[lm-sensors] [Bug?] W83697: Broken readings for fan speed 10% of the time
Bruno Prémont
bonbons at linux-vserver.org
Sat May 31 22:03:39 CEST 2008
On a Commell LE-365 I get readings for fan speed that are broken about
10% of the time.
The board has a Winbond W83697 chip (I can't check the exact chip name
on the board as it's hidden by a heatsink, the photo from Commell, as
as well as the manual indicate a HG, the kenrel reports:
[ 3.572831] w83627hf: Found W83697HF chip at 0x290
[ 3.572831] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[ 3.572831] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[ 3.572831] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0)
)
Below a sample (reformatted) output of
while sleep 1; do
date;
cat /sys/class/hwmon/hwmon0/device/fan1_input;
done
:
Sat May 31 21:11:23 CEST 2008 2070
Sat May 31 21:11:24 CEST 2008 2070
Sat May 31 21:11:25 CEST 2008 2070
Sat May 31 21:11:26 CEST 2008 2070
Sat May 31 21:11:27 CEST 2008 2070
Sat May 31 21:11:28 CEST 2008 2070
Sat May 31 21:11:29 CEST 2008 2057
Sat May 31 21:11:30 CEST 2008 2057
Sat May 31 21:11:31 CEST 2008 2070
Sat May 31 21:11:32 CEST 2008 2070
Sat May 31 21:11:33 CEST 2008 -1
Sat May 31 21:11:34 CEST 2008 -1
Sat May 31 21:11:35 CEST 2008 -1
Sat May 31 21:11:36 CEST 2008 -1
Sat May 31 21:11:37 CEST 2008 2057
Sat May 31 21:11:38 CEST 2008 2057
Sat May 31 21:11:39 CEST 2008 2057
Sat May 31 21:11:40 CEST 2008 2057
Sat May 31 21:11:41 CEST 2008 2070
Sat May 31 21:11:42 CEST 2008 2070
Sat May 31 21:11:43 CEST 2008 2070
Sat May 31 21:11:44 CEST 2008 2070
Sat May 31 21:11:45 CEST 2008 2057
Sat May 31 21:11:46 CEST 2008 2057
Sat May 31 21:11:47 CEST 2008 -1
Sat May 31 21:11:48 CEST 2008 -1
Sat May 31 21:11:49 CEST 2008 2070
Sat May 31 21:11:50 CEST 2008 2070
Sat May 31 21:11:51 CEST 2008 2057
Sat May 31 21:11:52 CEST 2008 2057
Sat May 31 21:11:53 CEST 2008 2057
Sat May 31 21:11:54 CEST 2008 2057
Sat May 31 21:11:55 CEST 2008 2057
Sat May 31 21:11:56 CEST 2008 2057
Sat May 31 21:11:58 CEST 2008 2057
Sat May 31 21:11:59 CEST 2008 2057
Sat May 31 21:12:00 CEST 2008 2070
Sat May 31 21:12:01 CEST 2008 2070
Sat May 31 21:12:02 CEST 2008 2057
Sat May 31 21:12:03 CEST 2008 2057
Sat May 31 21:12:04 CEST 2008 2083
Sat May 31 21:12:05 CEST 2008 2083
Sat May 31 21:12:06 CEST 2008 2057
Sat May 31 21:12:07 CEST 2008 2057
Sat May 31 21:12:08 CEST 2008 2070
Sat May 31 21:12:09 CEST 2008 2070
Sat May 31 21:12:10 CEST 2008 2070
Sat May 31 21:12:11 CEST 2008 2070
Sat May 31 21:12:12 CEST 2008 337500
Sat May 31 21:12:13 CEST 2008 337500
Sat May 31 21:12:14 CEST 2008 337500
Sat May 31 21:12:15 CEST 2008 337500
Sat May 31 21:12:16 CEST 2008 337500
Sat May 31 21:12:17 CEST 2008 337500
Sat May 31 21:12:18 CEST 2008 2070
Sat May 31 21:12:19 CEST 2008 2070
Sat May 31 21:12:20 CEST 2008 2070
Sat May 31 21:12:21 CEST 2008 2070
Sat May 31 21:12:22 CEST 2008 2070
Sat May 31 21:12:23 CEST 2008 2070
Sat May 31 21:12:24 CEST 2008 2070
Sat May 31 21:12:25 CEST 2008 2070
Sat May 31 21:12:26 CEST 2008 2057
Sat May 31 21:12:27 CEST 2008 2057
Sat May 31 21:12:28 CEST 2008 2070
Sat May 31 21:12:29 CEST 2008 2070
Sat May 31 21:12:30 CEST 2008 2070
Sat May 31 21:12:31 CEST 2008 2070
Sat May 31 21:12:32 CEST 2008 -1
The 337k RPM and -1 RPM do not make any sense.
