[lm-sensors] How to get the OID of lm_sensors'value for SNMP

borat Gunter borat.gunter at googlemail.com
Fri May 28 12:57:23 CEST 2010


Hello everyone,

I have found it out, CPU Temp's value is stored by me under
.1.3.6.1.4.1.2021.13.16.2.1.3.1.
For anyone who concerned.

regards,
borat

On Thu, May 27, 2010 at 2:06 PM, borat Gunter
<borat.gunter at googlemail.com>wrote:

> Hello everyone,
>
> i have the output of sensors:
>
> printsrv:~ # sensors
> lm85-i2c-0-2e
> Adapter: SMBus I801 adapter at 0400
> V1.5:       +1.46 V  (min =  +0.00 V, max =  +3.32 V)
> VCore:      +1.31 V  (min =  +0.00 V, max =  +2.99 V)
> V3.3:       +3.28 V  (min =  +0.00 V, max =  +4.38 V)
> V5:         +5.00 V  (min =  +0.00 V, max =  +6.64 V)
> V12:       +12.12 V  (min =  +0.00 V, max = +15.94 V)
> CPU_Fan:   2115 RPM  (min =    0 RPM)
> fan2:         0 RPM  (min =    0 RPM)
> fan3:      1386 RPM  (min =    0 RPM)
> fan4:         0 RPM  (min =    0 RPM)
> CPU Temp:    +50°C  (low  =  -127°C, high =  +127°C)
> Board Temp:
>              +41°C  (low  =  -127°C, high =  +127°C)
> Remote Temp:
>              +36°C  (low  =  -127°C, high =  +127°C)
> CPU_PWM:   115
> Fan2_PWM:    0
> Fan3_PWM:  115
> vid:      +1.088 V  (VRM Version 10.0)
>
> And now i want to use nagios per snmp to check the "CPU Temp", what do I
> need to do to make the snmp and lm_sensor working together? How do I get the
> OID of that value? I tried with snmpwalk ucdavis.ucdExperimental.lmSensors,
> but there is nothing there.
>
> I'd appreciate for any kind of help.
> thanks in advance.
> borat
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20100528/e6b4273c/attachment.html>


More information about the lm-sensors mailing list