[lm-sensors] R: Re: R: Re: R: Re: R: Re: sensors not found INTEL i7

didy45 at libero.it didy45 at libero.it
Tue Mar 16 14:31:50 CET 2010


yes.

>----Messaggio originale----
>Da: anothersname at googlemail.com
>Data: 16/03/2010 13.36
>A: "didy45 at libero.it"<didy45 at libero.it>
>Ogg: Re: [lm-sensors] R: Re: R: Re: R: Re: sensors not found INTEL i7
>
>On 16 March 2010 11:22, didy45 at libero.it <didy45 at libero.it> wrote:
>> I write that you say but when i digit:
>> fabio at fabio-laptop:~/lm-sensors/prog/detect$ sensors
>> No sensors found!
>> Make sure you loaded all the kernel drivers you need.
>> Try sensors-detect to find out which these are.
>>
>> and....
>>
>> fabio at fabio-laptop:~/lm-sensors/prog/detect$ sudo ./sensors-detect
>> # sensors-detect revision 5825 (2010-02-19 13:23:31 +0100)
>> # System: Hewlett-Packard HP Pavilion dv6 Notebook PC (laptop)
>> # Board: Hewlett-Packard 3659
>>
>> This program will help you determine which kernel modules you need
>> to load to use lm_sensors most effectively. It is generally safe
>> and recommended to accept the default answers to all questions,
>> unless you know what you're doing.
>>
>> Some south bridges, CPUs or memory controllers contain embedded sensors.
>> Do you want to scan for them? This is totally safe. (YES/no): YES
>> Silicon Integrated Systems SIS5595...                       No
>> VIA VT82C686 Integrated Sensors...                          No
>> VIA VT8231 Integrated Sensors...                            No
>> AMD K8 thermal sensors...                                   No
>> AMD Family 10h thermal sensors...                           No
>> AMD Family 11h thermal sensors...                           No
>> Intel Core family thermal sensor...                         Success!
>>    (driver `coretemp')
>> Intel Atom thermal sensor...                                No
>> Intel AMB FB-DIMM thermal sensor...                         No
>> VIA C7 thermal sensor...                                    No
>> VIA Nano thermal sensor...                                  No
>>
>> Some Super I/O chips contain embedded sensors. We have to write to
>> standard I/O ports to probe them. This is usually safe.
>> Do you want to scan for Super I/O sensors? (YES/no): YES
>> Probing for Super-I/O at 0x2e/0x2f
>> Trying family `National Semiconductor'...                   No
>> Trying family `SMSC'...                                     No
>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>> Trying family `ITE'...                                      No
>> Probing for Super-I/O at 0x4e/0x4f
>> Trying family `National Semiconductor'...                   No
>> Trying family `SMSC'...                                     No
>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>> Trying family `ITE'...                                      No
>>
>> Some hardware monitoring chips are accessible through the ISA I/O ports.
>> We have to write to arbitrary I/O ports to probe them. This is usually
>> safe though. Yes, you do have ISA I/O ports even if you do not have any
>> ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
>> Probing for `National Semiconductor LM78' at 0x290...       No
>> Probing for `National Semiconductor LM79' at 0x290...       No
>> Probing for `Winbond W83781D' at 0x290...                   No
>> Probing for `Winbond W83782D' at 0x290...                   No
>>
>> Lastly, we can probe the I2C/SMBus adapters for connected hardware
>> monitoring devices. This is the most risky part, and while it works
>> reasonably well on most systems, it has been reported to cause trouble
>> on some systems.
>> Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
>> Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH)
>> WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be
>> ignored in a future release.
>> WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be
>> ignored in a future release.
>> Module i2c-i801 loaded successfully.
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-0)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-1)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-2)
>> Do you want to scan it? (YES/no/selectively): YES
>> Client found at address 0x50
>> Probing for `Analog Devices ADM1033'...                     No
>> Probing for `Analog Devices ADM1034'...                     No
>> Probing for `SPD EEPROM'...                                 No
>> Probing for `EDID EEPROM'...                                Yes
>>    (confidence 8, not a hardware monitoring chip)
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-3)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-4)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-5)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-6)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Next adapter: NVIDIA i2c adapter  (i2c-7)
>> Do you want to scan it? (YES/no/selectively): YES
>>
>> Now follows a summary of the probes I have just done.
>> Just press ENTER to continue:
>>
>> Driver `coretemp':
>>  * Chip `Intel Core family thermal sensor' (confidence: 9)
>>
>> Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): YES
>> insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
>> insserv: warning: script 'S47lm-sensors' missing LSB tags and overrides
>> insserv: warning: script 'lm_sensors' missing LSB tags and overrides
>> insserv: warning: script 'anacron' missing LSB tags and overrides
>> insserv: warning: script 'cron' missing LSB tags and overrides
>> insserv: warning: script 'apport' missing LSB tags and overrides
>> insserv: warning: script 'udev-finish' missing LSB tags and overrides
>> insserv: warning: script 'gdm' missing LSB tags and overrides
>> insserv: warning: script 'usplash' missing LSB tags and overrides
>> insserv: warning: script 'dmesg' missing LSB tags and overrides
>> insserv: warning: script 'module-init-tools' missing LSB tags and overrides
>> insserv: warning: script 'lm-sensors' missing LSB tags and overrides
>> insserv: warning: script 'failsafe-x' missing LSB tags and overrides
>> insserv: warning: script 'udevmonitor' missing LSB tags and overrides
>> insserv: warning: script 'avahi-daemon' missing LSB tags and overrides
>> insserv: warning: script 'acpid' missing LSB tags and overrides
>> insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh'
>> overwrites defaults (empty).
