[lm-sensors] [patch 1/1] hwmon: add 0x8c id for smsc47b397 driver

[Jean Delvare]

On Fri, 29 Feb 2008 10:24:44 -0700, Craig Kelley wrote:
> From: Craig Kelley <namonai at gmail.com>
> 
> Added a new ID (0x8c) for the smsc47b397 hardware monitor driver.
> This ID is used by HP in, at least, their dc7700 line.
> 
> Signed-off-by: Craig Kelley <namonai at gmail.com>
> ---
> 
> --- drivers/hwmon/smsc47b397.c-orig     2008-02-29 07:54:18.000000000 -0800
> +++ drivers/hwmon/smsc47b397.c  2008-02-29 07:53:00.000000000 -0800
> @@ -331,11 +331,23 @@ exit:
>  static int __init smsc47b397_find(unsigned short *addr)
>  {
>         u8 id, rev;
> +       char *name;

Should be const.

> 
>         superio_enter();
>         id = superio_inb(SUPERIO_REG_DEVID);
> 
> -       if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
> +       switch(id) {
> +       case 0x81:
> +               name = "SCH5307-NS";
> +               break;
> +       case 0x6f:
> +               name = "LPC47B397-NC";
> +               break;
> +       case 0x85:
> +       case 0x8c:
> +               name = "SCH5317";
> +               break;
> +       default:
>                 superio_exit();
>                 return -ENODEV;
>         }
> @@ -348,8 +360,7 @@ static int __init smsc47b397_find(unsign
> 
>         printk(KERN_INFO DRVNAME ": found SMSC %s "
>                 "(base address 0x%04x, revision %u)\n",
> -               id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
> -              "LPC47B397-NC", *addr, rev);
> +               name, *addr, rev);
> 
>         superio_exit();
>         return 0;
> 

I've added ID 0x8c to sensors-detect:
http://www.lm-sensors.org/changeset/5133

-- 
Jean Delvare