[lm-sensors] [RFC] [PATCH] TMP105 : Driver support for the temperature sensor

Datta, Shubhrajyoti shubhrajyoti at ti.com
Fri May 21 16:40:50 CEST 2010



> -----Original Message-----
> From: J.I. Cameron [mailto:jic23 at hermes.cam.ac.uk] On Behalf Of Jonathan
> Cameron
> Sent: Friday, May 21, 2010 6:47 PM
> To: Datta, Shubhrajyoti
> Cc: linux-kernel at vger.kernel.org; linux-omap at vger.kernel.org; linux-
> input at vger.kernel.org; LM Sensors
> Subject: Re: [RFC] [PATCH] TMP105 : Driver support for the temperature
> sensor
> 
> cc'ing lm-sensors (where this should have gone, this has nothing to do
> with input).
> > On 05/21/10 13:17, Datta, Shubhrajyoti wrote:
> >>
> >> Adds the driver support for the TMP105 temperature sensor device. The
> interface is I2C.The driver supports the read of the temperature values.
> >>
> >> Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
> > This device looks at first glance to be pretty similar to the TMP101 as
> supported
> > by the lm75 driver.  Would it make more sense to merge this support into
> that
> > driver?
> >
> > I've not read the data sheets that closely so may have missed something!
Will look at the datasheet.
> >
> > Couple of nitpicks below.
> >> ---
> >>  drivers/hwmon/Kconfig  |   10 ++
> >>  drivers/hwmon/Makefile |    1 +
> >>  drivers/hwmon/tmp105.c |  326
> ++++++++++++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 337 insertions(+), 0 deletions(-)
> >>  create mode 100644 drivers/hwmon/tmp105.c
> >>
> >> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> >> index 68cf877..a4a5352 100644
> >> --- a/drivers/hwmon/Kconfig
> >> +++ b/drivers/hwmon/Kconfig
> >> @@ -1076,6 +1076,16 @@ config SENSORS_MC13783_ADC
> >>          help
> >>            Support for the A/D converter on MC13783 PMIC.
> >>
> >> +config SENSORS_TMP105
> >> +	tristate "Texas Instruments TMP421 and compatible"
> >  TMP105 or TMP421?
> >> +	depends on I2C
> >> +	help
> >> +	  If you say yes here you get support for Texas Instruments TMP105
> >> +	  temperature sensor chips.
> >> +
> >> +	  This driver can also be built as a module.  If so, the module
> >> +	  will be called tmp105.
> >> +
> >>  if ACPI
> >>
> >>  comment "ACPI drivers"
> >> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> >> index 4bc215c..2c4e7a5 100644
> >> --- a/drivers/hwmon/Makefile
> >> +++ b/drivers/hwmon/Makefile
> >> @@ -99,6 +99,7 @@ obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
> >>  obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
> >>  obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
> >>  obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
> >> +obj-$(CONFIG_SENSORS_TMP105)    += tmp105.o
> >>
> >>  ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
> >>  EXTRA_CFLAGS += -DDEBUG
> >> diff --git a/drivers/hwmon/tmp105.c b/drivers/hwmon/tmp105.c
> >> new file mode 100644
> >> index 0000000..8765b11
> >> --- /dev/null
> >> +++ b/drivers/hwmon/tmp105.c
> >> @@ -0,0 +1,326 @@
> >> +/*
> >> + * tmp105.c
> >> + *
> >> + * TMP105 temperature sensor driver
> >> + *
> >> + * Copyright (C) 2010 Texas Instruments
> >> + *
> >> + * Author: Shubhrajyoti Datta <a0393217 at ti.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> modify it
> >> + * under the terms of the GNU General Public License version 2 as
> published by
> >> + * the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License
> >> + * along with this program; if not, write to the Free Software
> >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> USA
> >> +*/
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/init.h>