I can't tell if this is a regression as I just started monitoring
a few sensor values (with older kernels I just did a few manual
checks but never noticed broken fan speeds)
In case there is more data I can provide, please ask.
As the board is not in production use I can easily try out patches.
Regards,
Bruno
I've configured the sensor chip with (lm_sensors-3.0.1)
chip "w83697hf-*"
label in0 "VCore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
label in7 "V5SB"
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((28/10)+1)*@ , @/((28/10)+1)
compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
set in0_min 0.844 * 0.95
set in0_max 0.844 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in4_min 12 * 0.90
set in4_max 12 * 1.10
set in7_min 5 * 0.95
set in7_max 5 * 1.05
set in8_min 3.0 * 0.80
set in8_max 3.0 * 1.20
set fan1_div 4
set fan1_min 1000
set fan2_min 0
Two sample outputs of sensors:
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +0.83 V (min = +0.80 V, max = +0.88 V)
+3.3V: +3.28 V (min = +3.14 V, max = +3.47 V)
+5V: +5.00 V (min = +4.76 V, max = +5.24 V)
+12V: +7.90 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: +1.95 V (min = -1.50 V, max = -11.13 V) ALARM
-5V: +2.64 V (min = -4.65 V, max = -5.95 V) ALARM
V5SB: +5.48 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.17 V (min = +2.40 V, max = +3.60 V)
fan1: 337500 RPM (min = 1328 RPM, div = 4)
fan2: 0 RPM (min = 0 RPM, div = 16)
temp1: +48.0 C (high = +56.0 C, hyst = -77.0 C) sensor =
thermistor temp2: +52.0 C (high = +100.0 C, hyst = +95.0 C)
sensor = thermistor beep_enable:enabled
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +0.82 V (min = +0.80 V, max = +0.88 V)
+3.3V: +3.28 V (min = +3.14 V, max = +3.47 V)
+5V: +5.00 V (min = +4.76 V, max = +5.24 V)
+12V: +7.84 V (min = +10.82 V, max = +13.19 V) ALARM
-12V: +1.95 V (min = -1.50 V, max = -11.13 V) ALARM
-5V: +2.64 V (min = -4.65 V, max = -5.95 V) ALARM
V5SB: +5.48 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.17 V (min = +2.40 V, max = +3.60 V)
fan1: 2083 RPM (min = 1328 RPM, div = 4)
fan2: 0 RPM (min = 0 RPM, div = 16)
temp1: +47.0 C (high = +56.0 C, hyst = -77.0 C) sensor =
thermistor temp2: +52.0 C (high = +100.0 C, hyst = +95.0 C)
sensor = thermistor beep_enable:enabled
Note: I tried divisors 4, 16, 32, all with same final behavior.
Kernel config snipplet:
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
Kernel messages:
[ 0.000000] Linux version 2.6.25.3 (bruno at venus) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 Mon May 12 19:57:16 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
[ 0.000000] BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 62MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
...
[ 3.401878] i2c /dev entries driver
[ 3.572831] w83627hf: Found W83697HF chip at 0x290
[ 3.572831] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[ 3.572831] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[ 3.572831] w83627hf/thf/hg WDT: initialized. timeout=60 sec (nowayout=0)
More information about the lm-sensors
mailing list