>> insserv: warning: script 'ufw' missing LSB tags and overrides
>> insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown'
>> overwrites defaults (empty).
>> insserv: warning: current start runlevel(s) (0 6) of script `networking'
>> overwrites defaults (empty).
>> insserv: warning: current start runlevel(s) (0 6) of script `umountfs'
>> overwrites defaults (empty).
>> insserv: warning: script 'dbus' missing LSB tags and overrides
>> insserv: warning: script 'rsyslog' missing LSB tags and overrides
>> insserv: warning: script 'hal' missing LSB tags and overrides
>> insserv: warning: current start runlevel(s) (0 6) of script `sendsigs'
>> overwrites defaults (empty).
>> insserv: warning: script 'procps' missing LSB tags and overrides
>> insserv: warning: script 'hwclock' missing LSB tags and overrides
>> insserv: warning: script 'udev' missing LSB tags and overrides
>> insserv: warning: script 'rsyslog-kmsg' missing LSB tags and overrides
>> insserv: warning: script 'atd' missing LSB tags and overrides
>> insserv: warning: current start runlevel(s) (0 6) of script `umountroot'
>> overwrites defaults (empty).
>> insserv: warning: script 'hwclock-save' missing LSB tags and overrides
>> insserv: warning: script 'udevtrigger' missing LSB tags and overrides
>> insserv: warning: current start runlevel(s) (6) of script `reboot' 
overwrites
>> defaults (empty).
>> insserv: warning: current start runlevel(s) (0) of script `halt' overwrites
>> defaults (empty).
>> insserv: warning: script 'acpi-support' missing LSB tags and overrides
>> insserv: There is a loop between service rsyslog and pulseaudio if stopped
>> insserv:  loop involving service pulseaudio at depth 3
>> insserv:  loop involving service rsyslog at depth 2
>> insserv:  loop involving service udev at depth 1
>> insserv: There is a loop between service pulseaudio and rsyslog if stopped
>> insserv: exiting without changing boot order!
>> Unloading i2c-i801... OK
>>
>> What do i do??????
>>
>>>----Messaggio originale----
>>>Da: anothersname at googlemail.com
>>>Data: 15/03/2010 18.37
>>>A: "didy45 at libero.it"<didy45 at libero.it>
>>>Ogg: Re: [lm-sensors] R: Re: R: Re: sensors not found INTEL i7
>>>
>>>On 15 March 2010 14:00, didy45 at libero.it <didy45 at libero.it> wrote:
>>>> My ubuntu is:
>>>> Ubuntu 9.10 - Karmic Koala
>>>>
>>>> My kernel version is:
>>>> 2.6.31-20-generic
>>>>
>>>>
>>>>>----Messaggio originale----
>>>>>Da: anothersname at googlemail.com
>>>>>Data: 15/03/2010 12.26
>>>>>A: "didy45 at libero.it"<didy45 at libero.it>
>>>>>Ogg: Re: [lm-sensors] R: Re: sensors not found INTEL i7
>>>>>
>>>>>On 15 March 2010 10:29, didy45 at libero.it <didy45 at libero.it> wrote:
>>>>>> This is the answer to sensor -s and sensors-detect:
>>>>>>
>>>>>> fabio at fabio-laptop:~$ sensors -s
>>>>>> No sensors found!
>>>>>> Make sure you loaded all the kernel drivers you need.
>>>>>> Try sensors-detect to find out which these are.
>>>>>>
>>>>>> fabio at fabio-laptop:~$ sudo sensors-detect
>>>>>> [sudo] password for fabio:
>>>>>> # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
>>>>>> # System: Hewlett-Packard HP Pavilion dv6 Notebook PC (laptop)
>>>>>> # Board: Hewlett-Packard 3659
>>>>>>
>>>>>> This program will help you determine which kernel modules you need
>>>>>> to load to use lm_sensors most effectively. It is generally safe
>>>>>> and recommended to accept the default answers to all questions,
>>>>>> unless you know what you're doing.
>>>>>>
>>>>>> Some south bridges, CPUs or memory controllers contain embedded 
sensors.
>>>>>> Do you want to scan for them? This is totally safe. (YES/no): YES
>>>>>> Silicon Integrated Systems SIS5595...                       No
>>>>>> VIA VT82C686 Integrated Sensors...                          No
>>>>>> VIA VT8231 Integrated Sensors...                            No
>>>>>> AMD K8 thermal sensors...                                   No
>>>>>> AMD Family 10h thermal sensors...                           No
>>>>>> AMD Family 11h thermal sensors...                           No
>>>>>> Intel Core family thermal sensor...                         No
>>>>>> Intel Atom thermal sensor...                                No
>>>>>> Intel AMB FB-DIMM thermal sensor...                         No
>>>>>> VIA C7 thermal sensor...                                    No
>>>>>> VIA Nano thermal sensor...                                  No
>>>>>>
>>>>>> Some Super I/O chips contain embedded sensors. We have to write to
>>>>>> standard I/O ports to probe them. This is usually safe.
