[lm-sensors] Toshiba Satellite M100-164 no data from sensors
Petr Bartel
bartel at irix.cz
Tue Oct 23 09:34:40 CEST 2007
Thanks for a fast answer. I supposed every motherboard has these sensors.
Am I wrong ? The BIOS isn't able to show any other information. Is there
possibility, that I haven't got any sensors on my motherboard ?
chipset Mobile Intel 945GM Express Chipset
processor Core Duo T2300
model Toshiba Satellite m100-154
probably distributed only across Europe
Peter
--
**************************************************
* ICQ 74097173 tel. 312 244 018 *
* Irix a.s. Petr Bartel servis *
* Fingerprint klíče *
8DB8 3AB2 6865 45F4 3E84 4980 CCED 20B1 CC6B B649
**************************************************
Mon, Oct 22, 2007 at 05:40:21PM CEST, juergh at gmail.com napsal(a):
> Hi Petr,
>
>
> On 10/22/07, Petr Bartel <bartel at irix.cz> wrote:
> > Good afternoon,
> > I can't get any data from sensors (CPU fan, voltage....).
> > Can you advise to me, what will I do ?
> >
> > lspci -vvv
> >
> > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> > Latency: 0
> > Capabilities: <access denied>
> >
> > 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 17
> > Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K]
> > Region 1: I/O ports at 1800 [size=8]
> > Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
> > Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K]
> > Capabilities: <access denied>
> >
> > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K]
> > Capabilities: <access denied>
> >
> > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 22
> > Region 0: Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
> > Capabilities: <access denied>
> >
> > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > I/O behind bridge: 0000f000-00000fff
> > Memory behind bridge: fff00000-000fffff
> > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> > Capabilities: <access denied>
> >
> > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> > I/O behind bridge: 0000f000-00000fff
> > Memory behind bridge: d0100000-d01fffff
> > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> > Capabilities: <access denied>
> >
> > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 20
> > Region 4: I/O ports at 1820 [size=32]
> >
> > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin B routed to IRQ 18
> > Region 4: I/O ports at 1840 [size=32]
> >
> > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin C routed to IRQ 21
> > Region 4: I/O ports at 1860 [size=32]
> >
> > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin D routed to IRQ 17
> > Region 4: I/O ports at 1880 [size=32]
> >
> > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 20
> > Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K]
> > Capabilities: <access denied>
> >
> > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Bus: primary=00, secondary=05, subordinate=09, sec-latency=64
> > I/O behind bridge: 00002000-00002fff
> > Memory behind bridge: d0000000-d00fffff
> > Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
> > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> > Capabilities: <access denied>
> >
> > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Capabilities: <access denied>
> >
> > 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0
> > Interrupt: pin B routed to IRQ 18
> > Region 0: I/O ports at 01f0 [size=8]
> > Region 1: I/O ports at 03f4 [size=1]
> > Region 2: I/O ports at 0170 [size=8]
> > Region 3: I/O ports at 0374 [size=1]
> > Region 4: I/O ports at 18b0 [size=16]
> > Capabilities: <access denied>
> >
> > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Interrupt: pin B routed to IRQ 18
> > Region 4: I/O ports at 18c0 [size=32]
> >
> > 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
> > Subsystem: Intel Corporation Unknown device 1041
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 16
> > Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: <access denied>
> >
> > 05:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 168, Cache Line Size: 128 bytes
> > Interrupt: pin A routed to IRQ 17
> > Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K]
> > Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
> > Memory window 0: 50000000-53fff000 (prefetchable)
> > Memory window 1: 54000000-57fff000
> > I/O window 0: 00002400-000024ff
> > I/O window 1: 00002800-000028ff
> > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> > 16-bit legacy interface ports at 0001
> >
> > 05:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> > Interrupt: pin B routed to IRQ 16
> > Region 0: Memory at d0007000 (32-bit, non-prefetchable) [size=2K]
> > Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=16K]
> > Capabilities: <access denied>
> >
> > 05:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
> > Interrupt: pin C routed to IRQ 21
> > Region 0: Memory at d0005000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: <access denied>
> >
> > 05:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller (prog-if 01)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
> > Interrupt: pin D routed to IRQ 18
> > Region 0: Memory at d0007800 (32-bit, non-prefetchable) [size=256]
> > Capabilities: <access denied>
> >
> > 05:08.0 Ethernet controller: Intel Corporation PRO/100 VM Network Connection (rev 02)
> > Subsystem: Toshiba America Info Systems Unknown device ff00
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 19
> > Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
> > Region 1: I/O ports at 2000 [size=64]
> > Capabilities: <access denied>
> >
> >
> > sensors-detect
> >
> > # sensors-detect revision 4609 (2007-07-14 09:28:39 -0700)
> >
> > This program will help you determine which kernel modules you need
> > to load to use lm_sensors most effectively. It is generally safe
> > and recommended to accept the default answers to all questions,
> > unless you know what you're doing.
