[lm-sensors] [PATCH 01/12] hwmon: lis3: pm_runtime support

Éric Piel eric.piel at tremplin-utc.net
Sun Oct 24 16:03:15 CEST 2010


Op 22-10-10 13:57, Samu Onkalo schreef:
> Add pm_runtime support to lis3 core driver.
> Add pm_runtime support to lis3 i2c driver.
>
> spi and hp_accel drivers are not yet supported. Old always
> on functionality remains for those.
>
> For sysfs there is 5 second delay before turning off the
> chip to avoid long ramp up delay.
>
> Signed-off-by: Samu Onkalo<samu.p.onkalo at nokia.com>
Acked-by: Eric Piel <eric.piel at tremplin-utc.net>

> ---
>   drivers/hwmon/lis3lv02d.c     |   60 +++++++++++++++++++++++++++++++++++++++++
>   drivers/hwmon/lis3lv02d.h     |    1 +
>   drivers/hwmon/lis3lv02d_i2c.c |   54 ++++++++++++++++++++++++++++---------
>   3 files changed, 102 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
> index fc591ae..412ddc3 100644
> --- a/drivers/hwmon/lis3lv02d.c
> +++ b/drivers/hwmon/lis3lv02d.c
> @@ -34,6 +34,7 @@
>   #include<linux/freezer.h>
>   #include<linux/uaccess.h>
>   #include<linux/miscdevice.h>
> +#include<linux/pm_runtime.h>
>   #include<asm/atomic.h>
>   #include "lis3lv02d.h"
>
> @@ -43,6 +44,9 @@
>   #define MDPS_POLL_INTERVAL 50
>   #define MDPS_POLL_MIN	   0
>   #define MDPS_POLL_MAX	   2000
> +
> +#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */
> +
>   /*
>    * The sensor can also generate interrupts (DRDY) but it's pretty pointless
>    * because they are generated even if the data do not change. So it's better
> @@ -262,6 +266,18 @@ static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
>   	mutex_unlock(&lis3_dev.mutex);
>   }
>
> +static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
> +{
> +	if (lis3_dev.pm_dev)
> +		pm_runtime_get_sync(lis3_dev.pm_dev);
> +}
> +
> +static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
> +{
> +	if (lis3_dev.pm_dev)
> +		pm_runtime_put(lis3_dev.pm_dev);
> +}
> +
>   static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
>   {
>   	if (!test_bit(0,&lis3_dev.misc_opened))
> @@ -356,6 +372,9 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
>   	if (test_and_set_bit(0,&lis3_dev.misc_opened))
>   		return -EBUSY; /* already open */
>
> +	if (lis3_dev.pm_dev)
> +		pm_runtime_get_sync(lis3_dev.pm_dev);
> +
>   	atomic_set(&lis3_dev.count, 0);
>   	return 0;
>   }
> @@ -364,6 +383,8 @@ static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
>   {
>   	fasync_helper(-1, file, 0,&lis3_dev.async_queue);
>   	clear_bit(0,&lis3_dev.misc_opened); /* release the device */
> +	if (lis3_dev.pm_dev)
> +		pm_runtime_put(lis3_dev.pm_dev);
>   	return 0;
>   }
>
> @@ -460,6 +481,8 @@ int lis3lv02d_joystick_enable(void)
>   		return -ENOMEM;
>
>   	lis3_dev.idev->poll = lis3lv02d_joystick_poll;
> +	lis3_dev.idev->open = lis3lv02d_joystick_open;
> +	lis3_dev.idev->close = lis3lv02d_joystick_close;
>   	lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
>   	lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN;
>   	lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX;
> @@ -512,12 +535,30 @@ void lis3lv02d_joystick_disable(void)
>   EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
>
>   /* Sysfs stuff */
> +static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3)
> +{
> +	/*
> +	 * SYSFS functions are fast visitors so put-call
> +	 * immediately after the get-call. However, keep
> +	 * chip running for a while and schedule delayed
> +	 * suspend. This way periodic sysfs calls doesn't
> +	 * suffer from relatively long power up time.
> +	 */
> +
> +	if (lis3->pm_dev) {
> +		pm_runtime_get_sync(lis3->pm_dev);
> +		pm_runtime_put_noidle(lis3->pm_dev);
> +		pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY);
> +	}
> +}
> +
>   static ssize_t lis3lv02d_selftest_show(struct device *dev,
>   				struct device_attribute *attr, char *buf)
>   {
>   	int result;
>   	s16 values[3];
>
> +	lis3lv02d_sysfs_poweron(&lis3_dev);
>   	result = lis3lv02d_selftest(&lis3_dev, values);
>   	return sprintf(buf, "%s %d %d %d\n", result == 0 ? "OK" : "FAIL",
>   		values[0], values[1], values[2]);
> @@ -528,6 +569,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
>   {
>   	int x, y, z;
>
> +	lis3lv02d_sysfs_poweron(&lis3_dev);
>   	mutex_lock(&lis3_dev.mutex);
>   	lis3lv02d_get_xyz(&lis3_dev,&x,&y,&z);
>   	mutex_unlock(&lis3_dev.mutex);
> @@ -537,6 +579,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
>   static ssize_t lis3lv02d_rate_show(struct device *dev,
>   			struct device_attribute *attr, char *buf)
>   {
> +	lis3lv02d_sysfs_poweron(&lis3_dev);
>   	return sprintf(buf, "%d\n", lis3lv02d_get_odr());
>   }
>
> @@ -549,6 +592,7 @@ static ssize_t lis3lv02d_rate_set(struct device *dev,
>   	if (strict_strtoul(buf, 0,&rate))
>   		return -EINVAL;
>
> +	lis3lv02d_sysfs_poweron(&lis3_dev);
>   	if (lis3lv02d_set_odr(rate))
>   		return -EINVAL;
>
> @@ -585,6 +629,17 @@ int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
>   {
>   	sysfs_remove_group(&lis3->pdev->dev.kobj,&lis3lv02d_attribute_group);
>   	platform_device_unregister(lis3->pdev);
> +	if (lis3->pm_dev) {
