[lm-sensors] reformat: [PATCH] hwmon: Driver for Andigilog aSC7621 family monitoring chips
Jaswinder Singh Rajput
jaswinder at kernel.org
Mon Feb 22 11:52:15 CET 2010
Hello,
I am sorry. I was preparing the email and accidentally I send this
email. Please ignore it. I will send another email. Sorry for noise.
Thanks,
--
JSR
On Mon, 2010-02-22 at 16:15 +0530, Jaswinder Singh Rajput wrote:
> On Sun, 2010-02-21 at 23:29 -0700, George Joseph wrote:
> > Fixed word wrap this time (I hope)...
>
> Yes, this applies cleanly thanks.
>
> I have compared the sensors output of Intel WX58BP with its BIOS
> hardware monitoring.
>
> http://userweb.kernel.org/~jaswinder/Corei7/sensors_Intel_WX58P.txt :
>
> asc7621a-i2c-0-2e
> Adapter: SMBus I801 adapter at 2000
> in0: +1.08 V (min = +0.00 V, max = +3.31 V)
> in1: +0.92 V (min = +0.00 V, max = +2.99 V)
> in2: +3.19 V (min = +0.00 V, max = +4.36 V)
> in3: +4.99 V (min = +0.00 V, max = +6.61 V)
> in4: +12.00 V (min = +0.00 V, max = +15.94 V)
> fan1: 949 RPM (min = 0 RPM)
> fan2: 2437 RPM (min = 0 RPM)
> fan3: 0 RPM (min = 0 RPM)
> fan4: 623 RPM (min = 0 RPM)
> temp1: -57.5°C (low = -127.0°C, high = +0.0°C)
> (crit = -17.0°C)
> temp2: +35.8°C (low = -127.0°C, high = +127.0°C)
> (crit = +65.0°C)
> temp3: +42.5°C (low = -127.0°C, high = +127.0°C)
> (crit = +65.0°C)
> temp4: +52.5°C (low = -127.0°C, high = +127.0°C)
> (crit = +103.0°C)
> temp5: -57.5°C
> temp6: -84.5°C
> temp7: +96.2°C
> temp8: +118.5°C
>
>
> BIOS hardware monitoring :
>
> Processor Fan speed: 949 RPM (which is same as fan1)
> Aux Fan speed: 2437 RPM (which is same as fan2)
> Front Fan speed: 0 (which is same as fan3)
> Rear Fan speed: 623 RPM (which is same as fan4)
>
> Processor Thermal Margin: 57 C (which is same as temp1 but without -ve)
> IOH Temperature: 52 C (which is same as temp4)
> Motherboard Ambient Temperature: 35 C (which is same as temp2)
> Voltage Regulator Temperature: 42C (which is same as temp3)
>
> V12.0 : 12.00 V (which is same as in4)
> V12.0 : 12.00 V (which is same as in4)
> V12.0 : 12.00 V (which is same as in4)
> V12.0 : 12.00 V (which is same as in4)
>
> I am CC Andrew, Ingo, Stephen and LKML. I hope we can also get reviews
> and feedbacks from them.
>
> Thanks,
> --
> Jaswinder Singh.
>
More information about the lm-sensors
mailing list