[lm-sensors] abituguru3: Please send .. to the abituguru3 (see MAINTAINERS)

[Justin Piszcz]

On Sun, 19 Oct 2008, Alistair John Strachan wrote:

> On Sunday 19 October 2008 17:54:15 Justin Piszcz wrote:
>> Kernel: 2.6.27.2:
>> [   10.242065] abituguru3: found Abit uGuru3, motherboard ID: 0016
>> [   10.242105] abituguru3: this motherboard was not detected using DMI.
>> Please send the output of "dmidecode" to the abituguru3 maintainer(see
>> MAINTAINERS)
>>
>> Motherboard: AW9D-MAX as shown below.
>>
>> DMI Decode:
> [snip]
>>  	Product Name: AW9D-MAX       (Intel i975-ICH7)
>
> The spaces are a somewhat worrying (Abit haven't done this on other boards I
> have DMI information for), but assuming they're constant through all BIOS
> revisions the attached patch should be safe.
>
> (In the longer term it might be safer to only match the board product name,
> and ignore the chipset information. I'll do this if the need arises.)
>
> Please test the attached patch. I'll resubmit a cleaned up version if you can
> verify that the kernel message disappears and your sensors still work.
>
> -- 
> Cheers,
> Alistair.
>

Against 2.6.27.2:

# patch -p1 < /home/war/aw9d-max-dmi-detection.diff
patching file drivers/hwmon/abituguru3.c

Reboot, dmesg:

[   10.247075] abituguru3: found Abit uGuru3, motherboard ID: 0016

Success.. and the sensors continue to work, btw the colon is off in one of 
the sensors (display artifact), not related to this patch/etc, just FYI:

abituguru3-isa-00e0
Adapter: ISA adapter
CPU Core:          +1.23 V  (min =  +0.00 V, max =  +1.60 V)
DDR2:              +2.00 V  (min =  +1.60 V, max =  +2.40 V)
DDR2 VTT:          +1.01 V  (min =  +0.80 V, max =  +1.20 V)
CPU VTT 1.2V:      +1.22 V  (min =  +0.95 V, max =  +1.45 V)
MCH & PCIE 1.5V:   +1.50 V  (min =  +1.20 V, max =  +1.80 V)
MCH 2.5V:          +2.58 V  (min =  +2.00 V, max =  +3.00 V)
ICH 1.05V:         +1.04 V  (min =  +0.85 V, max =  +1.25 V)
ATX +12V (24-Pin):+12.18 V  (min =  +9.60 V, max = +14.40 V)
ATX +12V (4-pin): +12.24 V  (min =  +9.60 V, max = +14.40 V)
ATX +5V:           +5.07 V  (min =  +3.99 V, max =  +6.00 V)
+3.3V:             +3.38 V  (min =  +2.64 V, max =  +3.94 V)
5VSB:              +5.10 V  (min =  +3.99 V, max =  +6.00 V)
CPU Fan:          1380 RPM  (min =  300 RPM)
NB Fan:              0 RPM  (min =  300 RPM)
SYS Fan:             0 RPM  (min =  300 RPM)
AUX1 Fan:            0 RPM  (min =  300 RPM)
AUX2 Fan:            0 RPM  (min =  300 RPM)
AUX3 Fan:            0 RPM  (min =  300 RPM)
OTES1 Fan:           0 RPM  (min =  300 RPM)
CPU:               +37.0°C  (high = +75.0°C, crit = +85.0°C) 
System :           +35.0°C  (high = +55.0°C, crit = +65.0°C)
       ^^^ (artifact)
PWM1:              +37.0°C  (high = +80.0°C, crit = +90.0°C) 
PWM2:              +39.0°C  (high = +80.0°C, crit = +90.0°C) 
PWM3:              +41.0°C  (high = +80.0°C, crit = +90.0°C) 
PWM4:              +36.0°C  (high = +80.0°C, crit = +90.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +46.0°C  (high = +80.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +48.0°C  (high = +80.0°C, crit = +100.0°C)

There should be another fan running as well, will have to check that 
later, but the rest of the sensors look normal.

Thank you,

Justin.