[lm-sensors] Zotac ION ITX-G Synergy Edition

Josu Lazkano josu.lazkano at gmail.com
Fri Sep 23 13:28:48 CEST 2011


Hello all, this is my first post on the list. I am searching for some
help to check my board sensors. I have a ZOTAC ION ITX-G Synergy
Edition board with Debian Squeeze (2.6.32), it has MCP79 and it is
supported by lm-sensors.

I have some problems with my board voltage and I want to check all
sensors available. When I execute "sensors" this is the output:

# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +27.0°C  (crit = +90.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +29.0°C  (crit = +90.0°C)

This is just CPU temperature. Is it possible to get more info about my board?

I read some forums and I found this interesting things:

# modprobe i2c-dev
# modprobe i2c-nforce2
# echo "10de 0aa2" > /sys/bus/pci/drivers/nForce2_smbus/new_id
# i2cdetect -l
i2c-0	smbus     	SMBus nForce2 adapter at 4d00   	SMBus adapter
i2c-1	i2c       	cx23885[0]                      	I2C adapter
i2c-2	i2c       	cx23885[0]                      	I2C adapter
i2c-3	i2c       	cx23885[0]                      	I2C adapter
i2c-4	i2c       	NVIDIA i2c adapter 0 at 3:00.0  	I2C adapter
i2c-5	i2c       	NVIDIA i2c adapter 2 at 3:00.0  	I2C adapter
i2c-6	i2c       	NVIDIA i2c adapter 3 at 3:00.0  	I2C adapter

I don't know what I am doing with the echo command, but it looks like
it found some i2c devices.

I will appreciate any help on this, I read lots of webs but I don't
understand kernel/module compiling.

Thanks and best regards.

-- 
Josu Lazkano




More information about the lm-sensors mailing list