FB-DIMM thermal sensor...                         No
> > >
> > > Sorry, no sensors were detected.
> > > Either your sensors are not supported, or they are connected to an
> > > I2C or SMBus adapter that is not supported. See doc/FAQ,
> > > doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
> > > (FAQ #4.24.3) for further information.
> > > If you find out what chips are on your board, check
> > > http://www.lm-sensors.org/wiki/Devices for driver status.
> > >
> > >
> > >
> > >
> --------------------------------------------------------------------------------------------------------------
> > >
> > >
> > > --
> > > Kessia Pinheiro
> > > Bacharelanda em Ciência da Computação
> > > Universidade Federal da Bahia
> > > Linux Counter User #389695 [http://counter.li.org]
> > > _______________________________________________
> > > lm-sensors mailing list
> > > lm-sensors at lm-sensors.org
> > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> > >
> >
>
>
>
> --
>
>
> Kessia Pinheiro
> Bacharelanda em Ciência da Computação
> Universidade Federal da Bahia
> Linux Counter User #389695 [http://counter.li.org ]




More information about the lm-sensors mailing list