> +		/* Barrier after the sysfs remove */
> +		pm_runtime_barrier(lis3->pm_dev);
> +
> +		/* SYSFS may have left chip running. Turn off if necessary */
> +		if (!pm_runtime_suspended(lis3->pm_dev))
> +			lis3lv02d_poweroff(&lis3_dev);
> +
> +		pm_runtime_disable(lis3->pm_dev);
> +		pm_runtime_set_suspended(lis3->pm_dev);
> +	}
>   	return 0;
>   }
>   EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
> @@ -685,6 +740,11 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
>   	lis3lv02d_add_fs(dev);
>   	lis3lv02d_poweron(dev);
>
> +	if (dev->pm_dev) {
> +		pm_runtime_set_active(dev->pm_dev);
> +		pm_runtime_enable(dev->pm_dev);
> +	}
> +
>   	if (lis3lv02d_joystick_enable())
>   		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
>
> diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
> index 8540913..3e8a208 100644
> --- a/drivers/hwmon/lis3lv02d.h
> +++ b/drivers/hwmon/lis3lv02d.h
> @@ -214,6 +214,7 @@ struct axis_conversion {
>
>   struct lis3lv02d {
>   	void			*bus_priv; /* used by the bus layer only */
> +	struct device		*pm_dev; /* for pm_runtime purposes */
>   	int (*init) (struct lis3lv02d *lis3);
>   	int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
>   	int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
> diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
> index 8e5933b..6e965d7 100644
> --- a/drivers/hwmon/lis3lv02d_i2c.c
> +++ b/drivers/hwmon/lis3lv02d_i2c.c
> @@ -29,6 +29,7 @@
>   #include<linux/init.h>
>   #include<linux/err.h>
>   #include<linux/i2c.h>
> +#include<linux/pm_runtime.h>
>   #include "lis3lv02d.h"
>
>   #define DRV_NAME 	"lis3lv02d_i2c"
> @@ -95,6 +96,7 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
>   	lis3_dev.write	  = lis3_i2c_write;
>   	lis3_dev.irq	  = client->irq;
>   	lis3_dev.ac	  = lis3lv02d_axis_map;
> +	lis3_dev.pm_dev	  =&client->dev;
>
>   	i2c_set_clientdata(client,&lis3_dev);
>   	ret = lis3lv02d_init_device(&lis3_dev);
> @@ -104,21 +106,20 @@ fail:
>
>   static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
>   {
> -	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
>   	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
>
>   	if (pdata&&  pdata->release_resources)
>   		pdata->release_resources();
>
>   	lis3lv02d_joystick_disable();
> -	lis3lv02d_poweroff(lis3);
>
>   	return lis3lv02d_remove_fs(&lis3_dev);
>   }
>
>   #ifdef CONFIG_PM
> -static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
> +static int lis3lv02d_i2c_suspend(struct device *dev)
>   {
> +	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
>   	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
>
>   	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
> @@ -126,18 +127,21 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
>   	return 0;
>   }
>
> -static int lis3lv02d_i2c_resume(struct i2c_client *client)
> +static int lis3lv02d_i2c_resume(struct device *dev)
>   {
> +	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
>   	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
>
> -	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
> +	/*
> +	 * pm_runtime documentation says that devices should always
> +	 * be powered on at resume. Pm_runtime turns them off after system
> +	 * wide resume is complete.
> +	 */
> +	if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
> +		pm_runtime_suspended(dev))
>   		lis3lv02d_poweron(lis3);
> -	return 0;
> -}
>
> -static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
> -{
> -	lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
> +	return 0;
>   }
>   #else
>   #define lis3lv02d_i2c_suspend	NULL
> @@ -145,6 +149,24 @@ static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
>   #define lis3lv02d_i2c_shutdown	NULL
>   #endif
>
> +static int lis3_i2c_runtime_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> +	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
> +
> +	lis3lv02d_poweroff(lis3);
> +	return 0;
> +}
> +
> +static int lis3_i2c_runtime_resume(struct device *dev)
> +{
> +	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> +	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
> +
> +	lis3lv02d_poweron(lis3);
> +	return 0;
> +}
> +
>   static const struct i2c_device_id lis3lv02d_id[] = {
>   	{"lis3lv02d", 0 },
>   	{}
> @@ -152,14 +174,20 @@ static const struct i2c_device_id lis3lv02d_id[] = {
>
>   MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
>
> +static const struct dev_pm_ops lis3_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
> +				lis3lv02d_i2c_resume)
> +	SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
> +			   lis3_i2c_runtime_resume,
> +			   NULL)
> +};
> +
>   static struct i2c_driver lis3lv02d_i2c_driver = {
>   	.driver	 = {
>   		.name   = DRV_NAME,
>   		.owner  = THIS_MODULE,
> +		.pm     =&lis3_pm_ops,
>   	},
> -	.suspend = lis3lv02d_i2c_suspend,
> -	.shutdown = lis3lv02d_i2c_shutdown,
> -	.resume = lis3lv02d_i2c_resume,
>   	.probe	= lis3lv02d_i2c_probe,
>   	.remove	= __devexit_p(lis3lv02d_i2c_remove),
>   	.id_table = lis3lv02d_id,





More information about the lm-sensors mailing list