[lm-sensors] [PATCH v5 00/11] hwmon: (w83627ehf) Add support for NCT6775F and NCT6776F

Guenter Roeck guenter.roeck at ericsson.com
Wed Mar 16 16:20:22 CET 2011


On Wed, Mar 16, 2011 at 05:49:20AM -0400, Michiel wrote:
> Hi,
> 
> I installed the stand alone module you created for the nct6775f and
> basic functionality seems OK. Although the voltage sensor readings seem
> a bit nonsensical. This is on an ASRock 870iCafe motherboard.
> ( http://www.asrock.com/mb/overview.asp?Model=870iCafe )
> 
Thanks for testing.

The voltage values are not surprising; you'll have to figure out actual voltages
and add scaling factors to sensors3.conf.

> It has 2 4pin fan connectors and 1 3pin connector. I'm still trying to
> configure those for use with fancontrol. But I'm not there yet..
> 
> Thanks for all time and hard work you punt in to lm-sensors ! :-)
>  
> > k10temp-pci-00c3
> > Adapter: PCI adapter
> > temp1:       +17.5��C  (high = +70.0��C)                  
> > 
> > nct6775-isa-0290
> > Adapter: ISA adapter
> > in0:         +0.99 V  (min =  +0.00 V, max =  +1.74 V)   
> > in1:         +1.85 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in2:         +3.41 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in3:         +3.41 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in4:         +0.06 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in5:         +1.67 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in6:         +1.70 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in7:         +3.44 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > in8:         +3.39 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> > fan1:       1095 RPM  (min =    0 RPM, div = 8)  ALARM
> > fan2:       1095 RPM  (min =    0 RPM, div = 8)  ALARM
> > fan3:       1180 RPM  (min =    0 RPM, div = 8)  ALARM
> > SYSTIN:      +30.0��C  (high =  +0.0��C, hyst =  +0.0��C)  ALARM  sensor = thermistor
> > CPUTIN:      +26.5��C  (high = +80.0��C, hyst = +75.0��C)  sensor = thermistor
> > AUXTIN:      -12.5��C  (high = +80.0��C, hyst = +75.0��C)  sensor = thermistor

Must be pretty cold where you live ;).

Guenter




More information about the lm-sensors mailing list