> >> +#include <linux/i2c.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/hwmon.h>
> >> +#include <linux/hwmon-sysfs.h>
> >> +#include <linux/err.h>
> >> +#include <linux/slab.h>
> >> +
> >> +/* Registers */
> >> +#define		TMP105_TEMP_REG		0x00
> >> +#define		TMP105_CONF_REG		0x01
> >> +#define		TMP105_TLOW_REG		0x02
> >> +#define		TMP105_THIGH_REG	0x03
> >> +
> >> +/* Configuration register parameters */
> >> +#define		TMP105_CONF_SD		0x01
> >> +#define		TMP105_CONF_TM		0x02
> >> +#define		TMP105_CONF_POL		0x04
> >> +#define		TMP105_CONF_F0		0x08
> >> +#define		TMP105_CONF_F1		0x10
> >> +#define		TMP105_CONF_R0		0x20
> >> +#define		TMP105_CONF_R1		0x40
> >> +#define		TMP105_CONF_OS		0x80
> >> +
> >> +#define 	TMP105_I2C_ADDRESS	0x48
> >> +
> >> +#define         MAX_TEMP		128
> >> +#define         MIN_TEMP		-55
> >> +
> >> +/* Each client has this additional data */
> >> +struct tmp105_data {
> >> +	struct i2c_client *client;
> >> +	/* mutex for sysfs operations */
> >> +	struct mutex lock;
> >> +	struct device *hwmon_dev;
> >> +	s16 temp[3];
> >> +	unsigned long last_updated;
> >> +	u8 configuration_setting;
> >> +};
> >> +
> >> +static const u8 tmp105_reg[] = {
> >> +	TMP105_TEMP_REG,
> >> +	TMP105_TLOW_REG,
> >> +	TMP105_THIGH_REG,
> >> +};
> >> +
> >> +static void tmp105_init_client(struct i2c_client *client);
> >> +
> >> +static signed long tmp105_reg_to_mC(s16 val)
> >> +{
> >> +	signed long temp_mC;
> >> +	if (val  & 0x800)
> >> +		val = val - 0x1000 ;
> > Stray space.
Will change it.
> >
> >> +	 temp_mC = (val * 64000) / 1024;
> >> +	 return temp_mC;
> >> +}
> >> +
> >> +static u16 tmp105_C_to_reg(signed long val)
> >> +{
> >> +	val =  (val * 1024) / 64000;
> >> +	if (val < 0)
> >> +		val = val + 0x1000;
> >> +	return (u16)val;
> >> +}
> >> +
> >> +static s16 *tmp105_update_device(struct i2c_client *client,
> >> +						int  index)
> >> +{
> >> +	struct tmp105_data *data = i2c_get_clientdata(client);
> >> +	u8 tmp[2];
> >> +
> >> +	mutex_lock(&data->lock);
> >> +
> >> +	if (time_after(jiffies, data->last_updated +  HZ/4)) {
> >> +		i2c_smbus_read_i2c_block_data(client,
> >> +						tmp105_reg[index], 2, tmp);
> >> +		data->temp[index] = ((tmp[0] << 4) | ((tmp[1] & 0xF0) >> 4));
> >> +		printk(KERN_INFO "Raw temperature: %u\n", data->temp[index]);
> >> +		data->last_updated = jiffies;
> >> +	}
> >> +
> >> +	mutex_unlock(&data->lock);
> >> +	return data->temp[index] ;
> >> +}
> >> +
> >> +static ssize_t show_temp_value(struct device *dev,
> >> +			       struct device_attribute *devattr, char *buf)
> >> +{
> >> +	struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	s16 temperature = tmp105_update_device(client , sda->index);
> >> +	signed long temp_in_mC;
> >> +
> >> +	temp_in_mC = tmp105_reg_to_mC(temperature);
> >> +
> >> +	return sprintf(buf, "%d\n", temp_in_mC);
> >> +}
> >> +
> >> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL
> , 0);
> >> +
> >> +static ssize_t tmp105_set_temp(struct device *dev,
> >> +				struct device_attribute *attr,
> >> +				const char *buf, size_t count)
> >> +{
> >> +	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	struct tmp105_data *tmp105 = i2c_get_clientdata(client);
> >> +	signed long val;
> >> +	int status = 0;
> >> +	u16 temp;
> >> +
> >> +	if ((strict_strtol(buf, 10, &val) < 0))
> >> +		return -EINVAL;
> >> +
> >> +	SENSORS_LIMIT(val , MIN_TEMP , MAX_TEMP);
> >> +
> >> +	mutex_lock(&tmp105->lock);
> >> +
> >> +	temp = tmp105_C_to_reg(val);
> >> +	temp = ((temp & 0xFF0)>> 4) | ((temp & 0xF)<<12);
> > Random spacing
Agree.

