[lm-sensors] [PATCH] sensors-detect: Add support for NCT6775F and SE97

Jean Delvare khali at linux-fr.org
Wed Jul 7 13:40:57 CEST 2010


Hi Guenter,

On Tue, 6 Jul 2010 15:24:37 -0700, Guenter Roeck wrote:
> The following patch adds support for SE97 to sensors-detect.
> It also displays the new chip names for W83677HG-I (NCT677xF).
> 
> ---
> Index: prog/detect/sensors-detect
> ===================================================================
> --- prog/detect/sensors-detect	(revision 5850)
> +++ prog/detect/sensors-detect	(working copy)
> @@ -1190,6 +1190,11 @@ use vars qw(@i2c_adapter_names);
>  		i2c_addrs => [0x18..0x1f],
>  		i2c_detect => sub { jedec_JC42_4_detect(@_, 0); },
>  	}, {
> +		name => "NXP SE97/SE97B",
> +		driver => "to-be-written",
> +		i2c_addrs => [0x18..0x1f],
> +		i2c_detect => sub { jedec_JC42_4_detect(@_, 1); },
> +	}, {
>  		name => "Smart Battery",
>  		driver => "sbs", # ACPI driver, not sure if it always works
>  		i2c_addrs => [0x0b],
> @@ -1730,7 +1735,7 @@ use constant FEAT_SMBUS	=> (1 << 7);
>  		logdev => 0x0b,
>  		features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
>  	}, {
> -		name => "Nuvoton W83677HG-I Super IO Sensors",
> +		name => "Nuvoton W83677HG-I (NCT6771F/NCT6772F/NCT6775F) Super IO Sensors",
>  		driver => "to-be-written",	# Probably w83627ehf
>  		devid => 0xB470,
>  		devid_mask => 0xFFF0,
> @@ -5309,7 +5314,7 @@ sub max6655_detect
>  	return 6;
>  }
>  
> -# Chip to detect: 0 = STTS424
> +# Chip to detect: 0 = STTS424, 1 = SE97/SE97B
>  # Registers used:
>  #   0x00: Capabilities
>  #   0x01: Configuration
> @@ -5332,9 +5337,13 @@ sub jedec_JC42_4_detect
>  	# Check for manufacturer and device ID
>  	$manid = i2c_smbus_read_byte_data($file, 0x06);
>  	$devid = i2c_smbus_read_byte_data($file, 0x07);
> +
>  	if ($chip == 0) {
>  		return unless $manid == 0x10;		# STMicrolectronics
>  		return unless $devid == 0x00;		# STTS424
> +	} elsif ($chip == 1) {
> +		return unless $manid == 0x11;		# NXP
> +		return unless $devid == 0xa2;		# SE97
>  	}
>  
>  	# Now, do it all again with words. Note that we get
> @@ -5342,7 +5351,7 @@ sub jedec_JC42_4_detect
>  
>  	# Check for unused bits
>  	$reg = i2c_smbus_read_word_data($file, 0x00);
> -	return if $reg < 0 || $reg & 0xc0ff;
> +	return if $reg < 0 || $reg & 0x00ff;
>  
>  	$manid = i2c_smbus_read_word_data($file, 0x06);
>  	$devid = i2c_smbus_read_word_data($file, 0x07);
> @@ -5350,6 +5359,9 @@ sub jedec_JC42_4_detect
>  	if ($chip == 0) {
>  		return unless $manid == 0x4a10;		# STMicrolectronics
>  		return unless ($devid & 0xfeff) == 0x0000; # STTS424
> +	} elsif ($chip == 1) {
> +		return unless $manid == 0x3111;		# NXP
> +		return unless ($devid & 0xfcff) == 0x00a2; # SE97
>  	}
>  
>  	return 5;
> Index: CHANGES
> ===================================================================
> --- CHANGES	(revision 5850)
> +++ CHANGES	(working copy)
> @@ -18,6 +18,8 @@ SVN HEAD
>                    Fix Maxim MAX6690 support
>                    Fix handling of duplicate detections
>                    Add support for STMicroelectronics STTS424
> +                  Add support for NXP SE97 / SE97B
> +                  Add reference to NCT6771F/NCT6772F/NCT6775F
>  
>  3.1.2 (2010-02-02)
>    libsensors: Support upcoming sysfs path to i2c adapters

Looks all sane, thanks for doing this. Shall I commit it, or should I
create a developer account and let you commit it? You already have an
account for the wiki, letting you commit to the repository is only one
configuration line away. So it's as you prefer.

-- 
Jean Delvare




More information about the lm-sensors mailing list