[lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors

Wan, Huaxu huaxu.wan at intel.com
Tue May 18 07:07:20 CEST 2010


Hi,

The TjMax of N270 is 90C, according the official documents [1][2].

.
[1]http://ark.intel.com/Product.aspx?id=36331&processor=N270&spec-codes=SLB73
[2]http://download.intel.com/design/processor/datashts/319977.pdf

Thanks
Huaxu

________________________________
From: Dmitry Gromov [mailto:gromovd at gmail.com]
Sent: Tuesday, May 18, 2010 12:48 PM
To: Carsten Emde
Cc: Andrew Morton; LKML; LM Sensors; Wan, Huaxu
Subject: Re: [lm-sensors] [PATCH 0/2] hwmon: Update coretemp to current Intel processors

Hi!

On Mon, May 17, 2010 at 05:41, Carsten Emde <C.Emde at osadl.org<mailto:C.Emde at osadl.org>> wrote:
Hi!

Here comes the current version of the coretemp patches. Huaxu did the initial
work; Jean suggested to submit them directly to Andrew.

I made some style changes as advised by checkpatch.

The patches have been tested successfully on Core 2 Duo and Quad, and on
Nehalem and Nehalem/Westmere where temperature readings were plausible and
changed with load as expected. When tested on an Atom processor (N270), the
temperature values were identical to previous versions of the coretemp
module and also changed with load. However, the readings should be higher
by 10 to 15C as compared to the outside temperature of the processor. Huaxu,
could you check? I would guess TjMax to be 105 instead of 90C in these
processors.


I apologize, if I ask a stupid question, but are you saying that TjMax in coretemp.c should be set to higher value than Tcase-max value specified in Intel documents?

Thanks!

--
DG
NJ

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20100518/58c13296/attachment.html>


More information about the lm-sensors mailing list