> >
> >> +
> >> +	status = i2c_smbus_write_word_data(client, tmp105_reg[sda->index],
> >> +			temp);
> >> +
> >> +	tmp105->temp[sda->index] = temp;
> >> +	mutex_unlock(&tmp105->lock);
> >> +	return status ? : count;
> >> +}
> >> +
> >> +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
> show_temp_value,
> >> +	tmp105_set_temp, 1);
> >> +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
> show_temp_value,
> >> +	tmp105_set_temp, 2);
> >> +
> >> +/* sysfs call */
> >> +static ssize_t set_configuration(struct device *dev,
> >> +				struct device_attribute *attr,
> >> +				const char *buf, size_t count)
> >> +{
> >> +	s32 status;
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	struct tmp105_data *data = i2c_get_clientdata(client);
> >> +	data->configuration_setting = simple_strtoul(buf, NULL, 10);
> >> +	/* I2C write to the configuration register */
> >> +	status = i2c_smbus_write_byte_data(client, TMP105_CONF_REG,
> >> +			data->configuration_setting);
> > What's status for given you don't take any notice of it?
Will add appropriate err message 

> >
> >> +	return count;
> >> +}
> >> +
> >> +static ssize_t show_configuration(struct device *dev,
> >> +				struct device_attribute *attr, char *buf)
> >> +{
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	struct tmp105_data *data = i2c_get_clientdata(client);
> >> +	u8 tmp;
> >> +	i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &tmp);
> >> +	data->configuration_setting = tmp;
> >> +	return sprintf(buf, "%u\n", data->configuration_setting);
> >> +}
> >> +static DEVICE_ATTR(configuration, S_IWUSR | S_IRUGO,
> show_configuration,
> >> +		set_configuration);
> >> +
> >> +
> >> +static struct attribute *tmp105_attributes[] = {
> >> +	&dev_attr_configuration.attr,
> >> +	&sensor_dev_attr_temp1_input.dev_attr.attr,
> >> +	&sensor_dev_attr_temp1_min.dev_attr.attr,
> >> +	&sensor_dev_attr_temp1_max.dev_attr.attr,
> >> +	NULL
> >> +};
> >> +
> >> +static const struct attribute_group tmp105_attr_group = {
> >> +	.attrs = tmp105_attributes,
> >> +};
> >> +
> >> +static int tmp105_probe(struct i2c_client *client,
> >> +			 const struct i2c_device_id *id)
> >> +{
> >> +	struct tmp105_data *tmp105_data;
> >> +	int err;
> >> +
> >> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> >> +		dev_dbg(&client->dev, "adapter doesn't support I2C\n");
> >> +		return -ENODEV;
> >> +	}
> >> +
> >> +	tmp105_data = kzalloc(sizeof(struct tmp105_data), GFP_KERNEL);
> >> +	if (!tmp105_data) {
> >> +		err = -ENOMEM;
> >> +		goto exit;
> >> +	}
> >> +	tmp105_data->client = client;
> >> +
> >> +	i2c_set_clientdata(client, tmp105_data);
> >> +	mutex_init(&tmp105_data->lock);
> >> +
> >> +	/* Initialize the TMP105 chip */
> >> +	tmp105_init_client(client);
> >> +
> >> +	/* Register sysfs hooks */
> >> +	err = sysfs_create_group(&client->dev.kobj, &tmp105_attr_group);
> >> +	if (err)
> >> +		goto exit_free;
