[lm-sensors] Alix 2D2

Jean-Denis Girard jd.girard at sysnux.pf
Tue Aug 16 18:33:50 CEST 2011


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,

I have a small system built around an Alix 2D2 motherboard. lm_sensors
used to work fine using the scx200_axb and lm90 modules, I was able to
get this:

[admin at localhost ~]$ sensors
lm86-i2c-0-4c
Adapter: CS5536 ACB0
temp1:       +40.0°C  (low  =  +0.0°C, high = +70.0°C)
                      (crit = +85.0°C, hyst = +75.0°C)
temp2:       +45.9°C  (low  =  +0.0°C, high = +70.0°C)
                      (crit = +85.0°C, hyst = +75.0°C)

But for some time now, it no longer works. I load the same modules, but
it seems like the lm90 is no longer seen, though the module loads fine.
All I get in the logs is:
	scx200_acb: NatSemi SCx200 ACCESS.bus Driver
	i2c /dev entries driver

I'm using lm_sensors-3.3.0, and kernel-3.0.1 (config attached).

sensors-detect output:

Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `scx200_acb' for device 0000:00:0f.0: CS5536 [Geode
companion] ISA
Module scx200_acb loaded successfully.
Module i2c-dev loaded successfully.

Sorry, no sensors were detected.

What am I missing ?


Thanks,
- -- 
Jean-Denis Girard

SysNux                  Systèmes  Linux  en Polynésie française
http://www.sysnux.pf/   Tél: +689 50 10 40 / GSM: +689 79 75 27

-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAk5Km+4ACgkQuu7Rv+oOo/gZQQCfaYHgEWkSZcxsPkBIcs1C4wrs
+8wAnRJ3ZBJ3YwTPHG4DMEpjIE8kD4f7
=G4E8
-----END PGP SIGNATURE-----
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config-3.0.1-sysnux-ix100-test.bz2
Type: application/x-bzip2
Size: 11685 bytes
Desc: not available
URL: <http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20110816/5fcd0cd1/attachment.bz2>


More information about the lm-sensors mailing list