> >
> > We can start with probing for (PCI) I2C or SMBus adapters.
> > Do you want to probe now? (YES/no): Probing for PCI bus adapters...
> > Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
> >
> > We will now try to load each adapter module in turn.
> > Module `i2c-i801' already loaded.
> > If you have undetectable or unsupported adapters, you can have them
> > scanned by manually loading the modules before running this script.
> >
> > We are now going to do the I2C/SMBus adapter probings. Some chips may
> > be double detected; we choose the one with the highest confidence
> > value in that case.
> > If you found that the adapter hung after probing a certain address,
> > you can specify that address to remain unprobed.
> >
> > Next adapter: SMBus I801 adapter at 18c0 (i2c-0)
> > Do you want to scan it? (YES/no/selectively): Client found at address 0x44
> > Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> > Client found at address 0x50
> > Probing for `Analog Devices ADM1033'... No
> > Probing for `Analog Devices ADM1034'... No
> > Probing for `SPD EEPROM'... Yes
> > (confidence 8, not a hardware monitoring chip)
> > Probing for `EDID EEPROM'... No
> > Client found at address 0x52
> > Probing for `Analog Devices ADM1033'... No
> > Probing for `Analog Devices ADM1034'... No
> > Probing for `SPD EEPROM'... Yes
> > (confidence 8, not a hardware monitoring chip)
> > Probing for `EDID EEPROM'... No
> >
> > Some chips are also accessible through the ISA I/O ports. We have to
> > write to arbitrary I/O ports to probe them. This is usually safe though.
> > Yes, you do have ISA I/O ports even if you do not have any ISA slots!
> > Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No
> > Probing for `National Semiconductor LM78-J' at 0x290... No
> > Probing for `National Semiconductor LM79' at 0x290... No
> > Probing for `Winbond W83781D' at 0x290... No
> > Probing for `Winbond W83782D' at 0x290... No
> > Probing for `Silicon Integrated Systems SIS5595'... No
> > Probing for `VIA VT82C686 Integrated Sensors'... No
> > Probing for `VIA VT8231 Integrated Sensors'... No
> > Probing for `IPMI BMC KCS' at 0xca0... No
> > Probing for `IPMI BMC SMIC' at 0xca8... No
> >
> > Some Super I/O chips may also contain sensors. We have to write to
> > standard I/O ports to probe them. This is usually safe.
> > Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f
> > Trying family `National Semiconductor'... No
> > Trying family `SMSC'... No
> > Trying family `VIA/Winbond/Fintek'... No
> > Trying family `ITE'... No
> > Probing for Super-I/O at 0x4e/0x4f
> > Trying family `National Semiconductor'... No
> > Trying family `SMSC'... No
> > Trying family `VIA/Winbond/Fintek'... No
> > Trying family `ITE'... No
> >
> > Some CPUs or memory controllers may also contain embedded sensors.
> > Do you want to scan for them? (YES/no): AMD K8 thermal sensors... No
> > Intel Core family thermal sensor... Success!
