[lm-sensors] lm_sensors problem

Hubert Kario hka at qbs.com.pl
Sun Aug 30 16:02:02 CEST 2009


On Saturday 29 August 2009 18:46:35 ponto wrote:
> i've used sensors-detect and it gave me:
>
> Now follows a summary of the probes I have just done.
> Just press ENTER to continue:
>
> Driver `coretemp':
>  * Chip `Intel Core family thermal sensor' (confidence: 9)
>
> Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):
> Copy prog/init/lm_sensors.init to /etc/rc.d/lm_sensors
> for initialization at boot time.
> You should now start the lm_sensors service to load the required
> kernel modules.
>
> and sensors started to give me:
>
> sensors
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0:      +56.0°C  (high = +100.0°C, crit = +100.0°C)
>
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1:      +60.0°C  (high = +100.0°C, crit = +100.0°C)
>
> acpitz-virtual-0
> Adapter: Virtual device
> temp1:       +60.0°C  (crit = +94.0°C)
>
> was not suppose to give the fan's rpm's and so and so?
Only if modules that can report such information are loaded.

coretemp module reports only temperature inside Intel Core processors

full transcript of sensors-detect run would be helpful
>
>
> oh, pwmconfig does outputs me this:
> pwmconfig
> # pwmconfig revision 5630 (2009-01-29)
> This program will search your sensors for pulse width modulation (pwm)
> controls, and test each one to see if it controls a fan on
> your motherboard. Note that many motherboards do not have pwm
> circuitry installed, even if your sensor chip supports pwm.
>
> We will attempt to briefly stop each fan using the pwm controls.
> The program will attempt to restore each fan to full speed
> after testing. However, it is ** very important ** that you
> physically verify that the fans have been to full speed
> after the program has completed.
>
> /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
>
> as this have to do with the supose missing values on lm sensors?
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors at lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
-- 
Hubert Kario
QBS - Quality Business Software
02-656 Warszawa, ul. Ksawerów 30/85
tel. +48 (22) 646-61-51, 646-74-24
www.qbs.com.pl

System Zarządzania Jakością
zgodny z normą ISO 9001:2000




More information about the lm-sensors mailing list