> >> +	tmp105_data->hwmon_dev = hwmon_device_register(&client->dev);
> >> +	if (IS_ERR(tmp105_data->hwmon_dev)) {
> >> +		err = PTR_ERR(tmp105_data->hwmon_dev);
> >> +		tmp105_data->hwmon_dev = NULL;
> >> +		goto exit_remove;
> >> +	}
> >> +	return 0;
> >> +
> >> +exit_remove:
> >> +	sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
> >> +exit_free:
> >> +	i2c_set_clientdata(client, NULL);
> >> +	kfree(tmp105_data);
> >> +exit:
> >> +	return err;
> >> +}
> >> +
> >> +static int tmp105_remove(struct i2c_client *client)
> >> +{
> >> +	struct tmp105_data *tmp105 = i2c_get_clientdata(client);
> >> +	hwmon_device_unregister(tmp105->hwmon_dev);
> >> +
> >> +	sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
> >> +	i2c_set_clientdata(client, NULL);
> >> +	kfree(tmp105);
> >> +	return 0;
> >> +}
> >> +
> >> +/* Called when we have found a new TMP105. */
> >> +static void tmp105_init_client(struct i2c_client *client)
> >> +{
> >> +	struct tmp105_data *data = i2c_get_clientdata(client);
> >> +	data->last_updated = jiffies - HZ;
> >> +	mutex_init(&data->lock);
> >> +}
> >> +
> >> +static const struct i2c_device_id tmp105_id[] = {
> >> +	{ "tmp105", 0 },
> >> +	{ }
> >> +};
> >> +
> >> +#ifdef CONFIG_PM
> >> +static int tmp105_suspend(struct device *dev)
> >> +{
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	u8 config_reg;
> >> +	i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1,
> &config_reg);
> >> +	config_reg = config_reg | TMP102_CONF_SD;
> >> +	i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
> >> +	return 0;
> >> +}
> >> +
> >> +static int tmp105_resume(struct device *dev)
> >> +{
> >> +	struct i2c_client *client = to_i2c_client(dev);
> >> +	i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1,
> &config_reg);
> >> +	config_reg = config_reg & ~TMP102_CONF_SD;
> >> +	i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
> >> +}
> >> +
> >> +static struct dev_pm_ops tmp105_dev_pm_ops = {
> >> +	.suspend = tmp105_suspend,
> >> +	.resume = tmp105_resume,
> >> +};
> >> +
> >> +#define TMP105_DEV_PM_OPS (&tmp105_dev_pm_ops)
> >> +#else
> >> +#define TMP105_DEV_PM_OPS NULL
> >> +#endif /* CONFIG_PM */
> >> +
> >> +
> >> +static struct i2c_driver tmp105_driver = {
> >> +	.driver = {
> >> +		.name	= "tmp105",
> >> +		.owner = THIS_MODULE,
> >> +		.pm = TMP105_DEV_PM_OPS,
> >> +	},
> >> +	.probe		= tmp105_probe,
> >> +	.remove		= tmp105_remove,
> >> +	.id_table	= tmp105_id,
> >> +	.class = I2C_CLASS_HWMON,
> >> +};
> >> +
> >> +static int __init tmp105_init(void)
> >> +{
> >> +	return i2c_add_driver(&tmp105_driver);
> >> +}
> >> +
> >> +static void __exit tmp105_exit(void)
> >> +{
> >> +	i2c_del_driver(&tmp105_driver);
> >> +}
> >> +
> >> +MODULE_DESCRIPTION("TMP105 driver");
> >> +MODULE_LICENSE("GPL");
> >> +
> >> +module_init(tmp105_init);
> >> +module_exit(tmp105_exit);
> >> +
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/





More information about the lm-sensors mailing list