[lm-sensors] Intel DQ45CB motherboard - zero stats

[Jean Delvare]

On Sat, 12 Sep 2009 12:15:33 +0300, Stefan Catruna wrote:
> Here are 2 consecutise "sensors" run:
> 
> # sensors
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0:      +73.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM
> 
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1:      +68.0°C  (high = +74.0°C, crit = +100.0°C)
> 
> coretemp-isa-0002
> Adapter: ISA adapter
> Core 2:      +69.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM
> 
> coretemp-isa-0003
> Adapter: ISA adapter
> Core 3:      +71.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM
> 
> # sensors
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0:      +72.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM
> 
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1:      +67.0°C  (high = +74.0°C, crit = +100.0°C)
> 
> coretemp-isa-0002
> Adapter: ISA adapter
> Core 2:      +67.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM
> 
> coretemp-isa-0003
> Adapter: ISA adapter
> Core 3:      +70.0°C  (high = +74.0°C, crit = +100.0°C)  ALARM

This is odd. Rudolf, do you know why alarm flags are set while
temperatures are below the high limits?

> PS: lm-sensors was installed from repository
> # sensors -v
> sensors version 3.0.2 with libsensors version 3.0.2

Kernel version is useful as well.

> PPS: I'm having some problems with the temperature, it reached even 100

Not good. Maybe your fans aren't spinning fast enough? If you are doing
fan speed control, try without it for a moment.

-- 
Jean Delvare
http://khali.linux-fr.org/wishlist.html