[lm-sensors] sensors3.conf settings for IT8728F / GA-H67MA-UD2H
combuster at archlinux.us
Sun Jan 22 21:04:43 CET 2012
These are the settings for IT8728F on GA-H67MA-UD2H (and possibly other
P65/H61/H67 Gigabyte boards)
Testing was done on Arch Linux, 3.3-rc1 custom kernel and lm_sensors
If anyone have suggestions to make this better, or if there are any
users that can confirm if other models from Gigabyte coresponds to these
settings, that would be great.
Jean, could you please add this to other GA boards on the wiki, after
eventual changes and/or confirmations from other users?
label in0 "Vtt"
set in0_min 1.02 # I'm liberal with these, 2-3% tops
set in0_max 1.08 # after that, cpu gets very unstable
# label in1 "+3.3V"
# set in1_min 3.14 # Some boards including GA-H67MA-UD2H
# set in1_max 3.47 # don't have 3.3V voltage reading
label in2 "+12V"
set in2_min 11.40 # according to ATX 12V PSU design guide
set in2_max 12.60 #
ignore in3 # reports 3VSB
ignore in4 # really don't know what's this one for
label in5 "Vcore"
set in5_min 0.65
set in5_max 1.50 # heavy o/c
label in6 "Vdram"
set in6_min 1.45 # adjust these, 1.35 for LVDDR3
set in6_max 1.55 # 1.5V is recommended, 1.65 tops
label in7 "3VSB"
set in7_min 3.14
set in7_max 3.47
label in8 "Vbat"
label fan1 "CPU fan"
set fan1_min 700
label fan2 "System fan"
set fan2_min 0
label temp1 "PCH temp"
set temp1_min 10
set temp1_max 60 # seen those rising to 55C
label temp2 "CPU temp"
set temp2_min 10
set temp2_max 85
compute in1 1.649*@,@/1.649 # multipliers provided by
compute in2 4.090*@,@/4.090 # Martin Malik author of hwinfo
More information about the lm-sensors