>>>>>> Do you want to scan for Super I/O sensors? (YES/no): YES
>>>>>> Probing for Super-I/O at 0x2e/0x2f
>>>>>> Trying family `National Semiconductor'...                   No
>>>>>> Trying family `SMSC'...                                     No
>>>>>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>>>>>> Trying family `ITE'...                                      No
>>>>>> Probing for Super-I/O at 0x4e/0x4f
>>>>>> Trying family `National Semiconductor'...                   No
>>>>>> Trying family `SMSC'...                                     No
>>>>>> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
>>>>>> Trying family `ITE'...                                      No
>>>>>>
>>>>>> Some hardware monitoring chips are accessible through the ISA I/O 
ports.
>>>>>> We have to write to arbitrary I/O ports to probe them. This is usually
>>>>>> safe though. Yes, you do have ISA I/O ports even if you do not have any
>>>>>> ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
>>>>>> Probing for `National Semiconductor LM78' at 0x290...       No
>>>>>> Probing for `National Semiconductor LM79' at 0x290...       No
>>>>>> Probing for `Winbond W83781D' at 0x290...                   No
>>>>>> Probing for `Winbond W83782D' at 0x290...                   No
>>>>>>
>>>>>> Lastly, we can probe the I2C/SMBus adapters for connected hardware
>>>>>> monitoring devices. This is the most risky part, and while it works
>>>>>> reasonably well on most systems, it has been reported to cause trouble
>>>>>> on some systems.
>>>>>> Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
>>>>>> Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.
>>>>>> Sorry, no supported PCI bus adapters found.
>>>>>> WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be
>>>>>> ignored in a future release.
>>>>>> WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it 
will
>> be
>>>>>> ignored in a future release.
>>>>>> Module i2c-dev loaded successfully.
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-0)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-1)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-2)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>> Client found at address 0x50
>>>>>> Probing for `Analog Devices ADM1033'...                     No
>>>>>> Probing for `Analog Devices ADM1034'...                     No
>>>>>> Probing for `SPD EEPROM'...                                 No
>>>>>> Probing for `EDID EEPROM'...                                Yes
>>>>>>    (confidence 8, not a hardware monitoring chip)
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-3)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-4)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-5)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-6)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Next adapter: NVIDIA i2c adapter  (i2c-7)
>>>>>> Do you want to scan it? (YES/no/selectively): YES
>>>>>>
>>>>>> Sorry, no sensors were detected.
>>>>>> This is relatively common on laptops, where thermal management is
>>>>>> handled by ACPI rather than the OS.
>>>>>>
>>>>>> What do i do?
>>>>>> Help me, please!
>>>>>>
>>>>>>
>>>>>>>----Messaggio originale----
>>>>>>>Da: anothersname at googlemail.com
>>>>>>>Data: 15/03/2010 3.36
>>>>>>>A: "didy45 at libero.it"<didy45 at libero.it>
>>>>>>>Ogg: Re: [lm-sensors] sensors not found INTEL i7
>>>>>>>
>>>>>>>On 14 March 2010 16:09, didy45 at libero.it <didy45 at libero.it> wrote:
>>>>>>>> Do not function lm-sensors on hp pavillon dv6 2153el
>>>>>>>> with cpu intel i7.
>>>>>>>> After i install lmsensors and i start the sensors.
>>>>>>>> the answer is
>>>>>>>> no sensors found!
>>>>>>>> What do i do?
>>>>>>>> Can you help me?
>>>>>>>> thanks!
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> lm-sensors mailing list
>>>>>>>> lm-sensors at lm-sensors.org
>>>>>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>>>>>>
>>>>>>>
>>>>>>>Did you run sensors-detect?
>>>>>>>
>>>>>>>What did it report?
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> lm-sensors mailing list
>>>>>> lm-sensors at lm-sensors.org
>>>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>>>>
>>>>>
>>>>>Which version of the Kernel are you using?
>>>>>
>>>>>Which flavour of Linux?
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> lm-sensors mailing list
>>>> lm-sensors at lm-sensors.org
>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>
>>>OK
>>>
>>>I'm not familiar with Ubuntu's file layout.....
>>>
>>>You should have a file lm_sensors probably in /etc/sysconfig
>>>
>>>In that file add the following 2 lines
>>>
>>>---------------------------
>>>
>>>HWMON_MODULES="coretemp"
>>>
>>>MODULE_0=coretemp
>>>
>>>-----------------------------
>>>
>>>Once you've done that restart your lm_sensors service and let me know
>>>what happens
>>>
>>
>>
>>
>> _______________________________________________
>> lm-sensors mailing list
>> lm-sensors at lm-sensors.org
>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
>Are you running sensors detect as root?
>






More information about the lm-sensors mailing list