[lm-sensors] f71882fg and MSI K9AG Neo2-Digital

[Roland Langner]

Hans de Goede schrieb:
> > Roland Langner wrote:
>> >> Hi,
>> >>
>> >> here is my sensors output for MSI K9AG Neo2-Digital
>> >>
>> >> k8temp-pci-00c3
>> >> Adapter: PCI adapter
>> >> Core0 Temp:
>> >>              +15°C
>> >> Core1 Temp:
>> >>              +15°C
>> >>
>> >> f71882fg-isa-0600
>> >> Adapter: ISA adapter
>> >> 3.3V:      +3.34 V
>> >> Vcore:     +0.98 V  (max =  +2.04 V)
>> >> Vram:      +2.19 V
>> >> 5VSB:      +5.05 V
>> >> +5V:       +3.78 V
>> >> 12V:       +6.51 V
>> >> Vchip:     +0.48 V
>> >> 3VSB:      +3.33 V
>> >> Battery:   +3.20 V
>> >> CPU:       844 RPM
>> >> System:      0 RPM  ALARM
>> >> Power:     960 RPM
>> >> Aux:         0 RPM  ALARM
>> >> CPU:          +9°C  (high =   +85°C, hyst =   +81°C)
>> >>                     (crit =  +100°C, hyst =   +96°C)  sensor =
transistor
>> >> System:      +92°C  (high =   +85°C, hyst =   +81°C)  ALARM
>> >>                     (crit =  +100°C, hyst =   +96°C)  sensor =
thermistor
>> >> Temp3:       +26°C  (high =   +70°C, hyst =   +68°C)
>> >>                     (crit =   +85°C, hyst =   +83°C)  sensor =
thermistor
>> >>
>> >>
>> >> Here the config:
>> >>
>> >> chip "f71882fg-*"
>> >>
>> >> # Temperature
>> >>     label temp1       "CPU"
>> >>     label temp2       "System"
>> >>     label temp3       "Temp3"
>> >>
>> >> # Fans
>> >>     label fan1        "CPU"
>> >>     label fan2        "System"
>> >>     label fan3        "Power"
>> >>     label fan4        "Aux"
>> >>
>> >> # Voltage
>> >>     label in0 "3.3V"
>> >>     label in1 "Vcore"
>> >>     label in2 "Vram"
>> >>     label in3 "5VSB"
>> >>     label in4 "+5V"
>> >>     label in5 "12V"
>> >>     label in6 "Vchip"
>> >>     label in7 "3VSB"
>> >>     label in8 "Battery"
>> >>
>> >> # never change the in0, in7 and in8 compute, these are hardwired
in the
>> >> chip!
>> >>     compute in0 (@ * 2), (@ / 2)
>> >>     compute in2 (@ * 2), (@ / 2)
>> >>     compute in3 (@ * (1+200/47)), (@ / (1+200/47))
>> >>     compute in4 (@ * (1+200/47)), (@ / (1+200/47))
>> >>     compute in5 (@ * (1+200/20)), (@ / (1+200/20))
>> >>     compute in7 (@ * 2), (@ / 2)
>> >>     compute in8 (@ * 2), (@ / 2)
>> >>
>> >>
>> >>
>> >> Some Voltages are not right. (Vcore is)
>> >> The board has 3 Fan-conectors. Fan at connector 3 doesn't show up.
>> >> CPU Temp is to low.
>> >>
>> >> Config is a variation of msi P965 Platinum.
>> >> Can someone help me with the config?
>> >>
> >
> > Sure, I'm the writer and maintainer of the f71882fg driver and I'll try
> > to help. Can you for starters please write down the BIOS sensors
> > readings (all of them, in order they appear in the BIOS) and post those,
> > then I can try to puzzle the pieces together.
> >
Hi Hans,

sorry, yesterday i didn't replay to the list.

thanks for the driver and the help.

Here are the BIOS-Values:

CPU Temp:   10°C
System Temp 25°C
CPU Fan Speed  843
Sys Fan1 Speed 964
CPU Vcore   0.984V
3.3VCC      3.344V
5V          5.088V
12V        12.056V
3.3V SB     3.344V


CPU Temp in BIOS seems also a bit to low (room temp is 15°C)

Regards

Roland