[lm-sensors] Problems with DG45ID sensors

[Igor Santos]

Hello,

I've been asking for help at superuser.com, but nobody could help me.
I've tried the last version of sensors-detect script, but it just gives me
the same modules to load up...

This is my computer:
Intel Core2duo e4700
Motherboard Intel DG45ID
GeForce 9800 GT
2 HD's, one SATA and one PATA with adapter

It tolds me to load i2c-i801, lm85 and coretemp modules. And so I did.

I can see properly my Videocard temp (I think it's provided by nvidia,
right?) and both HD (but sometimes the IDE disk simply goes 0°). My CPU
temps looks correct too.

But all the temps from my motherboard are zeroed.
Take a look at the full output:

igoru[~]$ sensors
> lm85-i2c-0-2e
> Adapter: SMBus I801 adapter at e000
> V1.5: +0.00 V (min = +0.00 V, max = +3.32 V)
> VCore: +0.00 V (min = +0.00 V, max = +2.99 V)
> V3.3: +0.00 V (min = +0.00 V, max = +4.38 V)
> V5: +0.00 V (min = +0.00 V, max = +6.64 V)
> V12: +0.00 V (min = +0.00 V, max = +15.94 V)
> CPU_Fan: 0 RPM (min = 0 RPM) ALARM
> fan2: 0 RPM (min = 0 RPM) ALARM
> fan3: 0 RPM (min = 0 RPM) ALARM
> fan4: 0 RPM (min = 0 RPM) ALARM
> CPU Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
> Board Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
> Remote Temp: +0.0°C (low = -127.0°C, high = +127.0°C)
> cpu0_vid: +2.050 V
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0: +57.0°C (high = +78.0°C, crit = +100.0°C)
>
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1: +57.0°C (high = +78.0°C, crit = +100.0°C)
>


What should I do?


Thank you in advance,

Igor Santos
  Programador Web
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090910/add98534/attachment.html