> > (driver `coretemp')
> > Intel AMB FB-DIMM thermal sensor... No
> >
> > Now follows a summary of the probes I have just done.
> > Just press ENTER to continue:
> > Driver `coretemp' (should be inserted):
> > Detects correctly:
> > * Chip `Intel Core family thermal sensor' (confidence: 9)
> >
> > I will now generate the commands needed to load the required modules.
> > Just press ENTER to continue:
> > To make the sensors modules behave correctly, add these lines to
> > /etc/modules:
> >
> > #----cut here----
> > # Chip drivers
> > coretemp
> > #----cut here----
> >
> > Do you want to add these lines to /etc/modules automatically? (yes/NO)
> >
> > lsmod
> >
> > Module Size Used by
> > i2c_dev 8196 0
> > i915 25216 2
> > drm 83348 3 i915
> > tun 11776 1
> > af_packet 23176 2
> > parport_pc 36260 0
> > ppdev 9732 0
> > parport 37448 2 parport_pc,ppdev
> > ipv6 265188 14
> > dm_snapshot 18984 0
> > dm_mirror 24832 0
> > dm_mod 59200 2 dm_snapshot,dm_mirror
> > coretemp 7808 0
> > tifm_sd 12168 0
> > ipw3945 198176 0
> > ieee80211 35656 1 ipw3945
> > ieee80211_crypt 6400 1 ieee80211
> > snd_hda_intel 277532 1
> > snd_pcm_oss 43680 0
> > snd_pcm 80388 2 snd_hda_intel,snd_pcm_oss
> > snd_mixer_oss 17280 1 snd_pcm_oss
> > snd_seq_dummy 4100 0
> > snd_seq_oss 33152 0
> > snd_seq_midi 8736 0
> > snd_rawmidi 24992 1 snd_seq_midi
> > snd_seq_midi_event 7680 2 snd_seq_oss,snd_seq_midi
> > joydev 10688 0
> > snd_seq 53072 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> > snd_timer 23940 2 snd_pcm,snd_seq
> > snd_seq_device 8588 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> > sdhci 18444 0
> > shpchp 33812 0
> > rtc 13592 0
> > tifm_7xx1 8192 0
> > i2c_i801 9360 0
> > ehci_hcd 34700 0
> > uhci_hcd 25868 0
> > intel_agp 24724 1
> > mmc_core 29444 2 tifm_sd,sdhci
> > tsdev 8768 0
> > ohci1394 32944 0
> > ieee1394 94264 1 ohci1394
> > tifm_core 10756 2 tifm_sd,tifm_7xx1
> > pci_hotplug 31776 1 shpchp
> > e100 36620 0
> > mii 5760 1 e100
> > i2c_core 25600 2 i2c_dev,i2c_i801
> > evdev 10624 0
> > psmouse 39568 0
> > agpgart 34252 3 drm,intel_agp
> > usbcore 142212 3 ehci_hcd,uhci_hcd
> > snd 54628 11 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> > soundcore 8672 1 snd
> > snd_page_alloc 10632 2 snd_hda_intel,snd_pcm
> > unix 28976 88
> >
> > sensors
> >
> > coretemp-isa-0000
> > Adapter: ISA adapter
> > Core 0: +16°C (high = +100°C)
> >
> > coretemp-isa-0001
> > Adapter: ISA adapter
> > Core 1: +16°C (high = +100°C)
> >
> > No others data :(
>
> What makes you think your machine can provide any other information
> than the core temp? Does the BIOS show any temperature/voltage
> information? What is the brand and model of your machine and
> motherboard?
>
> ...juerg
>
>
> > Thanks a lot for your support
> >
> > Your sincerely
> > Petr Bartel
> >
> > _______________________________________________
> > lm-sensors mailing list
> > lm-sensors at lm-sensors.org
> > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >
>
>
> ________ Information from NOD32 ________
> This message was checked by NOD32 Antivirus System for Linux Mail Servers.
> part000.txt - is OK
> http://www.eset.com
More information about the lm-sensors
mailing list