[lm-sensors] [PATCH] lm-sensors: Add more chip detection

[Jean Delvare]

On Fri, 11 Jul 2008 07:50:02 -0700, Juerg Haefliger wrote:
> > Hi Jean,
> >
> >
> >> Hi Juerg,
> >>
> >> Please set the attachment type to text/plain next time.
> >
> > Hmm... Gmail doesn't give me control over this (I think) and I haven't
> > change anything. Weird.

You may try adding .txt at the end of the file name to hint gmail at
giving it type text/plain. Or complain to the gmail admins until they
map .patch to type text/plain.

> >> On Thu, 10 Jul 2008 12:37:26 -0700, Juerg Haefliger wrote:
> >>> Add detection of VIA VT1212 and SMSC EMC2700LPC Super IOs.
> >>>
> >>> Signed-off-by: Juerg Haefliger <juergh at gmail.com>
> >>
> >>> Index: lm-sensors-3.0.0/prog/detect/sensors-detect
> >>> ===================================================================
> >>> --- lm-sensors-3.0.0.orig/prog/detect/sensors-detect  2008-07-10 12:16:17.709353000 -0700
> >>> +++ lm-sensors-3.0.0/prog/detect/sensors-detect       2008-07-10 12:28:41.895364000 -0700
> >>> @@ -1666,6 +1666,11 @@
> >>>       devid => 0x77,
> >>>        },
> >>>        {
> >>> +     name => "SMSC EMC2700LPC Super IO",
> >>> +     # no datasheet
> >>> +     devid => 0x67,
> >>> +      },
> >>> +      {
> >>>       name => "SMSC FDC37B72x Super IO",
> >>>       driver => "not-a-sensor",
> >>>       devid => 0x4c,
> >>> @@ -1908,6 +1913,11 @@
> >>>       alias_detect => sub { vt1211_alias_detect(@_); },
> >>>        },
> >>>        {
> >>> +     name => "VIA VT1212 Super IO Lite",
> >>> +     driver => "not-a-sensor",
> >>> +     devid => 0x3f,
> >>
> >> Are you sure? On Wilken's system, which according to the documentation
> >> has a VT1212 chip, sensors-detect says:
> >>
> >> Found unknown chip with ID 0xfc01
> >>
> >> Which would mean a devid value of 0xfc rather then 0x3f.
> >
> > From the datasheet (sorry for the formatting):
> > 7   Configuration Index   RW   00
> > 20   Device ID   RO   3F
> > 21   Device Revision   RO   01
> > 22   Power Down Control   RW   00
> > 23   LPC Wait State Select   RW   09
> > 24   GPIO Port 1 Pin Select   RW   00
> > 25   GPIO Port 2 Pin Select   RW   00
> 
> I just realized that there's two different device IDs for the two
> packaging options, 3F/3E. I'll respin the patch.

None of which matches what Wilken's system has... Very strange.

-- 
Jean Delvare