[lm-sensors] ATK0110 on older Asus board

Karl Newman siliconfiend at gmail.com
Thu Jan 14 17:12:33 CET 2010


On Thu, Jan 14, 2010 at 7:19 AM, Jean Delvare <khali at linux-fr.org> wrote:

> Hi Karl,
>
> On Thu, 14 Jan 2010 06:56:34 -0800, Karl Newman wrote:
> > I have a 4-year-old Asus A8N-VM CSM motherboard, which has a W83627EHG
> chip
> > for hardware monitoring. I recently upgraded to kernel 2.6.31 and ran
> into
> > the "Device or Resource busy" error when trying to load my existing
> > w83627ehf module. After some research, I discovered that I should use the
> > asus_atk0110 module instead. So, I updated my kernel config to build that
> > module and it will load with no problem, but "sensors" is ignoring it.
> When
> > I modprobe the module, it silently succeeds (it's listed in lsmod) but
> there
> > are no messages in dmesg or the syslog to indicate any activity from the
> > module, which makes me suspect that my board is not currently supported
> by
> > this module. I did confirm that it has the atk0110 chip (ls
> > /sys/bus/acpi/devices shows a ATK0110:00 entry). Am I doing something
> wrong,
> > or do you need a DSDT dump to support my motherboard, or...?
>
> Which version of lm-sensors are you running? "sensors -v" will tell
> you. Minimum version for asus_atk0110 support is 3.1.0, as documented
> on:
>  http://www.lm-sensors.org/wiki/Devices
>
> --
> Jean Delvare
> http://khali.linux-fr.org/wishlist.html
>

Sorry, I forgot to mention that. I'm using 3.1.1 (sensors version 3.1.1 with
libsensors version 3.1.1), on Gentoo, along with kernel 2.6.31-gentoo-r6.

Karl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20100114/4a1005b7/attachment.html>


More information about the lm-sensors mailing list