[lm-sensors] VID on Intel Core Duo

Maneki Neko manekineko at gmail.com
Sun Jun 14 06:36:11 CEST 2009


I'm trying to obtain the VID on an HP notebook with a Core Duo CPU.  Under
Windows, I could see the voltage, speed, temperature, etc. but with
lm-sensors all I'm able to see is the temperature.

I have run sensors-detect to no avail.  Can anyone provide any advice to me
on how to get this working?  Thanks for your time and help!

Here is the output from sensors-detect:

# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
>
> This program will help you determine which kernel modules you need
> to load to use lm_sensors most effectively. It is generally safe
> and recommended to accept the default answers to all questions,
> unless you know what you're doing.
>
> We can start with probing for (PCI) I2C or SMBus adapters.
> Do you want to probe now? (YES/no): yes
> Probing for PCI bus adapters...
> Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
>
> We will now try to load each adapter module in turn.
> Load `i2c-i801' (say NO if built into your kernel)? (YES/no): yes
> Module loaded successfully.
> If you have undetectable or unsupported I2C/SMBus adapters, you can have
> them scanned by manually loading the modules before running this script.
>
> To continue, we need module `i2c-dev' to be loaded.
> Do you want to load `i2c-dev' now? (YES/no): yes
> Module loaded successfully.
>
> We are now going to do the I2C/SMBus adapter probings. Some chips may
> be double detected; we choose the one with the highest confidence
> value in that case.
> If you found that the adapter hung after probing a certain address,
> you can specify that address to remain unprobed.
>
> Next adapter: SMBus I801 adapter at 18e0 (i2c-0)
> Do you want to scan it? (YES/no/selectively): yes
> Client found at address 0x50
> Probing for `Analog Devices ADM1033'...                     No
> Probing for `Analog Devices ADM1034'...                     No
> Probing for `SPD EEPROM'...                                 Yes
>     (confidence 8, not a hardware monitoring chip)
> Probing for `EDID EEPROM'...                                No
>
> Some chips are also accessible through the ISA I/O ports. We have to
> write to arbitrary I/O ports to probe them. This is usually safe though.
> Yes, you do have ISA I/O ports even if you do not have any ISA slots!
> Do you want to scan the ISA I/O ports? (YES/no): yes
> Probing for `National Semiconductor LM78' at 0x290...       No
> Probing for `National Semiconductor LM78-J' at 0x290...     No
> Probing for `National Semiconductor LM79' at 0x290...       No
> Probing for `Winbond W83781D' at 0x290...                   No
> Probing for `Winbond W83782D' at 0x290...                   No
> Probing for `IPMI BMC KCS' at 0xca0...                      No
> Probing for `IPMI BMC SMIC' at 0xca8...                     No
>
> Some Super I/O chips may also contain sensors. We have to write to
> standard I/O ports to probe them. This is usually safe.
> Do you want to scan for Super I/O sensors? (YES/no): yes
> Probing for Super-I/O at 0x2e/0x2f
> Trying family `National Semiconductor'...                   No
> Trying family `SMSC'...                                     No
> Trying family `VIA/Winbond/Fintek'...                       No
> Trying family `ITE'...                                      No
> Probing for Super-I/O at 0x4e/0x4f
> Trying family `National Semiconductor'...                   No
> Trying family `SMSC'...                                     No
> Trying family `VIA/Winbond/Fintek'...                       No
> Trying family `ITE'...                                      No
>
> Some south bridges, CPUs or memory controllers may also contain
> embedded sensors. Do you want to scan for them? (YES/no): yes
> Silicon Integrated Systems SIS5595...                       No
> VIA VT82C686 Integrated Sensors...                          No
> VIA VT8231 Integrated Sensors...                            No
> AMD K8 thermal sensors...                                   No
> AMD K10 thermal sensors...                                  No
> Intel Core family thermal sensor...                         Success!
>     (driver `coretemp')
> Intel AMB FB-DIMM thermal sensor...                         No
>
> Now follows a summary of the probes I have just done.
> Just press ENTER to continue:
>
> Driver `coretemp' (should be inserted):
>   Detects correctly:
>   * Chip `Intel Core family thermal sensor' (confidence: 9)
>
> I will now generate the commands needed to load the required modules.
> Just press ENTER to continue:
>
> To load everything that is needed, add this to /etc/modules:
>
> #----cut here----
> # Chip drivers
> coretemp
> #----cut here----
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090614/65ffb367/attachment.html>


More information about the lm-sensors mailing list